Revit :: Stair Handrail Post Doesn't Connect To Stringer
Feb 4, 2014
I currently have a situation in white my stair handrail mid post wont connect to my stair stringer. I have a C10 stair stringer and am using a modified typer square handrail system I have made. I am sure there is a setting or preference I have missed that is causing this. I have attached an image for reference.
ALSO in the image you can see the top rail does not fully attach to the end post. It sits in the middle somehow. AND that end post sits halfway off the stringer.
View 1 Replies
ADVERTISEMENT
Dec 1, 2011
I am trying to extend a stair stringer past the start of the stair tread. See attached file. I can't seem to get it. What am I missing?
View 1 Replies
View Related
Aug 9, 2013
Can sweep profile cut up to the bottom of stair stringer?
Find attached.
View 7 Replies
View Related
Jan 21, 2008
How do i make a spiral stair stringer in 3d? what commands do i use?
View 9 Replies
View Related
Dec 27, 2011
I need to SWEEP the yellow rectangle in this drawing along the magenta 3DPOLYLINE. This is a stair stringer for a winding stair I'm trying to model. The trouble is that when I SWEEP it the rectangle begins to rotate and ends up all out of whack once it gets to the top.
As I understand it, this is something that AutoCAD does not handle well and something like 3DsMax does. Problem is I don't have 3Ds Max and if I recall correctly there is a way to do this within AutoCAD. I just don't understand the SWEEP command options well enough. I've tried setting Align to No and Twist to the 270° that this thing runs, but each time I end up with the stringer rotated out of place.
View 9 Replies
View Related
Feb 15, 2012
i have been a long user of romcat... but would like to use the new corel connect. i use the folders selected to my HD folder that has all my cdr files (20yrs worth from ver 1). when i type in a search word that is in 100's of my cdr files keywords... connect doesnt display them. In romcat it does display them, even older files, with the same key word. connect only shows cdr files that have in its file name part of the search word, but seems to ignore the key words in the files.
I have all my job files with important key words within them, but the actual file names are simple job numbered names. i noticed on searches from X5 content on dvd, the files also are just numbers, but the search finds key words.
View 2 Replies
View Related
Jan 15, 2013
I am trying to change the profile of my top handrail but i only get W beam in the pull down box. i have inserted both 1" pipe and 1" plate into my drawing and it still want show up.
View 1 Replies
View Related
Jun 12, 2013
I created a new family to use as posts in my handrail system. This is for a deck railing. I'm working on creating a model of the building as it currently stands so I'm able to include a picture of what it actually looks like in real life.
I've also included a screenshot showing the properties window for the handrail (showing what balusters are available) next to the project browswer (showing what families I've got loaded in the file).
In the project browser, I've marked with a red arrow the family that I want to use in my handrail. The ones marked in green are actually listed in the handrail properties window. So how can I make the Dek Rail Post available to my handrail?
I've also included the post family as an attachment.
View 2 Replies
View Related
Aug 9, 2011
I developed a handrail extension that turns down and terminates on top of the stringer and I'm having some trouble controlling the "bend" to get a smooth arc for all angles. Is there away of aligning or constrining the arc in the sweep path to achieve this?
Image with extreme angle attached.
View 1 Replies
View Related
May 24, 2012
Why am I getting this kind of railing and stringer? How do i make the railing and stringer run continuous and smooth?
View 3 Replies
View Related
Jul 10, 2013
I have made a stair by sketch, an u-shaped one. I do have some problems with the 3d model. it will not show up correctly. I add some print screens and you can see.
View 3 Replies
View Related
Apr 3, 2012
I can't get Revit to display the cut material of a stair (landing or run) in 2013 using the new stairs... i have tried different settings in object styles, visibility/graphics, materials, details levels, phasing all without success.
Successfully show material cut pattern on a stair in section?
In the attached i have the new "Component" stair next to the old style "By Sketch" stair, the sketch stair shows the cut pattern the component one does not, this is the same section view not two sections.
View 2 Replies
View Related
Aug 11, 2013
my Stair label text "UP" in my stair.In my properties browser its already checked but still didn't showed up.Anything i need to set?
View 1 Replies
View Related
Mar 25, 2013
I have a client that needed to know the distance required to make a stair case, and when I drew it wight revit 2013, I discovered that I could manually adjust the riser height but was unable to adjust the tread length. I was also unable to end the stairs with a tread rather than a riser, witch he wanted.
View 1 Replies
View Related
Mar 22, 2012
I am having a problem adding a top landing to an external staircase. see below image.
Every time i try and add the top landing i either get boundary error messages or railings surround top landing.
View 5 Replies
View Related
Jul 25, 2013
Is it possible to create a Stair Tag with the pitch reported? I have a tag which includes the number and height of rises as well as the size of treads but I would like to include the pitch also. Obviously this would use the dimensions of the rise and tread in the formula Tan X = Rise/Tread, but how do I create this in a tag? I have looked at using a Reporting Parameter but every time I read the Wikihelp paragraph on them my eyes just glaze over as I cannot follow it at all but it does mention formulas....
View 8 Replies
View Related
Feb 22, 2013
Just Starting with new Revit LT 2013(The Comparison chart from Autodesk lists the differences between LT and Full Revit as no Massing, Rendering and no multi user collaboration) Everything else should be the same!
