Xara :: How To Print And Export Transparency
Jul 4, 2013
Reading the Help document it says that transparency in a document is rendered as a bitmap when printing because PostScript can't handle it. This is also the case when exporting to certain file formats.
Isn't there a better solution to this? There are some truly magnificent tools in Xara and I'm sure this means that the technology is there to render documents in a suitable form when printing and exporting.
I've just tried to get a simple logo using some flat transparency from Xara into a Microsoft product and the transparent parts have given me big headaches as I want a true vector solution. The only way I found to work was going via Adobe Illustrator. If Illustrator can do it then why can't Xara? Isn't there some way that Xara can analyse the parts with transparency and create new vector objects where possible?
How does everyone else handle this - do you all simply ignore the transparency tool and work without it?
View 9 Replies
ADVERTISEMENT
Aug 8, 2013
I think this is related to Xara's inability to export alpha transparency properly. I've talked about this before, somewhere. Feel free to find the old post.
The thing is, without a decent export the feature is largely useless isn't it? .Xar is almost never the destination format.
I can get round the edges issue by printing to PDF instead of exporting, but then the bounds of the original bitmaps are visible. So neither solution is any good at all. Surely this is a massive problem?
View 9 Replies
View Related
Dec 19, 2013
I have a client who asked me to create artwork for a banner she is printing for a trade show. The banner is 19.5 FEET long and almost 8 feet high. I have designed the banner as 6.5x2.6ft with the intent of then dividing it into 9 equal parts which I would blow up to 6.5x2.6 and send off to the printer. So far so good. The problem is that the segments are still so large that when I try to export them as PDFs, I am running out of memory. I tried doing them as jpegs, but when I change the resolution for export to 300dpi, nothing changes- the number of pixels x umber of pixels doesn't increase. My client needs this artwork off to her printer asap and I am at a complete loss.
View 4 Replies
View Related
Nov 1, 2013
i have been trying for the past hour to export these two files as pdfs for large format print. everything exports fine except the gold trophy design, how to export these for use for large format solvent printing, i normally dont have a problem but this golden shield vector appears to be the problem.
View 5 Replies
View Related
Mar 17, 2011
I have no problem with transparency in Xtreme. I cannot seem to get it to translate to the internet. When I convert to PNG or Gif I get no transparency just a black rectangle.
View 9 Replies
View Related
Jun 28, 2013
I have an image that I need to export as a PNG with a transparent background.
In PGD 2013 it works fine - PNG is saved with a transparent background.
However, in PGD 9, it saves with a white (non-transparent) background.
There was a warning dialog about transparency pop up the first time I used PGD 9 to export the PNG, but I can't remember exactly what it said - something about transparency not supported for this type of file I think. I chose to ignore always and I can't find anywhere I can re-enable that option to see if it fixes things.
View 9 Replies
View Related
Feb 1, 2011
Import a photo image which is, for example, 100px high by 500px long. Now apply a simple fade transparency from the left edge to 100% transparent 100px in from the left edge (i.e. 400px of the image's length is now 'invisible').
Export this as a png and then import this png. It will still be 100 x 500 - can you tell Xara export the image truncated down just the 'visible' portion (i.e. 100 x 100)?
View 6 Replies
View Related
Sep 10, 2013
How to make a Contour object transparent? In below example is set a 1 step contour on the star, setting transparency the yellow is transparent but the grey not.
Contour_Transp.xar
I am aware that the star could be turned to editable shape, after clone and subtract so the transparency could be controlled on both shapes, but is there maybe some other way?
Also could be a way of course to set outline for the star and not contour, but I do not like as in that case the line half inside and half outside of the shape.
View 5 Replies
View Related
Jan 5, 2012
this is not rocket science either [nothing much I do is, is it ] and to some it will be well known
to others it might be instructive, and if nothing else it's a free 'complementary-complement' palette [ couldn't resist that ]
View 3 Replies
View Related
Jan 26, 2011
When I apply simple flat transparency to a line, or a shape with an outline, it becomes translucent - as expected.
