AutoCad 3D :: Creating Cladding - Put Glass Like Facade On Curved Areas
Nov 18, 2012I am having trouble making the cladding on this building look good enough for a presentation! I want to put like glass facade on curved areas.
Cad1.jpg
ADVERTISEMENT
3ds Max :: Creating Etched Glass Pattern On Existing Glass Window
Mar 30, 2011Any way to put a detailed patten into my glass window.
I have created glass with the slate material editor, used specular 100, glossiness 80 in the Blinn dropdown. Ued mental ray. Looks good, very glassy. Now I want to put a pattern on the glass, like a silouette, only that it is also translucent, part of the glass, as though it was an "etched glass" pattern on the glass. Do i make the pattern into some kind of "mask"? and lay it over existing glass?
Revit :: Curved Glass Balustrade
Oct 7, 2011I am trying to create a staircase balustrade in glass but which needs to follow the curved edge of the stair. The stair has 3 straight flights with two sections of curved winders.
I've tried using a glass balustrade family but this doesn't seem to work as the size of the panels prevent it following the curve. A similar problem exists at the edge of the floor where the balustrade needs to follow the curved edge of the floor. The handrail element of the balustrade works fine.
Photoshop :: Retouch 100 Year Old Photo In Curved Glass?
Jun 20, 2013How do you retouch a 100 year old photo in å curved glass?
View 4 Replies View RelatedRevit :: Align Grids And Mullions In Curtain System Of Curved Glass Roof?
Feb 15, 2007how i can align the grids and mullions in a curtain system of a curved glass roof?
View 3 Replies View RelatedAutoCAD Architecture :: Creating Schedule To Pick Up Room Areas
Oct 7, 2012I am creating a schedule to pick up the room areas and additional information to do with artificial lighting. That bit is the easy bit.
What I am trying to do is put a column in the schedule that shows how many light points are within that particular space. I have looked into ticking the quantity box, but that picks up just the spaces. If there was a way that this could be used to pick up the blocks in a particular space, and not the spaces that would be the simplest way to solve this (I think anyway).
Just to let you know, I am using Dynamic Blocks for the light fittings. As I can have all the different types within the one block. I have heard that I can do this using the MultiView blocks (I haven't explored this yet), but the amount of blocks that I need is going to be increased (from what I know about MultiView blocks). The simpler this is, the better I believe.
I have tried using Count under the Automaitc Property, but when used, adds the blocks as an extra row, not into the desired column. I may have to add something to the block to get it to do what I want it to do, but don't know how to do this. At the moment, I am putting this information manually into the space properties.
The next part to my question, and again, I maybe asking a bit too much here, but I want to take two totals from two different columns to create an average. If I could do this in the one table, fantastic! If I have to create a second schedule to pick this up, that is ok I suppose, but I would then do the math for it manually and just write it in if that was the case.
I'm using ACA 13
AutoCAD Inventor :: Creating Hole On Curved Surface?
Oct 29, 2012I am trying to create a simple hole with threads for a set screw on a hub. I cannot figure out how to select the tangent plane I need to create the sketch. I'm using Inventor 2013 and have attached the file below.
View 9 Replies View RelatedAutoCAD Inventor :: Creating Axis Along A Curved Pipe?
Sep 20, 2011I am trying to constrin a washer to a curved pipe. How do I create an axis along the curved pipe so the washer can constrain and move along the cruved axis?
View 4 Replies View RelatedPhotoshop :: Creating A Glass Of Water
Aug 9, 2003drawing a glass of water. I want to make a graphic with a cylinder, add water to it, then make it appear to have a glassy look. can anyone help me out? would it be best for PhotoShop or Paint shop?
View 3 Replies View RelatedAutoCAD Architecture :: Creating Elevations / Sections From Curved Solids
Nov 27, 2013I designed an upholstered furniture with curved surfaces. When I generate sections or elevation I'll see the invisible edges on curved surfaces! Is there a way to get the same result as the object viewer hidden line (or shaded with edges)?
2nd question. is there a way to control how many steps the surfaces are tessellated? The outline is not very smooth!
Top View
Elevation (too many edges visible)
Result of the object viewer.
