Working on the trial x5 and have a random problem. Imported videos, 1280x720, randomly display a stutter in the audio track when playing in project mode. Play fine in clip mode. Play fine before import. Video plays fine. Also weirdly, if I stop and restart the video at the point of stutter, the stutter goes away. By random, I mean 4 out of 5 videos imported in the same format work fine and the place the stutter start seems random between clips that display the problem.
I am using the default settings of the download trial, though I have messed with the proxy, edit format, and other settings to no avail. I have installed the recent service pack.
System: Toshiba Laptop, Windows 7 Home Premium, dual core pentium 2.0 Hz, 3 gig installed memory.
Vidoes are captured with an android phone and properties are H,264, 24 bit, 1280 x720, MPG4, Interestingly the frame rate seems to vary between 19 and 26 fps., Audio is 44100Hz 16 bit stereo 96Kbps bitrate.
I've use x2 on a multimedia tower no problem but I've gone mobile. This problem makes the software almost unusable for me. Three or four out of five imports with same parameters (except the variable frame rate) work fine.
While using X3, on a Vista 32 bit, 2.1 ghz dual core, 3gb ram, a 7600GT card -- while editing HD video, I get a lot stuttering during playback in edit mode -- often the sound stumbles too, all of which makes it hard to see how my work is progressing.
Checking the task manager, the memory is only about 50% used and processor doesn't appear taxed, so question is, why is this happening and what can I do about it.
I have just put together a 20min video and have several times created an mpeg file on the hard drive as I edit different parts, so that I can see how it comes along on a main TV thats networked to my PC. The footage is from two Panasonic HD cameras and is filmed in AVCHD.
The last two copies I have rendered have 4 scenes with noticeable jumps/stutter. They are all taken from and are part of a clip 146, the music track dosent jump, just certain parts of the scene in the video. This jumping is intermittent in about 30 seconds and the rest of the 20min film is fine. No filters or adjustments have been made to these scenes and they were fine up until yesterday. I tried a second render but its the same.
I would like to know what causes it so I can either avoid this happening again or avoid VS altogether as I have put in a lot of time and work into this 20min video and I don't want to have to do it again, I really want something I can rely on. I have had VS from the very earliest version and I have found that these bugs keep cropping up.
UPDATE:I have done further tests and it is ok if I "Create Video file" Same as Project Settings" BUT if I "Create Video file" DVD Video" it stutters/jumps. I have attached the properties of the scene now.
Most of the footage is Panasonic AVCHD and I use Two Pass Encode. Am I using the correct settings for this type of film. I want to film in the highest quality so that I can copy to blue ray and standard DVD.
My project settings are:
Two Pass Encode PAL (25 fps) MPEG files 24 bits, 720 x 576, 25 fps Upper Field First (DVD-PAL), 16:9 Video data rate: Variable (Max. 8264 kbps) LPCM Audio, 48000 Hz, Stereo
The DVD settings are:
MPEG files 24 bits, 720 x 576, 25 fps Upper Field First (DVD-PAL), 16:9 Video data rate: Variable (Max. 8000 kbps) Audio data rate: 384 kbps Dolby Digital Audio, 48 KHz, 3/2(L,C,R,SL,SR)
I use two cameras to capture video. I have been using my Sony DCR-SR47 Almost since the day I bought VSX3. I am still using both. However I am now having stuttering in the audio. I do not have to render the video. I can import the video and play a clip fine, once I trim it then do a playback without rendering it I get the stutter. It occurs at regular intervals.
Here is an example [URL]..........
The audio is also giving me a "reverb" effect. Like a barrel effect. This is the input format of the footage. This is the output footage
Here is another example, here I converted to AVI, yet same effect. [URL].......
Output: Using Windows XPSP3 with all current updates. And have all codex installed. I did switch from using CCCP codex package to K-Lite recently.
