When I apply simple flat transparency to a line, or a shape with an outline, it becomes translucent - as expected.
But when I apply a linear (or circular / elliptical / conical etc) transparency, only the fill is affected, and the line remains opaque
[Using Xara Designer Pro 6.1.2.13287]
I have tried to create a linear fill and it looks fine in Xara Designer, but after exporting the image as a jpeg, the gradation does not look smooth at all, it looks rather terrible. It does not look as smooth and as seemless as work I have seen which was created using software such as Photoshop. Am I doing something wrong?
View 8 Replies View RelatedAny good technique for applying gradual, linear perspective to textures used to fill shapes? An example will make my question much clearer (the attached drawing, both in JPG and .XAR).
The top shape is a carpet (or something) with a bitmap fill applied. I want to draw it curled, as in the bottom shape--the texture doesn't follow the contour of the object (as expected, since this isn't a 3D modelling program).
But is there some way to simulate the gradual rotation and foreshortening of a texture, to make folds and curls in fabric look more realistic?
I`m still using Xara X1... and am having two issues with the rectangular tool.
First, the rectangle draws on an angle, almost more like a diamond. I would like it to draw parallel to a horizon.
Second, the rectangle draw includes a linear fill. I would like to lose that parameter so that the rectangle can be a simple solid color that I can choose for myself.
Experiencing the Thin Lines mode printing with thin lines, not just affecting the view display?
View 9 Replies View RelatedI am using AutoCAD 2011. When I create a radius dimension on the inside of an arc, and I place the dimension beyond the center point of the arc, AutoCAD automatically draws an extension to the arc and points my radius dimension leader to the outside of this extension, rather than to the inside of the original arc.
I don't really like this. I prefer for my demension leader to point to the inside of the original arc. I can get exactly what I want by going into "Properties" for the radius dimension and turning the "Ext Line" property off.
Rather than having to do this every time, I'd like to create a dimension style that would give me this functionality all of the time. When I try to modify my dimension style, I see that there are just two parameters for Suppress Ext Line 1 and Suppress Ext Line 2. These seem to apply to both linear dimensions and radial dimensions. Is there anything I can do to suppress the extension line for radial dimensions only and not linear dimensions?
What's the difference between linear and bi-linear when using gradients? they seem to do the same thing to me (or I don't notice a difference)
View 2 Replies View RelatedI have no problem with transparency in Xtreme. I cannot seem to get it to translate to the internet. When I convert to PNG or Gif I get no transparency just a black rectangle.
View 9 Replies View RelatedI have an image that I need to export as a PNG with a transparent background.
In PGD 2013 it works fine - PNG is saved with a transparent background.
However, in PGD 9, it saves with a white (non-transparent) background.
There was a warning dialog about transparency pop up the first time I used PGD 9 to export the PNG, but I can't remember exactly what it said - something about transparency not supported for this type of file I think. I chose to ignore always and I can't find anywhere I can re-enable that option to see if it fixes things.
Import a photo image which is, for example, 100px high by 500px long. Now apply a simple fade transparency from the left edge to 100% transparent 100px in from the left edge (i.e. 400px of the image's length is now 'invisible').
Export this as a png and then import this png. It will still be 100 x 500 - can you tell Xara export the image truncated down just the 'visible' portion (i.e. 100 x 100)?
How to make a Contour object transparent? In below example is set a 1 step contour on the star, setting transparency the yellow is transparent but the grey not.
Contour_Transp.xar
I am aware that the star could be turned to editable shape, after clone and subtract so the transparency could be controlled on both shapes, but is there maybe some other way?
Also could be a way of course to set outline for the star and not contour, but I do not like as in that case the line half inside and half outside of the shape.
this is not rocket science either [nothing much I do is, is it ] and to some it will be well known
to others it might be instructive, and if nothing else it's a free 'complementary-complement' palette [ couldn't resist that ]
Reading the Help document it says that transparency in a document is rendered as a bitmap when printing because PostScript can't handle it. This is also the case when exporting to certain file formats.
Isn't there a better solution to this? There are some truly magnificent tools in Xara and I'm sure this means that the technology is there to render documents in a suitable form when printing and exporting.
I've just tried to get a simple logo using some flat transparency from Xara into a Microsoft product and the transparent parts have given me big headaches as I want a true vector solution. The only way I found to work was going via Adobe Illustrator. If Illustrator can do it then why can't Xara? Isn't there some way that Xara can analyse the parts with transparency and create new vector objects where possible?
How does everyone else handle this - do you all simply ignore the transparency tool and work without it?
I think this is related to Xara's inability to export alpha transparency properly. I've talked about this before, somewhere. Feel free to find the old post.
The thing is, without a decent export the feature is largely useless isn't it? .Xar is almost never the destination format.
I can get round the edges issue by printing to PDF instead of exporting, but then the bounds of the original bitmaps are visible. So neither solution is any good at all. Surely this is a massive problem?
Designer Pro 6: I've made round cornered pix for a catalog. I export as a PNG and the corners show black in the Web app I'm using, but they are transparent so it's OK. The last set of pix were done in Xara Xtreme 5, when I exported those as PNGs the corners were white, and the transparency was OK. My question is why the white or black corners, and is there something I can do that will control that? I used the same approach in Designer as in Xtreme 5.
View 5 Replies View Relatedis there maybe method to remove the transparency from an object with key shortcut?
So faster than selecting the object, clicking on Transparency tool and selecting in menu No transparency
how to invert the transparency tool on a circular shape, so that the edges are coloured and the centre is clear..?
