Xara :: Add Drama To Photo Using Stained Glass Transparency?
Jul 24, 2011
I have been meaning to cover this in one of the Workbooks and maybe some day I will remember.
I cloned the original photo, applied a Circular, Stained Glass transparency to the clone, moved the center of the transparency over the Datura blossoms, reduced the diameter, and reversed the settings.
In a few seconds I dramatically changed the photo.
I cloned the second photo of dramatic smoke from the recent wildfire, applied a vertical Linear, Stained Glass transparency to the clone, starting at the dark portion of the bottom of the cloud at 0% and ending just above the mountain tops at 100%.
Again, in less than the time it would take to open Photoshop, I had dramatically enhanced an already dramatic photo.
how to make outline from photograph like in "make your own stained glass"? Because I'd really love to make some testings to a photo I have, but I have to take only the outlines.
I need to remove the background image which is visible through a stained glass window and replace it with a soft plain background (simulating an ambient light)
I don't really want to artificially recreate the lead grid design and wondered what's the best technique (masking or otherwise) to preserve this detail? I am considering clone stamp, intelligent fill, masking etc. but first I need to create a source of the grid to use.
I used Graphics & Photos 2013, I update the software yesterday and if I save my job as PDF, the transparency done on a picture is inverted.Currently I removed the transparency but it is not the solution.Issue appear only when I create a PDF file. By creating a JPG file it works.
how to use PNG with transparency as "photo frame" for bitmap (photo) in Xara Xtreme Pro v5?
I'm try to design pages for photo book in Xtreme. I have set of files in PNG format as "frames" for photos. For example, I attach one (14_v.png) to this message. In another editor I can use them as "masks" for photos - in second attach (capture.png) you can see on left - usual photo, on right - photo with mask as photo frame. How I can make same effect in Xara Xtreme? I try to use different modes, substract/add shapes and other - but no luck.
I've found a hotfix for 2012 that I've used to solve some issues with tranparent parts in shaded views and that leads to this question.
In an IDW , "non shaded", "hidden lines removed", view are there any tricks for being able to see parts behind a transparent part?
I know I can change the view to display hidden lines and delete what I don't want. This works ok for a small assembly, but for a larger assembly, is not feasible or at least very tedious.
Can you make a glass, which is transparency also in elevation views? In 3D views it is transparency and you can adjust it too, but not in elevation view? Is it so?
You can only hide it totally or let it be non transparency?
I am trying to create an image of "Frosted Glass" I want to be able to save this and later import it to put on top of other backgrounds and layers so that you would see the back layer as looking through frosted glass.
I am new to gimp but have been looking around at different walkthroughs. I must be missing somthing though because I am not getting what I would expect.
How I am trying to do this is I created 3 layers a light blue, white and alpha channel(transparency layer).
I adjusted the opacity down of the white and blue layers and then merged all 3 and again tried to adjust the opacity to acheive the effect. However I am a million miles off the mark.
I've just landed some contract work where I will design glass forms/containers and render realistically. Also, I need to retain transparency so I change backgrounds.
I'm more adept with Photoshop than Illustrator, but would like input on who likes which program for this task, why, and where I can find excellent tutorials before I start spending my tutorials dollars.
I would like the two pictures to blend in the middle from left to right. The picture on the left will be sharpe on the left side but fade/transparent by the time it reaches the middle. The picture on the right will be sharpe on the right side but fade/transparent in the middle.
I would think I need a gradient transparency (you always have to use a color)
I see pictures like this all the time, but can not seem to find the correct feature or combinations of features.
We would like to make the transparency of glass-materials visible in views and section-views by using the "realistic style". During a 3d-view our glass-material looks like transparent. Isn't it possible for REVIT to display the transparency of materials in views ?
The workaround to hide "glass" by using "overriding visibility" is not possible for us because some of our families and project families are using glass-materials inside (Showcases f.e.).
Software (German) : RAC 2012+2013 Inventor Pro 2013 AcadM 2012 MaxDesign 2013 Sketchup 8 Pro
I have no problem with transparency in Xtreme. I cannot seem to get it to translate to the internet. When I convert to PNG or Gif I get no transparency just a black rectangle.
I have an image that I need to export as a PNG with a transparent background.
In PGD 2013 it works fine - PNG is saved with a transparent background.
However, in PGD 9, it saves with a white (non-transparent) background.
