VideoStudio :: Pro X6 Frozen On Startup?
Nov 30, 2013
I was looking for a video editing program, and after reading good reviews for VSP x6 I downloaded the trial. It installed and started up the first time fine without any problems. I was able tinker with the program and began to like it.
However, I closed it out to take a break, then came back to it (same day, and hour later) now every time on startup it hangs on the overlayed "Corel Guide" flash intro. The window pops up and allows navigation of the "Corel Guide" and I am able to click-through of the links, but it will not collapse the guide or let me use the actual program at all. I also can not close the program either without using task manager. I am only on day 1 of the 30 day trial. I have attached a screenshot.
My cpu should be able to handle the program without a problem, it is running Win7 64bit, with 16GB Ram, AMD Phenom II x6 Processor, 3.20Ghz
View 5 Replies
ADVERTISEMENT
Oct 26, 2010
It occurs only in Corel Video Studio Pro X3 ... two extra (frozen) frames for free. In other programs all frames of my camera act correct.
At the beginning of each video file there are two extra frames at the timeline, so each video file starts with three identical frames and that causes each file starts with 0,12 sec frozen video.
When I remove the two frames, two frozen frames are added at the end if a file! In the end-product there are three frozen frames between each cut! And 0,12 seconds is visible …
View 14 Replies
View Related
Aug 13, 2011
I've been using VSX4 for about 4 weeks without any problems, aside from the very occasionaly crash. The last time I used it was three days ago.
I've tried to use it today to find it crashes at startup every time. I have restarted my PC several times to no avail. As far as I can recall, I have not installed anything in the last three days, or updated drivers.
I have uninstalled and then reinstalled. Again, to no avail.
VSX4 creates a dump file each time, which I can't view in any software I have.
I have tried contacting Corel but get a very cryptic message that a case has been created then "Case creation fail" message!
View 2 Replies
View Related
Apr 25, 2012
I've been using VSX4 for about 4 weeks without any problems, aside from the very occasionaly crash. The last time I used it was three days ago.
I've tried to use it today to find it crashes at startup every time. I have restarted my PC several times to no avail. As far as I can recall, I have not installed anything in the last three days, or updated drivers.
I have uninstalled and then reinstalled. Again, to no avail.
VSX4 creates a dump file each time, which I can't view in any software I have.
I have tried contacting Corel but get a very cryptic message that a case has been created then "Case creation fail" message!
View 1 Replies
View Related
Jun 26, 2013
X6, how to disable "what's new" at startup? tx
View 4 Replies
View Related
Aug 25, 2011
When I launch X3 I get a popup window "Messages" which has been blank/empty and you have to click on close to start VS X3. I already removed the checkmark in message preference. How do you get rid of this from constantly popping up on startup? Is this related to the constant error message I get whenever I exit out of X3?
View 7 Replies
View Related
May 26, 2011
I bought a full copy of Videostudio Pro X4 about a month ago after experimenting with the trial version for a good while, and it was all running smoothly until I was adding some rain effects to a rather large movie, and it said something along the lines of not enough space to load something, and then all the FX thumbnails disappeared. When i closed the program and tried to reopen it, it said "Error loading from stream" followed by a "Videostudio Pro has encountered an unspecific error and needs to close, please contact Corel Support and include a copy of the Dump file.". And now every time I try to load the program it gives me this error, and thats without loading the actual project that the file had the initial error on. All the files within the folder were captured via VS either as Video or as Stop-Motion so are under the default settings as I havent changed them or converted them atall.
I cant find anything on the knowledge base about this, and neither on these forums. I'm unsure how I send the Dump File, which I have found to Corel? I'm abit confused from the warranty support bit of the page where it says about having a one-off chance to contact them? So obviously I dont want to mess up my one chance so thought I'd check here what to do next!
A re-install of the program seems the logical next step but will I lose my project?
View 3 Replies
View Related
May 17, 2012
I get this error whenever I try to start the trial of VSx5 (Funny thing is, I am trying it because Pinnacle 15 is far too crashy for me.)