I'm using 'LT_USI_Residential-Default' Template for my project.In the Stair Family, I have a few options, but not the '7"max riser 11" tread' stair that is available in other Templates.Is there a way to bring that Stair Family into the Template?
Maybe I don't know the 'workarounds', but none of the Stairs available in the above Template have changeable 'width' parameter under 'Dimensions' in the properties window.No matter what I do, all Stairs are first drawn 4' wide, and then I have to edit the width, but it's a pain since I get bunch of error messages and Landings often can't complete and needed to be manually added later.Even though the Type Properties list all stairs widths as 3' min., they still all draw as 4'.What's wrong with these Stairs?
View 3 Replies
View Related
Jan 31, 2012
experiencing monolithic stair with top tread missing - see attached image. The plan has irregular treads and I did pull the top riser line away from the boundary intersection but it had not affect.Or is this just a "feature"
View 3 Replies
View Related
Sep 19, 2011
How can I make the bottom of stair to flat instead of steps?
View 5 Replies
View Related
Jun 11, 2013
Stair tread number tool is wonderful. BUT it is being not printed properly.
Example image attached:
- 'on screen' on the left is taken from my screen. The numbers are shown correctly.
- 'after print' in the middle is a black&white pdf print by adobe pdf. you can see there is the last number missing.
- 'after print-random number missing' on the right is a coloured pdf print also by adobe pdf. several numbers are missing and it happened randomly.
View 8 Replies
View Related
May 20, 2013
Is the any way of saving settings for in particular base level and top level. Always defaults to the current view level for base - can this be overriden permanently. Same for upper level - what lvel does it automatically default. Stair by sketch often involves trial and error and redoing it each time because once done you cant change the levels, rise, width or change the number of segments governed by the path. It would be nice to not have to reset levels each time.
View 1 Replies
View Related
Mar 11, 2010
Is there a way to change the elevation of the cut line for an individual stair without changing the cut line for the entire view? The only way I know change the cut line is thru View Properties > View Range > Cut Plane.
View 7 Replies
View Related
Nov 6, 2012
How to show the sequential numbers on the steps of stair?
I’m wondering if there is a way to show the sequential number on the steps of stair.
Also, we are all the time required to write the number of stairs, run length and rise length on the drawing. Is this possible in the Revit?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 4 Replies
View Related
Apr 23, 2012
I use all the time L shape and U shape winder stairs in combination with the Monolithic Type.
We use to concrete the monolithic part of the stairs and then dress the stairs with treads and risers. The new tool looks that working very nice.
So OK I draw the U shape winder stair and of course i want to construct the stairs.
I want to prepape a detail plan view with dimensions only for the Monolithic Part (Concrete) of the stair but i can't find a way to dispay only the monolithic part without Treads and Riser.It is possible in 3d view but no in plan view. The news tool that calculate winder stairs is "half job done" if i can't print with dimension the concrete part of the winder stairs.
View 7 Replies
View Related
Dec 3, 2013
if this is easy, but how do I calculate the volume of concrete needed to pour a cast-in-place spiral stair?
View 1 Replies
View Related
Feb 6, 2014
Since i have updated to PS CC en Lr5.3 the edit in function in Lightroom doesn't function properly. Or sometimes not at all. I removed the adobe plist files. And then it will work. Accept when I restart the computer the next day. The problem keeps comming back! The operating system is Apple mavericks.
View 4 Replies
View Related
Nov 5, 2010
Have just installed Video Studio ProX3 on a new computer running Windows 7. Software much the same as VS 10 which I ran on a computer with XP.
The new system does not want to connect with my Canon MV930 Video camera. - if it does the picture is frozen and the message - 'Inconsistent vidoe from capture source' appears. Or I get the message - 'No video input source' detacted' appearing.
Could the problem be with the Firewire card/drivers taken from the old computer? - am having this checked out to-day.The software downloads vidoes from a DVD produced by me on the old system quite happily.
View 3 Replies
View Related
Mar 22, 2012
I'm creating a 3d ramp and need to create one surface of the whole thing, but as its overlapping on certain areas the surface keeps attaching itself to the corridor below it and another corridor crossing over top.
how to create a smooth surface that doesnt connect to anything overlapping it?
View 2 Replies
View Related
Jul 2, 2012
I have a problem where I am unsure if my upgraded template is incompatible with Revit 2013 or is there something else at play.
If I create a precast stair in default template I get "end with riser" turned on automaticaly. If I copy that stair to my template and create new stair, "end with riser" is turned off and I manually have to adjust stair afterwards.
Problem is "end with riser" is now an instance parameter of stairs and I can't find where to change the default value.
Why is the stair type that works in default template stuffed when copied to my template?
View 2 Replies
View Related
Sep 9, 2013
The beam is continuous. The connection details are not important. They're some kind of plate welded to the beam and bolted through the column web. I don't need it to be able to do structural calculations.
Join won't select a structural column or beam. Align creates a rotation error because of the beam's pitch. The column height appears to only change by the Level, but again the beam is pitched. Setting the height above the beam breaks the beam.
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
View 2 Replies
View Related
Jan 4, 2012
I got trouble connecting my exterior wall to the roof or in other words, it would be good, if the insulating layer would not be pierced by concrete (-:
Picture attached.
View 5 Replies
View Related
