When I launch X3 I get a popup window "Messages" which has been blank/empty and you have to click on close to start VS X3. I already removed the checkmark in message preference. How do you get rid of this from constantly popping up on startup? Is this related to the constant error message I get whenever I exit out of X3?
View 7 Replies
I installed Corel Video Studio Pro X4 Ultimate on my laptop at the end of last year and up until now it has been working fine. Because I was not happy with the final dvd of hd footage (I don't have a blu ray burner) despite trying all the settings I purchased Pinnacle Studio 15 ultimate because that seems to give a better result when burned to disc. At first Pinnacle was not working in that all of its elements were not accessible so I was editing my footage in Corel and then burning the end result in Pinnacle. Having gone on to the Pinnacle Forums I was advised to change from the default computer desktop theme of Aero to Windows Classic and change the display to smaller - 100%. This solved all the problems with Pinnacle and it is now working properly. However, when I tried to open Corel it came up with the message Corel Video Studio Pro has stopped working, close the programme. I have uninstalled it and reinstalled it and it still refuses to open up. Until changing the desktop theme Pinnacle and Corel did not appear to conflict with each other so I had no reason to think there would be a problem running the two applications.
I have taken a screenshot of the error message but cant seem to paste it to the post.
I now am running a Core i7 -2760 QM CPU @ 2.40 GHZ laptop
16gb RAM
Windows 7 Home Premium
64 bit
Recently I have been receieving the following error message when Photoshop CS6 x64 srtarts up on my Windows 7 machine. Ps resides on my SSD.
I don't always get the message but when I press X, Cancel, Try Again, or Continue the message repeats until finally Ps starts. I'm not sure what drive DeviceHarddisk3Dr3 is supposed to mean.
Every since installing 2013 on my iMac system, I get a pop-up window everytime the computer boots up. Here's the message:
Insecure Startup Items folder detected. Items in the Startup Items folder (“/Library/StartupItems/”) have not been started because the folder does not have the proper security settings.
Every so often when I open 2013 inventor it freezes at the startup window. the "progress bar" at the bottom gets about 75% across, then freezes. If I click on the window it, a dialog box appears that will let me close the program or check online for a solution. It has happened on all 7 machines here.
Dell t1500 i7 8 gb ram
Windows 7 64 bit
ati firepro v4800
I have been using Photoshop CS3 Extended for quiet a while without problems.Suddenly a blank registration window shows up whenever I need to use the program.Because I am unable to do anything with a blank window I cannot dispose of it and I cannot get past it to complete the startup process so I have to force quit the program.I have registered this version probably more than once so I can't imagine that to be a problem. I always use a partitioned drive with a full copy of the OS and applications installed on it.The same problem exists with that copy of Photoshop as well.
I am using an early Mac Pro with Snow Leopard.
I have uninstalled the program and reinstalled it from my original disc but the same problem still exists.How do I solve the problem of being "locked out" of the application as I am also locked out of work as well ?
Upgrading to a later version is not an option at this point.
I am searching for the "mental ray message window" in the 2012 version. ok i've got the German version, but there is only a "rendermeldungsfenster"(render message window) where only the errors are shown. is there any other possibility to see how many final gather points are in the scene?
greetings, mredl
I have been working with LR 2.7 for a while now and was happy with it.
PC - Win XP - LR3.5
Photo's stored on external hard disk (K:)
The RAW captures of a Nikon 3100 I recently won were not being recognized/imported by LR 2.7 and I installed the 3.5 version to see if it was any better. I would have to buy it anyway by the time I switch to Win7. In 3.5 the Raw files were imported, the settings of 2.7 were nicely taken over but now and I cannot export the files I have worked on to the K: drive of the external hard drive as I used to do with 2.7.
I get the message 'The folder could not be found' though it is set in the Export Window and I am looking at it in Win Explorer.
The original RAW captures are on the D: drive but that was always the case with 2.7 as well... I am doing it exactly as I used to with 2.7.
I tried with a photo from an older folder of my usual camera and everything works fine there.The problem seems to be only with the Nikon files. Now I start wondering if there is something with raw format of this Nikon camera that is putting LR in a twist...
I've been using VSX4 for about 4 weeks without any problems, aside from the very occasionaly crash. The last time I used it was three days ago.
I've tried to use it today to find it crashes at startup every time. I have restarted my PC several times to no avail. As far as I can recall, I have not installed anything in the last three days, or updated drivers.
I have uninstalled and then reinstalled. Again, to no avail.
VSX4 creates a dump file each time, which I can't view in any software I have.