Photoshop :: Creating Magnifying Glass Graphic
Apr 14, 2012How I could create a magnifying glass graphic using Adobe Photoshop? I did do a search but it mostly came up with instructions or info on how to create one that'll also actually have a "magnifying" or "glassy" look to it.
While just I want to create a simple one, just containing a circle and an handle attached to it. Kinda like the following:
[URL].........
And in case you're wondering why I don't use the above, I'd like to create one with my own colors.
Photoshop :: Creating A Glass Look A Like Flat Shape...
May 28, 2004i've scannd somthing, and i want it to look like its behind a glass window.. the object is pressed to the scanner so i got the behind somthing feeling.. now how do i make it look more like a glass window? a glass wall..?
View 9 Replies View RelatedPhotoshop :: Creating Realistic Glass Objects
Sep 5, 2007I'm trying to create some realistic glass tube-like objects, but I can't seem to get it right. but the main problem i've run into is that if the background is clouds,or something that doesn't have a lot of definition and color variation, it really looks nothing like glass.
View 1 Replies View RelatedRevit :: Create A Custom Cladding Panel In It
Dec 12, 2010Is it possible to create a custom Cladding Panel in Revit Architecture, whereby the panel shows elements of both solid extrusion and void extrusions?
View 4 Replies View RelatedAutoCAD Inventor :: Creating Linear Section View From Curved Line?
Jul 23, 2012Creating a linear section view from a curved line
View 5 Replies View RelatedPhotoshop :: Creating Glass Button Look Out Of Existing Image?
Jul 7, 2013I have an image that is going to serve as an online ad. I would like to have it look like a glass button like so many online ads do these days. However, most tutorials out there give instructions for how to do it with only text over the button. How would I do it if it's got three different sections to it? A photo on the top half and two colors on the left and right on the bottom?
View 2 Replies View RelatedIllustrator :: How To Clean Up Scanned Sketch And Creating Fill Areas
Apr 18, 2013I am having trouble when tracing a sketch to convert it to vector. I have tried scanning it into photoshop first then exporting it to illustrator, and also just scanning in as a jpeg and opening it in illustrator.
The trouble I am experiencing is that the lines are not clean, but appearing very grainy. When i choose Fills I get the best result, but with Strokes i get 2 thin lines and obviouly no fill.
Either way I can make the color of the lines all the same, but am unable to create objects within the lines to fill with color, such as face, sunglasses, etc. I can do it with live paint but I know there are other ways to color in files in AI.
Here are the original, the fill, and the stroke result outcomes
Here are the files on dropbox [URL] .....
AutoCad :: Measure Areas Of Many Rooms And Arrange Areas In Table
Aug 15, 2011I have a drawing (autocad 2011) ,which i have to measure the areas of the many rooms and i arrange these areas in a table! is there any fast way to do so? avoiding the boaring typical area measurements room by room?
View 9 Replies View RelatedPhotoshop :: Creating A Curved Shape
Jun 30, 2005to create a curved shape is. So say you have a rectangular shape running down the left side of the page, but the right side of the shape is curved.
View 6 Replies View RelatedPhotoshop :: Creating Curved Text
Feb 24, 2003I would like to save some text in an arc as a bitmap to place in a Pagemaker document.
View 7 Replies View RelatedPhotoshop :: Creating Curved Lines?
May 22, 2003I have been using Photoshop since 5.0, in Photoshop the line tool is used for creating lines, the pen tool is used for creating curved shapes, so what is used for creating curved lines?
View 2 Replies View RelatedPhotoshop :: Creating Curved Lines Like In
Mar 4, 2008I'm working on a map and need to have curved lines ending in arrows. When I use the line tool it only makes straight lines. When I use the pen tool it only makes solid shapes. I wish to use a tool that acts like the pen tool in illustrator - will give me a line that I am able to curve as I choose, at the thickness I choose, in the color I choose. I've spent an hour trying different tools to achieve this and no luck. A coworker suggested creating the lines in illustrator then importing them, however that seems counterproductive and I can't believe Photoshop can't do something as simple as making a curved line!
View 4 Replies View RelatedCorelDRAW X5 :: Creating Label For Cup Or Curved Surface?
Dec 3, 2010I need to make a label for a cup but haven't been able to. how to do it (theoretically), I don't how how / if I can use CorelDRAW to do it. I have included the video I used to find out how to do but it uses a different program that uses a "mould tool". Is there a tool that does the same thing on CorelDRAW?
