AutoCAD Inventor :: Glass Transparency In IDW
Sep 24, 2013
I've found a hotfix for 2012 that I've used to solve some issues with tranparent parts in shaded views and that leads to this question.
In an IDW , "non shaded", "hidden lines removed", view are there any tricks for being able to see parts behind a transparent part?
I know I can change the view to display hidden lines and delete what I don't want. This works ok for a small assembly, but for a larger assembly, is not feasible or at least very tedious.
View 2 Replies
ADVERTISEMENT
Mar 24, 2011
Can you make a glass, which is transparency also in elevation views? In 3D views it is transparency and you can adjust it too, but not in elevation view? Is it so?
You can only hide it totally or let it be non transparency?
See illustration what I mean.
View 3 Replies
View Related
Jul 24, 2011
I have been meaning to cover this in one of the Workbooks and maybe some day I will remember.
I cloned the original photo, applied a Circular, Stained Glass transparency to the clone, moved the center of the transparency over the Datura blossoms, reduced the diameter, and reversed the settings.
In a few seconds I dramatically changed the photo.
I cloned the second photo of dramatic smoke from the recent wildfire, applied a vertical Linear, Stained Glass transparency to the clone, starting at the dark portion of the bottom of the cloud at 0% and ending just above the mountain tops at 100%.
Again, in less than the time it would take to open Photoshop, I had dramatically enhanced an already dramatic photo.
View 6 Replies
View Related
Jun 29, 2012
I am trying to create an image of "Frosted Glass" I want to be able to save this and later import it to put on top of other backgrounds and layers so that you would see the back layer as looking through frosted glass.
I am new to gimp but have been looking around at different walkthroughs. I must be missing somthing though because I am not getting what I would expect.
How I am trying to do this is I created 3 layers a light blue, white and alpha channel(transparency layer).
I adjusted the opacity down of the white and blue layers and then merged all 3 and again tried to adjust the opacity to acheive the effect. However I am a million miles off the mark.
View 7 Replies
View Related
Jul 7, 2013
I've just landed some contract work where I will design glass forms/containers and render realistically. Also, I need to retain transparency so I change backgrounds.
I'm more adept with Photoshop than Illustrator, but would like input on who likes which program for this task, why, and where I can find excellent tutorials before I start spending my tutorials dollars.
View 3 Replies
View Related
Jan 12, 2013
We would like to make the transparency of glass-materials visible in views and section-views by using the "realistic style". During a 3d-view our glass-material looks like transparent. Isn't it possible for REVIT to display the transparency of materials in views ?
The workaround to hide "glass" by using "overriding visibility" is not possible for us because some of our families and project families are using glass-materials inside (Showcases f.e.).
Software (German) :
RAC 2012+2013
Inventor Pro 2013
AcadM 2012
MaxDesign 2013
Sketchup 8 Pro
View 4 Replies
View Related
Mar 30, 2011
Any way to put a detailed patten into my glass window.
I have created glass with the slate material editor, used specular 100, glossiness 80 in the Blinn dropdown. Ued mental ray. Looks good, very glassy. Now I want to put a pattern on the glass, like a silouette, only that it is also translucent, part of the glass, as though it was an "etched glass" pattern on the glass. Do i make the pattern into some kind of "mask"? and lay it over existing glass?
View 3 Replies
View Related
Aug 24, 2012
I'm having trouble finding or creating an 'appearance' that actually looks like glass. Each of the appearances in the Inventor library and Autodesk libraries are milky and not very transparent at all. I'd like to find or create a material that is almost 100% clear, but reflects the environment.
The transparency slider scales from 0-100% but the results are more like 0-75%.Inventor Studio looks just as bad.I've got to believe that it's not impossible to do without Showcase or 3DS Max.
View 2 Replies
View Related
Jan 18, 2013
Let me preface this by saying that we work mostly in the metal fabrication industry dealing with the elastic deformation of plastic materials that are isotropic so this question is a bit above my pay grade here.
Is it possible to simulate the stresses in a piece of glass in a simple beam scenario in Inventor (1/2" x 48" x 130" Tempered Glass)? I have a client that wants me to design a conference room table for him but I am highly uneducated about glass.
Is it possible to simulate? If not, is it possible to "fake" it and get semi-reliable results? We're at the conceptual stage here and we're curious which of our designs have a greater possibility of surviving the design validation process (which will include a glass expert at some point).
View 2 Replies
View Related
May 22, 2013
How can i have extrusion 3 with the Glass appearance or clear so as to look like Glass ?
View 2 Replies
View Related
Nov 3, 2013
I have tried all possible “clear” appearances but my glass is not transparent as used to be in previous release. As you can see from video the left glass is clean and it was migrated from previous release untouched. It does not have any material assigned.I was trying to assign the Glass Material to the right one but cannot make it clear nevertheless property claims it 100 percent transparent.
How to make my glass transparent and clear as used to be in 2012?
[URL]....
View 4 Replies
View Related
Dec 3, 2013
I have a bent glass file that i am trying to flatten in Inventor Pro 2014. It is not allowing me to flatten it. How to flatten this file or if it is even possible with Inventor?