I have tried contacting Corel but get a very cryptic message that a case has been created then "Case creation fail" message!
I've been using VSX4 for about 4 weeks without any problems, aside from the very occasionaly crash. The last time I used it was three days ago.
I've tried to use it today to find it crashes at startup every time. I have restarted my PC several times to no avail. As far as I can recall, I have not installed anything in the last three days, or updated drivers.
I have uninstalled and then reinstalled. Again, to no avail.
VSX4 creates a dump file each time, which I can't view in any software I have.
I have tried contacting Corel but get a very cryptic message that a case has been created then "Case creation fail" message!
X6, how to disable "what's new" at startup? tx
View 4 Replies View RelatedI was looking for a video editing program, and after reading good reviews for VSP x6 I downloaded the trial. It installed and started up the first time fine without any problems. I was able tinker with the program and began to like it.
However, I closed it out to take a break, then came back to it (same day, and hour later) now every time on startup it hangs on the overlayed "Corel Guide" flash intro. The window pops up and allows navigation of the "Corel Guide" and I am able to click-through of the links, but it will not collapse the guide or let me use the actual program at all. I also can not close the program either without using task manager. I am only on day 1 of the 30 day trial. I have attached a screenshot.
My cpu should be able to handle the program without a problem, it is running Win7 64bit, with 16GB Ram, AMD Phenom II x6 Processor, 3.20Ghz
Just recently, upon closing PSP x5, a message window pops up, the title area usually references using the e-learning center or "Explore more ways to learn and love photography", but the window itself is empty except for the message "Do not display this message again" with a checkbox and a Close button. The Close button does not work, nor does the red X close window button. I have to go into Task Manager to finish closing the program.
I'm on a Windows 8 machine and this just started happening after months of use.
I have recently installed Civil 3D 2013 and was configuring my options to how I have done so for the last few year and when I tried to change the message window font from the default Courier new to Courier I could not find said font. How to get this font or if it has been removed from 2013?
View 1 Replies View RelatedI bought a full copy of Videostudio Pro X4 about a month ago after experimenting with the trial version for a good while, and it was all running smoothly until I was adding some rain effects to a rather large movie, and it said something along the lines of not enough space to load something, and then all the FX thumbnails disappeared. When i closed the program and tried to reopen it, it said "Error loading from stream" followed by a "Videostudio Pro has encountered an unspecific error and needs to close, please contact Corel Support and include a copy of the Dump file.". And now every time I try to load the program it gives me this error, and thats without loading the actual project that the file had the initial error on. All the files within the folder were captured via VS either as Video or as Stop-Motion so are under the default settings as I havent changed them or converted them atall.
I cant find anything on the knowledge base about this, and neither on these forums. I'm unsure how I send the Dump File, which I have found to Corel? I'm abit confused from the warranty support bit of the page where it says about having a one-off chance to contact them? So obviously I dont want to mess up my one chance so thought I'd check here what to do next!
A re-install of the program seems the logical next step but will I lose my project?
I get this error whenever I try to start the trial of VSx5 (Funny thing is, I am trying it because Pinnacle 15 is far too crashy for me.)
View 4 Replies View Relatedwhen trying to create a panorama on Element 11 I get error message: window does not have a construct
View 1 Replies View RelatedI have been using PS for about 2 moinths. The program has developed a fault that reads
The procedure entry point ister WindowMessage could not be located in the dynamic link library USER32.dll.
I have tried uninstalling and re-installing but to no avail,
Using PS CS on XP with SP2 installed. Program was working fine.
When I suppress a part or a sub-assembly in Inventor 2013 and then right click on the suppressed item in the browser window I always get an cadabundus error message (see attachment), after I press OK I get the normal right click menu hovering over the item.
I have Inventor 2013 RTM 64 bit Build 138, and running on Vista 64bit.
I'm working with our new copy of AutoCAD 2013 and using the Visual LISP IDE to create code. I also have an AC2009 machine right next to me for other tasks. On the 2013 machine when I click the "Load Active Edit Window" button it switches to the console screen but there are no messages printed like:
$
; 37 forms loaded from #<editor "C:/LISP/My-Lisp.lsp">
_$
This of course is making it extremely difficult to debug. I have checked the environment settings and they are exactly the same on each machine. The AC2009 machine prints the messages but the AC2013 machine is just giving me a blank console screen.
I have VSx5, and I've gotten an error message or two,telling me that my GPU unit is not up the task. This happens when I'm running a few of the more demanding things, it came up when I was using the Vitascene filter and also in Boris Graffiti. Does this mean I should get a better graphics card? I have an ASUS i5 laptop, and as far as I can tell my GPU card is the Intel HD graphics 3000.
