I would like to know what is the best way to design a form of facade, similliar to the picture of the building I have uploaded and mentioned in the title of this post? Take note that I still am relatively unexperienced with the program
I have created a double skin curtain panel family but it cannot be applied to non-rectangular panels. How to create the non-rectangular double skin facade?
In search of a program that would allow me to design and print paper forms. I've been asking around at various forums within Adobe and elsewhere, and have been able to eliminate softwares, but have yet to find any that I could actually utilize.
I am trying to create a void form in revit architecture, i am following the quick start tutorial from the design academy website and when I try to make a void form i get an error, pics to explain:
I'm trying to figure out a small problem I have with creating a Blob-like form. I've created a mass by creating a form out of six (two per level) reference lines. The Form comes out nice, but whenever I divide the form, the two created surfaces don't align with each other. Therefore, when I create curtain walls or patterns on this form, they don't match up either.
I have attached two images and a Conceptual massing file with the mass inside.
One of the features I was really looking forward to in CS6 was creating fillable forms with ONE application. I created a form following the step by step instructions in classroom in a book for CS6. When I opened the exported form in Reader X, I get a "This operation is not permitted" error. I opened the completed "end" document in the lesson to make sure I didn't commit an error, and I got the same message when exporting. I have looked for places in menus to modify security restrictions and I can't find any. I installed the updates and that didn't solve the issue.
I saw one solution posted which is to open the document in Acrobat, then do a "save as" option. Is there anything we can do that doesn't involve buying additional software? If this is not the case, then Adobe seriously needs to change its training and advertising about this functionality.
I've been looking for a site / tutorial that outlines a detailed workflow for exporting a model from Revit and into 3ds Max for rendering and animation.
I'm particularly interested in how best to set a model up in revit to make this process less painful - particularly around material assignments, mapping etc. so that I can switch from the multi-material (using material IDs) setup that comes into Max over to the Architectural & Design materials.
Is it my inexperience with the product or is Revit Architecture far less competent for designing residential architecture than it is for commercial? I'm trying to design a large home and face workaround after workaround - many of which defeat the BIM materials inventory database I'd like to develop for quoteing the job. I understand that a Wood Framing Extension is available, but I'm still a student learning the software and the application is a subscription item and a high cost.
The problem that I am facing at the moment is the lines are showing through my design. I have tried making the lines invisible but I cant because if I do than the place where I need the lines to show will not.
I have four floor plans of varying differences on the same level that have been set up in different views, and organized by 'Design Options'. It would be very beneficial to be able to overlay these plans (eg. to see the differences, to make relative manipulations) as one can with the 'Underlay' feature can with different levels.
I have thought about placing the views on the same sheet and then activating the view I want to revise, but there is transparency complications . Suggest an alternative for a Design Option Underlay ability?
/still holding out for the ability to organize the listing of 'Design Options'
I have a tenant improvement project: two side by side medical offices. The owners want to run a joined practice and are building it together, so I'm preparing one set of construction drawings. However for a permit drawings I have to prepare 2 sets of drawings with each office separately-what's the best way of doing it? Also how should I handle sheets?-should I create 2 series: permit and CD? I'm not sure how to do it.
Is there a way to organize Design Options (alpha numeric) once they have been created.
I work for a large home builder and we will have multiple elevations for each floor plan. The elevations are usually labeled A, B, C, D etc. If an elevation changes labels, say elevation D becomes elevation B, the order will now be A, D, C, B; they cant be reordered into alphabetical order. Which can become confusing. Make sense? Attached is an example of a basic Design Option from one of my houses. In a typical house we can have 50-60 design options, that can change names over years, and they need to remain in an easily read and sourced order.
Is it possible to rotate the point labels when working with point files from an elevation Survey in Ciivil 3D? When activating the labels visibility they are horizontal, but when I rotate the drawing to a side view I am can´t see them.
So far I was working with Autocad (importing a dxf). Is there a way to rotate at the same time all the points labels, wich in this case are just text items?
I am using Revit Architecture 2013 and I have a few different design options for the mian level of a house I am working on. I have the North wall of the house in a design option for the living room at the moment. But I have decided I no longer want that wall in the my living room option, I would like to move it to my kitchen design option so I am able to move a window that is located on that wall. I cannot seem to find a way to move a wall from one design option to another or have it in both if it is already part of a design option. How I can get this wall and the windows located on it into my kitchen design layout without having things being double counted in the schedules?
I have several architectural models linked into my central file on a project. For this project, there is an addition to the building that is a design option. When I look at the linked files, though, I can only see the existing construction. I also know how to copy/monitor levels, but I want to view the architect's room elevations in my model. How can I copy the architect's design options and specific views into my model?
I have run in to problem with Design Option. When I try to change the primary option I get a error message, see picture below or picture attached.It says "Elements can't be duplicated".
I am currently trying to export models into dwfx format for design review and freewheel. However, I have a problem opening the dwfx files that are 16,000 kb in size or higher. How to make the file smaller in Revit.
I am doing several houses with design options, but we need all the information for the main model will be unique for all the options in every model in order to keep only one file and manage the information just like and xref.
I am trying to design the border mullion of the curtain wall, in a way that its centerline aligns to the border gridline.
For default the border mullion aligns the external face of it to the gridline, but I would like it to act as the internal mulluon - aligning with the centerline.
I'm trying to export Revit into Navisworks Simulate but there's no Navisworks tool in External tools. I did a full install of the Design Suite and checked Control Panel/ Programs/ Programs and Features for " autodesk navisworks simulate 2013 exporter plugins" but they're not installed. Are the plugins included in the Suite or do I download them from Autodesk?
1. When I link A revit model (having different worksets) into B revit model, We can control the worksets visibility at the time of linking. We can select any workset to be switched off and it will not be visibility in any view. Can we controll it after linking and on the basis of views, i.e. Can we switch off any single worksets of a link file in a particular view. My understanding is that We can't control worksets of a link file in our main revit model.
2. If A.rvt contains deisgn options. can we link those design options to design options in B.rvt, Can we set the visibility of a view in B.rvt to see desired design option from A.rvt. My understanding is that revit link does not contains design options information.
3. Similar rules applies with Phases. We can't link phases from A.rvt with phases in B.rvt, Also can not controll the visibility of phases of a linked revit model.Seeks experts comments to confirm my belief. What are the nearest possible work around for these issues.
We have a "core & shell" model linked into a "fit-out" model. We are working with design options in the "fit-out" model with different design options.
1. In a 3D axo view and working in the main model, we can see the linked "core & shell" file.
2. In the same 3D axo view and working in the primary design option, we can see the linked "core & shell" file.
3. In the same 3D axo view and working in any of the other design option, we CANNOT see the linked "core & shell" file.
The visibility & graphics settings have not been changed. The worksets settings have not been changed. We have been unable to overcome this issue. We are simply flippiing between different design options and the linked model disappears.
I'm attempting to delete a design option that we created in order to alleviate model creation conflicts. We were testing whether it was to be a sub-category design option or a main heading, so I just modeled a couple things (in a floor plan that was created months ago in another design option) to try and get them to show up. When I realized that sub-category was not the way to go, I tried to delete that design option and it removed the floor plan I was using.
I examined the "Visible in Option" line and it has the name of an option that I'm not deleting, so....? Now what? I just want to clean up my model and remove that test design option.
I am currently working on a home where i need to have a single slanted roof go across the perimeter of the home to form a roof. But, i have run into the issue of not being able to connect the circled area(see attached) Is it possible to connect those separate roofs and if so how?