View 3 Replies View RelatedThis is probably super simple. I do a lot of transparency stuff for the Web. My background color for the most part turns out to be black. I get my transparency but the program I'm using at the moment does a cleaner job with white. When it's black I see a little trash of black around the edge of the graphic. In the past I've come up with white quite by accident and it was clean as a whistle. I'm exporting as PNG, True Color + Alpha.
View 3 Replies View RelatedI have been meaning to cover this in one of the Workbooks and maybe some day I will remember.
I cloned the original photo, applied a Circular, Stained Glass transparency to the clone, moved the center of the transparency over the Datura blossoms, reduced the diameter, and reversed the settings.
In a few seconds I dramatically changed the photo.
I cloned the second photo of dramatic smoke from the recent wildfire, applied a vertical Linear, Stained Glass transparency to the clone, starting at the dark portion of the bottom of the cloud at 0% and ending just above the mountain tops at 100%.
Again, in less than the time it would take to open Photoshop, I had dramatically enhanced an already dramatic photo.
I used Graphics & Photos 2013, I update the software yesterday and if I save my job as PDF, the transparency done on a picture is inverted.Currently I removed the transparency but it is not the solution.Issue appear only when I create a PDF file. By creating a JPG file it works.
View 9 Replies View RelatedI am on Xara Photo & Graphic Designer 2013.I have a headshot that I can cut out of a larger photo using the freehand tool to trace the edges and then subtract the background that I want cropped out.
Now, I'm trying to figure out how I can apply some kind of transparency to the edges to soften them up a bit so they aren't so stark and will overlay nicely over my site background once the image is uploaded.
how to use PNG with transparency as "photo frame" for bitmap (photo) in Xara Xtreme Pro v5?
I'm try to design pages for photo book in Xtreme. I have set of files in PNG format as "frames" for photos. For example, I attach one (14_v.png) to this message. In another editor I can use them as "masks" for photos - in second attach (capture.png) you can see on left - usual photo, on right - photo with mask as photo frame. How I can make same effect in Xara Xtreme? I try to use different modes, substract/add shapes and other - but no luck.
I have photo & graphic designer 7 and want to know if its possible to remove the background from a file and save with transparency?
View 9 Replies View RelatedI'm a new user to Xara and to graphics program in general. I'm using Xara Photo & Graphic Designer 2013 and wish to convert a JPEG image (my company logo) so that it's a PNG file with full transparency. how (or if) I can do this.
View 9 Replies View RelatedI am having problems trying to produce an image with reflections. I have been doing it in the past with Xara4. My procedure is to take a number of images, create copies of them, flip them then add transparency once they are in place as refelctions. These are all placed onto a dark background; reflections are stretching beyond the background at this stage. And in the past if I select all, then Arrange>Combine Shapes>Intersect Shapes then I can have the whole image without the transparent regions of the reflections. My plan is to have the background transparent and save all as a png to preserve the transparency on web. But it doesn't seem to happen in my latest attempts. Instead at the Intersect Shapes stage I get a tiny part of the background as my final image....
View 9 Replies View RelatedI am getting white lines around anything with a drop shadow or outer glow after flattening the transparency in Illustrator CS6. The only thing I have found that remedies this is to rasterize all objects with effects. Is there another way with out having to rasterize the transparencies?
View 8 Replies View RelatedI've not used Xara in ages and can't remember how (or even if it's possible) to join two lines together. I was using the freehand tool with trace mode enabled to roughlty trace around an object in a jpeg image so I zoomed in on the object in the image I wanted to trace to get better precision. This meant the image was larger than my monitor and I had to trace a bit, press space bar, pan a bit, press space bar to get back to freehand tool, move over end of line to get little '+' sign to continue drawing existing line etc. But on one of the times I must have not got the '+' so was actually drawing a new line and not a continuation of the existing - hence need to get these 2 to join together.
View 4 Replies View RelatedThe very first thing any CAD program can do is be able to create a series of lines, connected end to end, on the fly, by starting each line snapped to the end of the last line.
I cannot see how to do this very basic procedure. Perhaps I'm missing something (). I can see how you can make 2 lines separately, then move one to snap to the other, but this seems awfully crude for a program like Xara.
I have an OS plan with the 100 metres squares marked.I want the ruler to coincide with the known 100m length.Then I can mark on layers various lines of say 7m or 25m long.How can I set the ruler and guides to enable me to draw lines such as this.
View 9 Replies View RelatedIs there an easy way that I am missing to create lines around a group? For example, when I want a rectangle with rounded corners on only one side, I usually just make 2 separate rectangles, one with rounded corners, one square, then group them together. However, when you put a line around it it also makes a lines where the two meet each other. I have always worked around it by adding another square rectangle between the 2 with no lines, to cover up the lines. Am I missing something obvious?
View 3 Replies View RelatedI have looked everywhere at all sorts of photoshop and illustrator tutorials (because I couldn't find a Xara one) to accomplish this effect. I am creating a website for my client Jim and would like to incorporate a similar image to what he's using on his book cover, but with some different colors as the background to his site.
You can see what I'm trying to do in his blog header background here: [URL]......
I've found that this is a stock photo used in a lot of places, but I'm not really interested in getting the original image - I have that, but as a Jpeg on a black background. I'd prefer to learn how to create a similar effect in Xara.
I have tried all sorts of things that are kind of close, but just not there yet. I've tried using a line with pen pressure with a glow shadow. I've tried lines with a stained glass color overlay. I've tried creating a number of different brushes with a few levels of color, some with Gaussian blur applied, etc. but I just can't get this effect down. It always looks pretty good when I'm done, but then I look at the inspirational original and I'm not even in the ballpark for the amount of shine, glow, impact, etc.
In the end, this may not even work for the site since will be putting it on a light colored background, but I still want to know how to create this, as I'm sure I'll be able to use the technique elsewhere.