But when I apply a linear (or circular / elliptical / conical etc) transparency, only the fill is affected, and the line remains opaque
[Using Xara Designer Pro 6.1.2.13287]
View 9 Replies
View Related
Apr 20, 2011
Designer Pro 6: I've made round cornered pix for a catalog. I export as a PNG and the corners show black in the Web app I'm using, but they are transparent so it's OK. The last set of pix were done in Xara Xtreme 5, when I exported those as PNGs the corners were white, and the transparency was OK. My question is why the white or black corners, and is there something I can do that will control that? I used the same approach in Designer as in Xtreme 5.
View 5 Replies
View Related
Jul 1, 2012
is there maybe method to remove the transparency from an object with key shortcut?
So faster than selecting the object, clicking on Transparency tool and selecting in menu No transparency
View 5 Replies
View Related
Dec 11, 2011
how to invert the transparency tool on a circular shape, so that the edges are coloured and the centre is clear..?
View 3 Replies
View Related
Aug 31, 2011
This is probably super simple. I do a lot of transparency stuff for the Web. My background color for the most part turns out to be black. I get my transparency but the program I'm using at the moment does a cleaner job with white. When it's black I see a little trash of black around the edge of the graphic. In the past I've come up with white quite by accident and it was clean as a whistle. I'm exporting as PNG, True Color + Alpha.
View 3 Replies
View Related
Jul 24, 2011
I have been meaning to cover this in one of the Workbooks and maybe some day I will remember.
I cloned the original photo, applied a Circular, Stained Glass transparency to the clone, moved the center of the transparency over the Datura blossoms, reduced the diameter, and reversed the settings.
In a few seconds I dramatically changed the photo.
I cloned the second photo of dramatic smoke from the recent wildfire, applied a vertical Linear, Stained Glass transparency to the clone, starting at the dark portion of the bottom of the cloud at 0% and ending just above the mountain tops at 100%.
Again, in less than the time it would take to open Photoshop, I had dramatically enhanced an already dramatic photo.
View 6 Replies
View Related
Jun 18, 2013
I used Graphics & Photos 2013, I update the software yesterday and if I save my job as PDF, the transparency done on a picture is inverted.Currently I removed the transparency but it is not the solution.Issue appear only when I create a PDF file. By creating a JPG file it works.
View 9 Replies
View Related
Feb 14, 2013
I am on Xara Photo & Graphic Designer 2013.I have a headshot that I can cut out of a larger photo using the freehand tool to trace the edges and then subtract the background that I want cropped out.
Now, I'm trying to figure out how I can apply some kind of transparency to the edges to soften them up a bit so they aren't so stark and will overlay nicely over my site background once the image is uploaded.
View 3 Replies
View Related
Jul 20, 2011
how to use PNG with transparency as "photo frame" for bitmap (photo) in Xara Xtreme Pro v5?
I'm try to design pages for photo book in Xtreme. I have set of files in PNG format as "frames" for photos. For example, I attach one (14_v.png) to this message. In another editor I can use them as "masks" for photos - in second attach (capture.png) you can see on left - usual photo, on right - photo with mask as photo frame. How I can make same effect in Xara Xtreme? I try to use different modes, substract/add shapes and other - but no luck.
View 9 Replies
View Related
Jun 23, 2012
I have photo & graphic designer 7 and want to know if its possible to remove the background from a file and save with transparency?
View 9 Replies
View Related
Apr 17, 2013
I'm a new user to Xara and to graphics program in general. I'm using Xara Photo & Graphic Designer 2013 and wish to convert a JPEG image (my company logo) so that it's a PNG file with full transparency. how (or if) I can do this.
View 9 Replies
View Related
Oct 6, 2013
I keep trying to print an inkjet on an wide format Epsom and I can get it to lay down heavy ink. I can print it 13 but not in 15.
View 8 Replies
View Related
Jul 30, 2011
I´m making a homepage with a fixed background. Bute the header isn´t fixed. It´s a space background and has to be transparent.
How can I save a image, without making the transparent parts white?