. I have CS6 Pro and my video is very choppy. I used to edit in Sony Vegas and my videos play fine there. I wanted to step up and edit with a more advanced editor and it doesn't work!!! Here is what I do. Shoot with GoPro 3, take the video to GoPro Studio and make a MOV. file to remove fisheye. Take the MOV. file and edit it with Premiere. It plays smooth for 3-5sec then starts to stutter. My specs on my computer are:
i7-4700MQ CPU @ 2.40GHz 8GB Ram 64-Bit Windows 7 Pro SP1 7200RPM HD NVIDIA GeForce GT 750M w/2GB
Again my Sony Vages $70 program can edit without any problems but I am stuck with CS6!!!!
I would like to take my many photos and videos and be able to batch edit a folder's worth at a time after they have been added to my timeline. I have several that have the same lighting problems and that would save me allot of time.
I have created three projects and produced from them 3 perfect MPEGS (PAL DVD 16:9 Stereo) - I am now trying to put them together into one single MPEG, but the finished MPEG audio stutters occasionally. I am going to try and remove the additional link vids in between them and see if that makes a difference. Let me know if you need any more info.
I have an HV 40 and take the video off with Hd Split.I put 30 minutes of video in the time line and then want to break it up to 8 -9 minute segments. I tried using the scissors to cut each segment and then delete what I don't want and share - output - mpg optimizer. That gave me five files. The first one is fantastic, what you would expect. The rest all have a jump or stutter at the beginning. Just for one second of play, the rest is great.
So I thought I must be doing something wrong, and then started over with multi-trim. I cut the five segments out using that and the same thing. I thought I would live with it. So then I converted all the clips to MP4 HD. Just to reduce file size and make easier to upload. Now the thing I was going to live with looks twice as bad. It went from being almost unnoticeable to a major glitch. Rest of video plays great and you can hardly tell any quality difference between it and the original.
So then I started playing around with cutting off the front 1.5 seconds of the clip and that seems to actually work. To get rid of it. But it is more work and I don't think professional.
Then I read something about fade ins so I tried that. I took the original first cut of the second segment and put it into the overlay track and used the little fade in slider in the preview window, to have a slight black fade into the clip. This covers up the jitter but the entire clip is now noticeably degraded. I mean it looks lousy!I went straight to mp4 this time, instead of making the fade and then using the optimizer to go to the same format and then convert.
So now I am a bit discouraged. I have a fast six core computer am using the latest corel x4 pro and it seems that things are not going to go very well. Simply cutting the video to make edits results in jitter at the start of each cut clip and messing with a fade in just ruins the quality. What to do?
[URL]
BTW going from the mpg to the mp4 reduces the size by about half which makes up load reasonable, but still an all night affair.
I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
I have a LIVE show recorded and I want to add Video Filters in various places within a single 4 minute video. Do I need to cut up my video to segments to add filters too or can I apply them to different spots in a single video?
Kelby's book shows how to edit a video in Develop by Capturing a Frame, then opening the Frame in Develop mode, selecting the video, and turning on Auto-Sync so that changes to the photo will also change the video. Not all edits are possible. I was hoping that cropping with the Rectangle tool would work, so I gave it a try. No luck. Indeed, LR5 tossed up an debugger-style error message.
An internal error has occurred. ?.0: attempt to perform arithmetic on a nil value.
I find that if I have some video that has poor color, if I grab a still from it and bring it into GIMP, GIMP does a good job on correcting it.
Now, I'd like to know what color correction settings were applied by that filter so that I can go back to my video editing package and apply similar color corrections across the entire video clip, not just the still.
When working in Photoshop CS3 I get a lag on my cursor if I use the space bar to enable the hand tool and move around the canvas with my mouse. The problem disappears as soon as I use control + space bar and zoom in or alt + space bar to zoom out. However the very next time that I use the space bar to move around, the delay comes back until I zoom in or out. This happens with my mouse or my Wacom tablet. It makes the Wacom tablet almost unusable.