There was a warning dialog about transparency pop up the first time I used PGD 9 to export the PNG, but I can't remember exactly what it said - something about transparency not supported for this type of file I think. I chose to ignore always and I can't find anywhere I can re-enable that option to see if it fixes things.
Import a photo image which is, for example, 100px high by 500px long. Now apply a simple fade transparency from the left edge to 100% transparent 100px in from the left edge (i.e. 400px of the image's length is now 'invisible').
Export this as a png and then import this png. It will still be 100 x 500 - can you tell Xara export the image truncated down just the 'visible' portion (i.e. 100 x 100)?
How to make a Contour object transparent? In below example is set a 1 step contour on the star, setting transparency the yellow is transparent but the grey not.
Contour_Transp.xar
I am aware that the star could be turned to editable shape, after clone and subtract so the transparency could be controlled on both shapes, but is there maybe some other way?
Also could be a way of course to set outline for the star and not contour, but I do not like as in that case the line half inside and half outside of the shape.
Reading the Help document it says that transparency in a document is rendered as a bitmap when printing because PostScript can't handle it. This is also the case when exporting to certain file formats.
Isn't there a better solution to this? There are some truly magnificent tools in Xara and I'm sure this means that the technology is there to render documents in a suitable form when printing and exporting.
I've just tried to get a simple logo using some flat transparency from Xara into a Microsoft product and the transparent parts have given me big headaches as I want a true vector solution. The only way I found to work was going via Adobe Illustrator. If Illustrator can do it then why can't Xara? Isn't there some way that Xara can analyse the parts with transparency and create new vector objects where possible?
How does everyone else handle this - do you all simply ignore the transparency tool and work without it?
I think this is related to Xara's inability to export alpha transparency properly. I've talked about this before, somewhere. Feel free to find the old post.
The thing is, without a decent export the feature is largely useless isn't it? .Xar is almost never the destination format.
I can get round the edges issue by printing to PDF instead of exporting, but then the bounds of the original bitmaps are visible. So neither solution is any good at all. Surely this is a massive problem?
Designer Pro 6: I've made round cornered pix for a catalog. I export as a PNG and the corners show black in the Web app I'm using, but they are transparent so it's OK. The last set of pix were done in Xara Xtreme 5, when I exported those as PNGs the corners were white, and the transparency was OK. My question is why the white or black corners, and is there something I can do that will control that? I used the same approach in Designer as in Xtreme 5.
Putting aside the fact that you really can't see stars at sunset, and that if Polaris ever shows up near a setting sun, it's the End Of The World -- it's equally easy to add the stars to a nighttime photo..Next. Am trying to build a collection of photo-editing tips on the Xara-Users forum -- [removed link -link broken and or requires membership to view]
Xara's a LOT easier to use than Photoshop. But it is different. I know Xara's really for vector artwork, but when you end up using it more and more for photo editing, it's useful to have a bunch of techniques in one place.
This is probably super simple. I do a lot of transparency stuff for the Web. My background color for the most part turns out to be black. I get my transparency but the program I'm using at the moment does a cleaner job with white. When it's black I see a little trash of black around the edge of the graphic. In the past I've come up with white quite by accident and it was clean as a whistle. I'm exporting as PNG, True Color + Alpha.
I am on Xara Photo & Graphic Designer 2013.I have a headshot that I can cut out of a larger photo using the freehand tool to trace the edges and then subtract the background that I want cropped out.
Now, I'm trying to figure out how I can apply some kind of transparency to the edges to soften them up a bit so they aren't so stark and will overlay nicely over my site background once the image is uploaded.
Im trying to cut a photo of a tree and place it over a photo of a house so the house can be seen through every twig and leaf, at the moment I can only move the tree with the existing back ground. I have PHOTO & GRAPHIC DESIGNER 7.
I have a hand drawn image that got wet and bled the works.. This is part of a these peoples collection drawn over 60 years ago. I'm being asked to clean it up but to retain as much of the original lines as possible. (They would prefer if I did not clone the boxes etc. in an attempt to keep the integrity of the original drawing)
I've tried everything I know from background eraser, channels, lab, selections, blends ...only thing that seems to work well is the ol'trusted eraser but it will take forever...
I'm a new user to Xara and to graphics program in general. I'm using Xara Photo & Graphic Designer 2013 and wish to convert a JPEG image (my company logo) so that it's a PNG file with full transparency. how (or if) I can do this.
