How to make the pdf's clearer better quality?
When i try plotting to dwg to pdf using dwg to pdf.pc3 plotter, the pdf's is bad quality, text is unclear in some areas and lines is "out of focus".
I have tried recreating the pc3 file with no luck.
I am using autocad 08 LT and everytime i plot to pdf using standard cad dwg to pdf.pc3 the txt turns out bold.
View 9 Replies View RelatedI designed an advert. The newspaper requested the advert be sent in as a pdf at 300dpi.
I met the requirements and e-mailed the advert to the newspaper.
However, after being printed, the text was very hazy, fuzzy and unreadable, although the picture was clear.What caused the unclear text?
The pickbox keeps turning into a rectangle and not a perfect square. It's width is less than its height. This keeps happening and is annoying. When I close AutoCAD 2012 and then reopen the drawing its a square, but soon turns into a rectangle.
View 4 Replies View RelatedI have a little problem with autocad 2012. When I open a dwg in autocad 2012 some hatch turns solid, but same dwg is fine in autocad 2011 or previous versions. What is interesting if I am in autocad 2012 and i click on the hatch and change something on the properties and i click enter it turns normal to what it should be. So i click on the hatch again change back the whatever it was previously and hit enter. I regen everything and its still fine. So basically i did nothing to it and its fixed. So this might be bug I am not sure. So after all this, i save the dwg and exit. I re-open the dwg again in autocad 2012 the hatch is back to solid. What is very interesting in autocad 2011 everyhing is fine no hatch problems at all. I attached two pdfs as to what it should looks like when its correct hatch and what it looks like when i open it.
View 9 Replies View RelatedIf my SNAP is turned OFF it automatically turns itself ON when i draw some linework. It keeps doing this in certain 2D only cad files. As a temporary fix i have tried to set my snap spacing to .0001 to keep the crosshairs running smoothly but they still appear excessively jumpy at about 1 unit. This only happens in plotable drawings that contain a certain 2D xref and the offending xref itself. If i unload all the xrefs the problem DISAPPEARS, although this doesn't let me draft any easier!
My OSNAP is working fine although it does reset itself when i have been using certain LISP routines.
FYI, if I open the same drawing on another users computer the SNAP stays off and the crosshairs run smooth.
I'm inserting a data link from excel into my CAD drawing and every time I try to select the table it brings in, the corner "grips" the green plus signs, are so huge they are bigger than my sheet and I can't see anything in the table. Any way to shrink them to a rational size?
View 2 Replies View RelatedUsing 2011 with a PDF underlay. When the drawing is plotted as a PDF and the new PDF is opened, parts of the PDF portion of thew drawing are green. Changing the transparency, contrast, fade etc. of the underlay hasn't worked. I don't want to save the PDF underlay as an earlier PDF version because I'm snapping to parts of the underlay.
View 7 Replies View RelatedWhen I use the Layer Isolate command, then use the Layer Unisolate command, everything seems to work fine, as far as displaying the correct layers again. However, when I go to the Layer Manager, I noticed that all frozen or frozen in current viewport are also turned off.
LAYISO set to OFF (use fade?)
This only happens in a maximized viewport, not in model space.
I'am a quite expert Autocad user, but I have now a version wich seems to have some problem in plotting using Monochrome.ctb or Grayscale.ctb
If I choose one (It's the same problem with both), all the coloured layer in the layout visualization become black of course, but if I preview or I print it, the pdf created has all layer's colours.
of course the PLOT WITH PLOT STYLES box is checked.
when i try to plot a layout or modelspace with a pdf xref'ed into it, to a new pdf, the resulting pdf is illegible - first off it becomes rasterized even though it's a vector document produced from word, and secondly it is extremely low quality. I have looked far and wide for settings that might work with this but I have come up empty -
View 9 Replies View RelatedThe AR-Sand hatch is visible in a published pdf file, but does not plot.