View 2 Replies
View Related
Jan 26, 2011
I am having problems trying to produce an image with reflections. I have been doing it in the past with Xara4. My procedure is to take a number of images, create copies of them, flip them then add transparency once they are in place as refelctions. These are all placed onto a dark background; reflections are stretching beyond the background at this stage. And in the past if I select all, then Arrange>Combine Shapes>Intersect Shapes then I can have the whole image without the transparent regions of the reflections. My plan is to have the background transparent and save all as a png to preserve the transparency on web. But it doesn't seem to happen in my latest attempts. Instead at the Intersect Shapes stage I get a tiny part of the background as my final image....
View 9 Replies
View Related
Feb 24, 2012
I have several pdf's that I have inserted into a dwg file and when I attempt to plot the file they print with transparency. I have adjusted the contrast, fade and monochrome settings to no avail (also assigned line weight is not set for transparency). Interestingly, the print preview window shows the attachments correctly, but the resulting pdf file when printed contains the attachments printed very faintly.
View 4 Replies
View Related
Dec 18, 2013
When I print to .pdf for A1 and plot, no worries, all lineweights print solid and perfectly. However, when I print to .pdf for A3 (scaling lineweights), whilst all the lineweights appear solid on the screen, when I plot the layers that are set to transparency are faded/rough/broken on paper.
Ticking the plot transparency box doesn't work and it happens to my printer at home and at work. I haven't used transparent layers before and have adopted this drawing created through someone else.
View 1 Replies
View Related
Apr 24, 2012
It appears transparency overide (by element or by category) won't be printed from any floor plan views in Revit 2013. Tried elevation/ section/ ceiling plans. all ok. it seems to me that is a bug.
The work around is to switch the view to wireframe.
View 9 Replies
View Related
Oct 27, 2011
I am unable to solve my problem with exporting an object (curve) with 2-colors fill (with transparency) to WMF, PNG or AI. I spent quite a long time already to figure out how to make transparent fill and when I finally succeeded, I cannot export that and work with it
I would like to transform the curve with transparent fill to just curves somehow... than it should be no problem with exporting. Or transform it to some other vector object - it does not matter - just to be able to use it and export it as vector object.
View 14 Replies
View Related
Sep 4, 2013
I am trying to plot somelthing with a transparent hatch. I set the hatch to transparent, shows up fine in model space. I go to plot (either to paper or pdf doesn't matter) in the plot setting I check "Plot Transparency" print preview shows everything fine. When I print I get a blank page.
View 5 Replies
View Related
Apr 24, 2013
I have a Hatch in my drawing with Pattern as Solid on the top of an image. I made it transparent and it looks really nice in my screen, but as soon as I print either in PDF or hard copy the transparency feature disappear. How is possible to print my Hatch -with Solid as Pattern- with the transparency active either in PDF and hard copy?
View 3 Replies
View Related
Jan 8, 2014
Trying to get blocks to plot transparent for only 1 viewport. Using viewport transparency works for all objects in applicable layer except blocks that have been created using "0" layer. I cannot use transparency by block since the blocks must show in other layouts without transparency. Also cannot re-create blocks using different layer since the source file is kept on network for all to use. Is there a way to plot blocks with the vp transparency of its current layer despite having created the block in another layer?
View 2 Replies
View Related
Apr 11, 2012
Dealing with large prints (72in x 36in @350dpi).
I've been commissioned to make a large print (12ft by 3ft) for a gallery. They want me to use a preferred printer who requires a final output resolution of 300-350dpi. My source file is an Illustrator file (CS5.1) containing MANY (100's) overlapping, transparent polygons). The printer initially told me that it was fine to supply the Illustrator file as two parts, 6ft x 3ft with everything as vectors. They just got back to me and rejected my files, now requesting full resolution TIFFs.
I have tried to flatten the transparency and output to TIFF, but either Illustrator hangs indefinitely halfway in the process or errors out, telling me that the combination of size and resolution is impossible to output. I've even tried to import to photoshop as smart object, etc. It appears that I'm running out of memory/cpu power/illustrator abilities even though I tried this on a quad cpu mac pro with 12GB of memory. At the moment, how to rasterize my vector art at anywhere near acceptable resolution. The image is very dense, and full of subtle changes in color and density due to the transparency. I need to preserve it as much as possible.
View 12 Replies
View Related