[URL]
3ds Max Modeling :: Simple Way Of Creating Curved Surface?
Apr 1, 2011I've been working on creating a sword in 3D Max for the last couple of days and have run across a problem. At the base of the blade, it goes up straight for about an inch and then tapers out and up another half inch in a curve.From there, the blade tapers/curves back in, then out once more to create a thicker end of the blade, width wise. I need to know a simple way of doing those curves. A friend of mine suggested using quick loops, then individually scaling them to get the curving effect. That just seemed like it took too much time to me, and I thought there must be a simpler way. I tried adding a taper modifier to the selected area, but that didn't really seem to do much, except give the opposite effect that I wanted.
View 4 Replies View RelatedGIMP :: Curved Edges When Creating Puzzle From Image
Apr 15, 2011I am trying to create a puzzle from an image but I am having some trouble with the edges of each puzzle piece. Basically in short what I am doing is this.
1) I load my image in gimp (image layer).
2) Create new white layer (puzzle layer).
3) Use Filters -> Render -> Pattern -> Jigsaw...
4) From the Jigsaw windows I select; Bevel width; 0, Highlight; 0, Jigsaw style; curved.
5) I then select the white area from the puzzle later, copy this area from the image layer, and paste this on a new layer (piece layer).
6) I duplicate the piece layer (duplicate layer).
7) Paint the piece in white in duplicate layer.
8) In duplicate later I select Filters -> Blur -> Gaussian Blur
9) In piece layer I select Filters -> Map -> Bump Map
10) I select the duplicate layer as layer.
My problem is that the edges look really bad. Is there any way how I can make them look better? That is, not so much crippled?My aim is to have each puzzle piece in a different layer since I have to save them in different files. I checked several tutorials on how to create puzzles but all give me similar results.
AutoCAD Civil 3D :: How To Rotate Point Labels On An Elevation (facade) Drawing
Dec 7, 2012Is it possible to rotate the point labels when working with point files from an elevation Survey in Ciivil 3D? When activating the labels visibility they are horizontal, but when I rotate the drawing to a side view I am can´t see them.
So far I was working with Autocad (importing a dxf). Is there a way to rotate at the same time all the points labels, wich in this case are just text items?
Revit :: Why Create Area Schedule Of Areas As Opposed To Using Room Areas
Sep 22, 2011What is the difference between rooms and areas? Why create an area schedule off 'areas' as opposed to using 'room' areas? Can you create a schedule off room areas?
View 2 Replies View RelatedRevit :: How To Design A Form Of Facade
Nov 2, 2011I would like to know what is the best way to design a form of facade, similliar to the picture of the building I have uploaded and mentioned in the title of this post? Take note that I still am relatively unexperienced with the program
View 3 Replies View RelatedAutoCAD Civil 3D :: Curved Label For Curved Feature Line?
Mar 8, 2013How to create a flow arrow label for a feature line that parallels the curve?
I've a vague notion that this could be done with a dynamic block and a few fancy expressions. I'm comfortable with expressions, but I've never used dynamic blocks at all, so I wouldn't know where to start.
To be clear, I know curved text is possible, but I'm looking for a curved line (ie an arc) that would look 'parallel' to the arc of the feature line (ie have the same centre point). This would have to be dynamic to allow for different radii and for flipping to the left and right side of the feature line.
AutoCAD Inventor :: Extrude To Curved But Without Curved Resulting Surface?
Aug 6, 2012I want to extrude a big number of pillars to a rather complicated surface and that works out fine. But each end of the pillars warps around the surface and I want them just to go up to it and stop with a resulting horizontal face.
View 1 Replies View RelatedGIMP :: Aerial Photo Of Island - Make Water Areas Black And Land Areas White
Jan 29, 2013In the image below I have an aerial photo of an Island. I need to make it so as water areas are black and land areas are white (not greyscale) almost like a silhouette. My first plan was to draw round the island with a black paint brush and then use the "bucket fill" with a suitable threshold to fill all of the areas up to the black outline with black, however this doesn't work as the bucket fill either breaks through the black line or when I reduce the threshold, doesn't color the water areas solidly.
View 3 Replies View Related