View 4 Replies
View Related
Feb 15, 2012
I installed Corel Video Studio Pro X4 Ultimate on my laptop at the end of last year and up until now it has been working fine. Because I was not happy with the final dvd of hd footage (I don't have a blu ray burner) despite trying all the settings I purchased Pinnacle Studio 15 ultimate because that seems to give a better result when burned to disc. At first Pinnacle was not working in that all of its elements were not accessible so I was editing my footage in Corel and then burning the end result in Pinnacle. Having gone on to the Pinnacle Forums I was advised to change from the default computer desktop theme of Aero to Windows Classic and change the display to smaller - 100%. This solved all the problems with Pinnacle and it is now working properly. However, when I tried to open Corel it came up with the message Corel Video Studio Pro has stopped working, close the programme. I have uninstalled it and reinstalled it and it still refuses to open up. Until changing the desktop theme Pinnacle and Corel did not appear to conflict with each other so I had no reason to think there would be a problem running the two applications.
I have taken a screenshot of the error message but cant seem to paste it to the post.
I now am running a Core i7 -2760 QM CPU @ 2.40 GHZ laptop
16gb RAM
Windows 7 Home Premium
64 bit
View 4 Replies
View Related
Oct 19, 2005
Im a beginner to photoshop and have been working on a logo for my upcoming business venture....but i am stuck trying to make some text that i made look frozen or made out of ice....something along the lines of this..
View 6 Replies
View Related
Dec 1, 2013
I have a Render message that reads in red type "FTL: Virtual device creation failed." And I'm unable to click out of the message box, or click OK or cancel. Nothing happens. There seems to be a problem with my screen as well, it holds onto prior open windows and I'm unable to have a fresh window in Max. Does any of this have anything to do with os Windows 7 Home Premium vs. Pro or Ultimate? Even some of the tasks in Max don't seem to be initializing. For example, I tried to Manage>Set up Project and clicked on file in Windows 7 Home Premium and nothing happens.
View 5 Replies
View Related
Feb 19, 2013
I am trying to edit photos using actions I purchased for PS CS6. I started on a batch of photos from the same shoot. I got about 7 shots deep and suddenly I can't "Play" any of the actions. I can't do anything with regards to actions. I do not know how to fix this! I have a client waiting for photos and I can't do anything.
View 3 Replies
View Related
Aug 26, 2013
I am facing a very similar problem as the user on this thread:
[URL]..........
Essentially when I open up the liquify tool, even if I just press cancel, Photoshop will just freeze and I have to kill the process manually. I suspect it is a video card issue, so I checked and ensure the laptop is using the latest driver. Mobile Intel® 4 Series Express Chipset Family (driver version: 8.15.10.2869, ig4icd64.dll)
Since I am already running the latest driver, what else can I do to rectify this problem?
View 8 Replies
View Related
Nov 20, 2013
The registration screen is frozen. I restarted the computer but same thing happened. I cannot use Photoshop.
View 1 Replies
View Related
Jul 10, 2013
The PS in my CS6 wont open. I have uninstalled and reinstalled, same problem, I did change a preference for storage of photos to and external harddrive because of large files prior to any trouble is all I can think off ,but if that is the problem..how do I change that preference if I can't open the program, Im on a mac 10.8, its only a month old etc ..
View 3 Replies
View Related
Jun 4, 2011
In trying to import image files in CorelDraw X3, I click to select file file to import and Corel freezes showing the hourglass and I get "not responding". It is locked!
All else works fine. I tried re-install, default reset and looked for any upgrades with no success. I'm running on XP Professional and SP3.
View 3 Replies
View Related
May 10, 2012
When working with an xref background, we are experiencing really bad lag, and delays when working with objects that are drawn on top of an xref. I have restarted the affected computers, restarted the server that all files are housed on, upgraded the network switch...with no results. Tasks that should take fractions of a second, are sometimes lagging anywhere from 3-15 seconds depending on what layers of the xref are un-frozen and visible.
View 9 Replies
View Related
Dec 20, 2013
Whenever I freeze an object, either with "Display Frozen meshes in gray" turned off or on, they disappear completely from the scene. Even though they are still there, because if I "Unfreeze All" the meshes will pop back in the scene.
Almost as if freezing the object also automatically hides it, which is very problematic.
Using:
Autodesk® 3ds Max® 2014 16.0 SP3 commercial
Windows 8.1 x64
Nitrous ( Direct 3D 11.0 Feature Level 11 - NVIDIA GeForce GTX 780 )
----------------------------------
Specs:
Autodesk® 3ds Max® 2014 16.0 SP3 commercial
Windows 8.1 x64
Nitrous (Direct 3D 11.0 Feature Level 11 - NVIDIA GeForce GTX 780)
View 5 Replies
View Related
Feb 21, 2014
What can I do if I am unable to retreive my Serial Number? I've entered my redemption code, clicked "Redeem", and NOTHING! It does nothing. I've triple checked the number. It's right. It's just not submitting it.