View 3 Replies
View Related
Nov 28, 2013
In 2013, glass density is 2.18 g/cm^3. But in older versions, we had that as 2.56 g/cm^3 for many years. Google results range between 2.5 to 2.6 g/cm^3. Why 2013 has much lower value?
View 2 Replies
View Related
Oct 31, 2011
I need to make a material in my library that resembles acid etched glass. It basically looks like glass that has been sandblasted. I sell a lot of it and need to show it in my models.
View 3 Replies
View Related
Jul 26, 2012
I am trying to locate the image over the glass surface.
But once picture is located over the glass the Decal command makes my picture transparent.
Is there any way to make it not transparent?
So far it works only with not transparent substrate.
[URL]
View 7 Replies
View Related
Aug 19, 2013
I have a part that was sent to me from a vendor. It was a large 80MB part so I put it in an assembly file and shrinkwrapped it to reduce the size of it. Now it is transparent and I can not figure out how to turn it off.
View 8 Replies
View Related
Sep 8, 2011
How can I change transparency of a part within itself or within an assembly? (I.E. leave its original color as is, but changing/"tweaking" its transparency).
View 9 Replies
View Related
May 16, 2013
Is there any way to turn off the menu transparency of the right click menu? I find it highly annoying in drawings seeing hazy black lines behind text I am readingIs there any way to get inventor to work properly with windows dpi scaling? It is quite useful to have windows display text a skosh larger than normal but inventor is completely unusable with that option enabled. text on toolbars disappears and the zoom/pan/orbit goes from fluid to jumpy and useless.
View 2 Replies
View Related
Feb 16, 2012
I am creating a multibody part. I have revolded a surface from a sketch through other bodies and used those bodies to trim the surface. I then thicken the surface to create a solid.
The solid is transparent and no amount of property adjusting or anything else will make it opaque like the rest of the solids.
in the picture the open scalloped portion contains two bodies.
View 2 Replies
View Related
Sep 10, 2006
I have two pictures.
I would like the two pictures to blend in the middle from left to right.
The picture on the left will be sharpe on the left side but fade/transparent by the time it reaches the middle.
The picture on the right will be sharpe on the right side but fade/transparent in the middle.
I would think I need a gradient transparency (you always have to use a color)
I see pictures like this all the time, but can not seem to find the correct feature or combinations of features.
View 1 Replies
View Related
Apr 19, 2012
I need to draw a 3D of a car's glass in AutoCAD 2011. I have attached pic of glasses.
View 2 Replies
View Related
Dec 11, 2012
when I was test-rendering a scene where you are supposed to be able to look into nearby rooms through glass walls. But the glass reflected the surroundings like å mirror. In some tries i could barely see some furniture in the other room, so the transparency isn't completely gone.
I use a solid glass material, at first i thought the material's reflection value was too high, but it was set on five, I tried to reduce it to 1, but the rendering came out just the same.
I have tried with different lighting options, but again... the same miserable result.
View 4 Replies
View Related
Nov 27, 2013
I am currently doing a 3d model using version 2011 , everything is all right but one thing. I need my windows to show reflection of either clouds or trees after rendering , so how do i add such things to my windows and doors.
View 2 Replies
View Related
Sep 20, 2012
How to render clear glass and wood in autocad 2011?
View 1 Replies
View Related
Jul 24, 2011
How to make aluminum frame glass door. How would you create the glass panel wall?
View 4 Replies
View Related
Sep 19, 2011
We currently have 4 licences for AutoCAD 2012 and once it was installed it takes a really long time to plot and the hour glass just keeps flipping. What can i do to resolve this problem?
View 3 Replies
View Related
Nov 18, 2012
I am having trouble making the cladding on this building look good enough for a presentation! I want to put like glass facade on curved areas.
Cad1.jpg
View 3 Replies
View Related
Apr 7, 2011
Am using the "pre-defined" walls in Autocad Architecture 2010, with equally pre-defined windows.
I have found where to change ("Edit window style") virtually every parameter of the window, e.g. frame and sash depths.
However - I can not find a way to change the position of the the glass in the window relative to the interior/exterior of the wall. (see attached image for clarification)
I hope I am making myself understood - the glass could for example (assuming the depth of the frame is the same as that of the wall it sits in) be located 40mm from the exterior of the wall - or 10mm.
View 2 Replies
View Related
Aug 6, 2013
I have a vertical stripe pattern and I have to put it on each glass drawing that I have (8 total). I've four countersunk holes on each unit so I need to trim the glass perimeter and larger hole from the stripe pattern (which is 1/4 inch solid hatch fill with 1/2 inch clear space). How can I make this faster?
1.jpg
2.jpg
View 8 Replies
View Related
May 11, 2011
I have this part that need to be extrude along a complex path. However, every time i try this the bottom of the part does not stay parallel the the x-axis.
Here is the drawing:
Curved Stair.dwg
View 1 Replies
View Related
Feb 15, 2003
I have came to the step where you should add a layer mask, but im not understanding why should i need the layer i have try to add it but whats next i never get the same look as his ball : (.
One more thing when i try to flip a layer vertically the hole thing change, not only the layer : (. How should i do this, how should i flip it.
View 3 Replies
View Related