View 7 Replies View RelatedAs it did not working well in Win7, I have been uninstalling VS Pro X2. So, I purchased the downloadable upgrade version of VideoStudio Pro X3. The problem : I'm not able to open an existing VSP file. I get this error message : The file "name.vsp" is already in use.
View 14 Replies View RelatedI've been a Corel Video Studio user for almost 10 years and never ran into this issue. When creating a disc (DVD or Blu Ray), I get an error message while the program is "converting the menues" for burning to blank disc. The message reads "convert step got some problems (257.0.0)". Figuring that something got corrupted, I closed the program and rebooted the computer. I then again set up the menues I wanted to use only to get the same error message. I then decided to burn a previous project that I knew to be successful and it burned properly. I then decided to create a new project using the same video files and menus that previously failed. That too proved to be unsuccessful. I went to Corel's website but there was no info available covering my error message.
View 2 Replies View RelatedEvery so often - about once in 12-15 cold starts - as the boot cycle closes, I get a message box saying a specific vs.......exe file did not start. The message box is as follows:
View 3 Replies View RelatedWhen I went to add text to a video sequence in the Title feature, the words "Double-click Here to Add Text" appeared.
Which I did. The text I wanted appeared in the sequence and showed up OK after saving and replay--but so did that "Double-Click Here to Add Text!"
I couldn't figure out how to delete THAT unwanted message--any hints on how to do that?
I thought i was getting this message when i enabled ripple select all but now i am randomly getting this message anytime i am using VS. I use VIDEOSTUDIO PRO X3 and i believe i have updated the necessary updates for it . After i get this message, it shuts down VS and i have to restart the program.
View 6 Replies View RelatedWhen I go to import a clip into videostudio, I get this message: "no storage to save BB" I click ok, then I get the "load from stream error" message.
Here is my info:Windows XP, videostudio 12, Dell Dimension E520. I'm importing an uncompressed AVI (I've done this loads of times with not problems) and I get the message while it's importing.
I have had this product for about a week and it is fabulous compared to any other video editors I have tested.
There is something odd happening, however. I am using the Mercalli plug-in to stabilize hand-held videos. This works great but the rendered video always has a message overlaid saying the Mercalli analysis must be re-run (even if it has just been done). There IS an exception: render to mpeg4 and everything's fine - stabilization has been applied and no message. If I then take the exact same project (no changes) and render into AVCHD (for example), the output is ruined with the overlay. If I go back into the project again to have a look at what's up re-analysis is NOT called for.
I've recently updated one of my PC's. I tried to launch VS x5 and I received a "corrupt file message" with error code 38. I've read all of the previous threads here and others online referring to Protexis Licensing V2 in the Services tab. I've un-installed, reinstalled several times. Would be nice is a "Repair" option was available. I've entered the serial numbers, several times, made it to the "Register Product" page but can never get the program to start. This was an update from VS 4 and I've entered the serial number for that when prompted. I have the program working just fine on another completely new system. Both are running Windows 7.
View 1 Replies View RelatedI'm trying to upload a video into YouTube straight from my Video Studio ProX3. Was able to do it successfully with a video just 2 days ago but for some reason, doing a different video (same videocam & format) it's giving me this error message "The entity name must immediately follow the ',&' in the entity reference". And it won't upload or let me proceed. I have no clue what this means, i tried redoing it and changing the video file name and no luck.
View 1 Replies View RelatedVideoStudio X4 on a Windows 7 PC
I am having a very frustrating time trying to create a DVD from my project.
I am not using chapters or menus at all so they can be ignored. I am simply trying to create a DVD-R from a project that contains 137 video clips (downloaded from my AVCHD camcorder) and a couple of titles. As VideoStudio goes through its compilation of the clips it stops when it reaches the 99th clip and throws up a message stating that ‘a maximum of 99 video media files is allowed’. Which is a crazy imposition to place in an otherwise excellent product! Once that message appears, I can only hit OK to exit and nothing more happens. I cannot add the remaining 38 clips and on closing the program, it does an automatic save and drops out of the DVD creation process.
In an attempt to get round the problem I created a video file (2.5GB) and used Windows Explorer to burn the MPG file to a Phillips DVD-R. No problem there, it even ran automatically on the PC with no trouble, but when trying to play it on my 3-year old Sony DVD Player/Recorder (HXD870) a message displayed on the TV (a Sony Bravia) to the effect that it could not read this type on disc.