View 1 Replies View RelatedI am trying to plot a paper space as JPG, the drawing scale is 1:1 the paper is the size an a4 page, I tried using the publish to web JPG.pc3 but the lines come out as gray and faint, I tried all the different combination of pixels and scale but without success!
View 5 Replies View RelatedIm trying to print a logo for my detachment using Autocad to PDF but for one the line dont show up in the PDF file and second the original color of the drawing is faded. Black goes to a smoke grey color, lines dont show up, and the red is blurry. I need this to be fixed but I just dont have the skill to do it. And stupid autocad doesnt have a contact number for step by step instructions with an actual human! Im trying to use the logo for a T-shirt but it seems like I cannot for the life of me print a suitable digital image for it. I am using AutoCad ARCH 12...
View 4 Replies View RelatedI'm not sure this is AutoCad related or Adobe but I'll start here if you don't mind. Windows 7, AutoCad 2011 and Adobe 2013 reader. When I plot using AutoCad's plot to .pdf the .pdf displays. I want to stop this display.
View 5 Replies View RelatedWhen plotting some files to pdf using the "dwg to pdf" as well as the "adobe pdf" some of the lines show two different lineweights. Some of the text displays two lineweights as well. It does not seem to happen with all drawings. The adobe version is better than the dwg to pdf but still not as good as plotting directly to the plotter from acad.
View 9 Replies View RelatedWhen I do a Batch plot, I am getting an error message stating that my background plotting is on. I can't do any batch plotting with this on. How do I turn this off?
View 2 Replies View RelatedI have a drawing and when I go to plot the drawing the border on 2 sides get s cut off. I preview and all looks right, but the hard-copy has the borders cut off. Is this a cad setting or a printer issue (other programs work fine and PDFs of drawings are good to).
View 2 Replies View RelatedI have checked every setting and have even redrawn the file where the error occurs. We send out for prints to a printing company as we do not have a plotter so I need to fix this. When the file is converted to a pdf. the "sand hatch" seems to be printing at an inconsistant lineweight all within the same section. This error occurs when printing from a DWG to export to an Adobe PDF. The hatch is all on the same layer same settings and drawn in the same action period. it makes no sense why it would change when all the settings are exactly the same.
I have also tried drawing them on a new layer i created matching the same layer settings and it still converts inconsistant in the same two areas. I have completely erased that section of drawing and redrew it not changing out of any tools or settings and it just keeps doing it. I have also tried checking all the pdf settings and tried plotting it different ways and it wont dissapear. The only time it does not show up is when i export a window shot directly from model space.
But i need to print it from paperspace and this is where the error occurs. It almost seems as though the export is not processing the drawing corretly as it is converting the drawing but i dont know how to fix it. I first noticed the problem when i recieved the prints back from the printer as you can clearly see the hatch appears thicker and darker in two sections along the same hatch. I then looked at the pdf and it appeared fine, but as i zoomed in on the pdf up to 300% that is when you notice the change.
So we have started some work overseas and I have been trying to make sense of the metric units in CAD. Metric units in general, make way more sense then imperial units but how they work in CAD has been confusing.
I am familiar with the UNITS command and have changed the drawing units to "decimal" and the insertion units to "unitless"
I know that when you draw a 1 unit line in model space it could represent a 1 millimeter line or a 1 meter line and that it is up to the drafter to decide what it will be. I also am familiar with setting up dim styles to dimension correctly based off of whether you are drawing in meters or millimeters.
I have set my Adobe pdf printer to A1 23.4" X 33.1" (594mm x 841mm). when I draw a 1 unit line in paper space and print the layout the 1 unit line measures 1 inch?
I am having a problem with pltting files to pdf that contain a pdf underlay. When I do this, the pdf underlay part comes out fuzzy and unreadable. If I plot to paper, everything is fine.
I am using the standard pdf plotter and my own ctb file. Autocad 2012 and Adobe Acrobat x standard.