View 1 Replies
View Related
Aug 25, 2013
while the catalog was optimized, LR4 seems like frozen.
View 1 Replies
View Related
Jul 16, 2013
I just tried to open LR4. It opened, but then a screen with "An internal error has occurred" and a long string of words and symbols is in the middle and LR is frozen. I did a force quit and reopened to the some thing.
View 4 Replies
View Related
Nov 7, 2012
USING MAC, CS 5.5: When I open the image size dialog box -- as well as the canvas size box -- for any file; new or existing, and try to change the size, the box either won't let me change the number, or it closes out. Doesn't scrash the app; just refuses to cooperate.
View 4 Replies
View Related
Jul 9, 2012
I have a sub that gets a page number and a collection of layer ID's to freeze. The sub will freeze the selected layers in all of the viewports except for the new one.
After running the program, the layers in the specific viewport are still visible, but when you go into Model mode in the viewport and check the layer status, it shows the selected layers are set to Freeze in the viewport.
If I save the drawing, exit,and re-open it, the layers are now not visible. I believe I have the "Regen" in the correct spot.
The code is attached.
' Freezes the selected layers in all other existing viewport layouts Public Sub freezeOtherLayouts(ByVal pageNumber As Integer, ByVal layersToFreezeLayerIds As ObjectIdCollection) Dim doc As Document =
[Code].....
View 9 Replies
View Related
Sep 28, 2011
I'm using a typed value list to create a selection filter to use with Editor.SelectAll(filter) method. The selection returns both frozen & un-frozen entities. Is there a way to filter out frozen objects using the filter?
View 2 Replies
View Related
May 27, 2011
I have random objects, eg lines or text that I can't select, even to see what properties they have. none of my layers are frozen.
View 9 Replies
View Related
Mar 19, 2013
Having problems with the Hide Frozen Objects checkbox in 2013? It's just not working at all for me.
View 2 Replies
View Related
Apr 24, 2012
When hovering over this button in the layer manager the following is displayed.
"Creates a new layer and freezes it in all existing layout viewports. This button is accessible from the model tab or layout tabs".
Key words here being EXISTING and LAYOUT viewports. So I've got an existing xref attached to an existing layout and per the displayed tip this means, to me, any new layer created within the xref that has this option enabled will be frozen in all existing layouts.
Since a layout is a viewport, I assume this means the layout itself, not a viewport object used for viewing modelspace content from a layout.
Even if this means a viewport object used for viewing modelspace content, that doesn't work either, so what exactly is the point of this feature?
View 9 Replies
View Related
Jan 10, 2013
Another problem already! My tool options dialog box is greyed out and will not respond; won't allow me to choose options.
I clicked it off and brought it back (via windows, etc.) but it's still grey and nonfunctioning.
How can i make it work?
View 2 Replies
View Related
Sep 28, 2012
One of the computers that have AutoCad installed will not load all the way. It will start to show the welcome screen and the it will freeze. Looking on the internet that you go into task manager and kill the process called WSCommCntr, but it is not appearing in the task manager.
Originally the pc was on XP SP2 and with .Net 3.5. I updated both to the latest version. I have reinstalled AutoCad and I am still getting the issue. All hardware checks passed.
Also the issue sounds just like the one here URL.... , but I uninstalled the .Net Framework and reinstalled version 3.5 SP1. That did not work so I uninstalled that and put on 3.5. This still is not working.
View 5 Replies
View Related
Oct 15, 2013
I have an assembly file I am trying to put together with parts I downloaded from grab cad. I believe the parts were originally modelled in solidworks. I tried scaling some of the parts to be more my size and was directed to inventor fusion where I was able to scale the parts but now the assembly is acting strangely. As soon as a part gets one constraint applied to it n the assembley the part wont move like it is grounded but its not. When I click degrees of freedom it says the part has some. Why the assembly is acting like this? The file is attached.
View 2 Replies
View Related
Sep 24, 2013
One is as follows: I start in library mode/grid. I have a publish service that exports to hard drive, with some folders configured. I click on any folder, I see the correct pictures. Clicking on any folder inside the service lets me see the right pictures. Now I click on any other folder outside of the publish service (say, a collection, a smart collection, a folder... whatever) and... neither the thumbnails in the grid nor the filmstrip at the bottom are updated; the only part of the screen which is updated is the filmstrip description (i.e. I read Collection: blahblah, 123 photos).
View 2 Replies
View Related