Just upgraded from X4 to X5, and it seems something is wrong. When I click the Auto Music icon, all options are greyed out.
Okay, it's been over six months since I last used VSX4, but I don't remember having to do anything special to use Auto Music.
Computer is: Dell XPS 8300 Intel Core i7-2600 CPU @ 3.40GHz DDR3 SDRAM 8 GB Motherboard - Dell Inc. 0Y2MRG Graphics - AMD Radeon HD 6450 OS - Windows 8 Pro
I have uninstalled/reinstalled several times, and have installed VSX5 SP1.
I just finished a project in Vx5 pro but was unable to save it. When I tried to save it I got a message "could not save data" and the program shut down. Usually after a computer crash etc when I open Video studio again I get a message "would I like to reload the previous project", however on this occasion it didn't give me that option.
I have it set to do auto backups every 5 minutes but can't find where they are stored. I can rebuild the project but would save heaps of time if I could find the backups.
I hit Automusic in X5 pro. It came on and now I can't get it to go away. Didn't mean to get it going but there seems to be no way to turn it off and get rid of the trak. Do I have to reedit this whole video starting again. There must be a way, but I just can't seem to find how to turn it off.
I even uninstalled automusic from the computer - no luck. there is a little brown line begins at 3 seconds and runs just over the video track. Is this automusic or something else?
I have a few questions i just downloaded the demo version
1) how do i set it up to auto detect chapters in corel video studio x5 2) i am trying to burn dvd from a sony ccd - trv43 camcorder what are the best setting to use to burn the dvd .
why my crosshairs stutter after I select an object? I first noticed it after the AutoCAD release that added vertex control options to plines. Crosshairs hang for a second or two after selecting an object that has vertices. Seems like CAD is evaluating the vertices.
when using the dv to DVD wizard to create my movie i cannot figure why, when the wizard compiles and burns my movie(regardless what menu template i choose) ,the DVD menu always has the date the movie was created in bold letters imprinted on the left side of the screen.how can i disable this?
I have photoshop cs4 and I cannot find the Auto smart fix, auto levels, and auto contrast nor the adjustment for each that I had with photoshop elements.
I've now had this happen with two completely separate projects today where I preview my edit, everything looks and sounds good, but then when I export there's a clear audio stutter wherever I used a constant power audio tansition.
NOTE: I experienced the Constant Power bug that happen last month that sounded like a super loud buzz. This is different.
I have reinstalled this program 3 times arlready and the Auto Music feature still does not work? Every time i make a project and want to add some music off the Auto Music feature the whole program crashes instantly? I keep getting over and over again, Unspecified Error? Everything thing else works in the program except the Auto Music.
Is there a way to set 20 fps for my video in corel video studio x3 ?
i made a 3d animation and rendered about 3000 single frames as .bmp . Now i want to put them together to a video. the speed of the animation is preset, so i need every frame to show up for 0.05 second..... 20 fps not 15, not 24, not 25 and not 29.97, but exactly 20 fps. i don't know if i am just very stupid, but i can not find the settings for this.
With the installation of SP1 (VSX4), the options to create a blu-ray video file (assuming 1920x1080 only, though the same options exist for 1440x1080) are now:
Blu-ray (1920 x 1080) Blu-ray H.264 (1920 x 1080P) Blu-ray H.264 (1920 x 1080)
Now, I want to create a 'standard' Blu-ray disc of family videos. My camera is a Canon Vixia HF20, recording in 1920x1080 in the '60i' mode. The camera creates AVCHD formatted files. I know I don't want the progressive option, however, what is the difference between the other two options (is it MEG4 vs. AVCHD? If so, what should I choose when creating a new disc?). I want my disc to support as many blu-ray players and HDTV's as possible since I will be giving copies to various family members (meaning I don't want a format that supports only the latest releases of blu-ray players).