I didn't have this issue at my last employment with autocad c3d 2010 and acrobat 9 pro
I am having issues batch plotting in LT 2010.
I am using Windows Vista.
I go to the batch plot. Load the drawings I want to plot. I then load the page setup I want to use. None of the files plot. The error says that the device doesn't support the output size.
The weird thing is that I can plot using those same page setups individual files, just not as a batch.
I have a drawing that has xref's that some of the xref do not plot.
Import the xref it will not plot.
Insert the xref and explosed it and it will not plot.
I have check the layers that everything is on and they are set right to plot.
Never ran into these problem before working 20 years this Autodesk.
I need to be able to import the airfoil geometry of a NACA 2412 airfoil. I know how to get the XY coordinates but I don't know how to import these points (as a .txt file?) into ACAD. What function would I use? Spline? If so how do I get it to draw all the points I have? I need to then extrude the shape to be able to mill airfoil sections...that part I can figure out....just need to import the points to get a nice curve.
View 9 Replies View RelatedI usually make pdf's by plotting each layout to pdf then combining them with adobe acrobat. Recently i have tried the batch plot to pdf and found that i like it much better but im having a problem with it. I have set up my page sheet manager and have imported my plot sheet settings from a different file. I have checked and double checked that the settings on this file is correct.
My problem is that when i create the batch plot and select the page setup when i create the pdf it cut the left and right side of the page off like there are margins or something. I have created a pdf my plotting to pdf on an individual page and printed it and compared to my batch plot and they are the same scale and size on the paper but the batch plot cuts it off on the sides. I need to get it to print like the plot to pdf so that it is to scale.
I recently upgraded from ACAD 2004 to ACAD 2012. In ACAD 2004, plotting was extremely quick. In ACAD 2012, plotting seems to be extremely slow. A basic drawing in 2004 plotted as a pdf file using CUTE PDF or PDF Creator would take about 5-10 seconds. In ACAD 2012, a similar file using the same CUTE PDF or PDF Creator will take up to 2-3 minutes. Not a long time but when you are plotting a dwg set that has up to 10 tabs in it, it takes 20-30 minutes just to plot. Is there any way to speed up the plotting in ACAD 2012? I have both ACAD 2004 and ACAD 2012 loaded on the same computer.
View 4 Replies View RelatedMy company just got new computers, I've loaded 2012 SP1 and our lisp comands on every machine. After a plot, when someone goes to save and close the drawing, AutoCAD crashes. It does not matter which plot device is used, the result is the same. This includes the plot devices included in AutoCAD. I have reinstalled autocad on one machine, no lisp commands, same result. I have already tried some of the fixes proposed in other threads, nothing has worked.
System:
Win7 64 bit
i7 930
6Gb RAM
Radeon HD 6450
While batch plotting to a multi page PDF in AutoCad 2012 using Adobe Acrobat:
My pages come out with a blank / empty viewport,
The title block is on the page and nothing else plots on the page.
This is only happening with one of the files I am working in. Other DWGs are PDFing normal.
In the plot dialog box the options Plot paperspace last and Hide paperspace objects are only supposed to be available in Paperspace however they show up as checked in some of our drawings when plotting from Modelspace. They should be greyed out then. (see attached) If I copy/paste all objects into a new drawing everything is fine. If I delete all layout tabs the options are still checked when plotting in model space.
The only thing I can figure is there are paperspace entities in my model space or that somehow paperspace is leaking through into modelspace.
I have a tif background that shows up in my pdf plot preview, but it will not actually print. All I get is a pdf showing the linework. I've recently switched from 2008 to 2010 and am wondering if that has anything to do with it as I had no problems in the past? While the tif file is large, it always plotted in 2008.
View 7 Replies View RelatedI have a question I have a logo that we use the color 5 Blue in when we print to the copier it prints exactly, but when we plot the same drawing to the plotter the the color looks like a purple shade instead of a Royal Blue.
View 6 Replies View Related