Revit :: Can Stair Stringer Be Extended
Dec 1, 2011I am trying to extend a stair stringer past the start of the stair tread. See attached file. I can't seem to get it. What am I missing?
View 1 Replies
ADVERTISEMENT
Revit :: Sweep Profile Cut Up To Bottom Of Stair Stringer?
Aug 9, 2013Can sweep profile cut up to the bottom of stair stringer?
Find attached.
Revit :: Stair Handrail Post Doesn't Connect To Stringer
Feb 4, 2014I currently have a situation in white my stair handrail mid post wont connect to my stair stringer. I have a C10 stair stringer and am using a modified typer square handrail system I have made. I am sure there is a setting or preference I have missed that is causing this. I have attached an image for reference.
ALSO in the image you can see the top rail does not fully attach to the end post. It sits in the middle somehow. AND that end post sits halfway off the stringer.
AutoCad 3D :: Make 3D Spiral Stair Stringer
Jan 21, 2008How do i make a spiral stair stringer in 3d? what commands do i use?
View 9 Replies View RelatedAutoCad 3D :: Winding Stair Stringer - Sweep Command Options
Dec 27, 2011I need to SWEEP the yellow rectangle in this drawing along the magenta 3DPOLYLINE. This is a stair stringer for a winding stair I'm trying to model. The trouble is that when I SWEEP it the rectangle begins to rotate and ends up all out of whack once it gets to the top.
As I understand it, this is something that AutoCAD does not handle well and something like 3DsMax does. Problem is I don't have 3Ds Max and if I recall correctly there is a way to do this within AutoCAD. I just don't understand the SWEEP command options well enough. I've tried setting Align to No and Twist to the 270° that this thing runs, but each time I end up with the stringer rotated out of place.
Revit :: How To Make Railing And Stringer Run Continuous And Smooth
May 24, 2012Why am I getting this kind of railing and stringer? How do i make the railing and stringer run continuous and smooth?
View 3 Replies View RelatedRevit :: Monolithic Stair U-shaped
Jul 10, 2013I have made a stair by sketch, an u-shaped one. I do have some problems with the 3d model. it will not show up correctly. I add some print screens and you can see.
View 3 Replies View RelatedRevit :: Stair Section Cut Material
Apr 3, 2012I can't get Revit to display the cut material of a stair (landing or run) in 2013 using the new stairs... i have tried different settings in object styles, visibility/graphics, materials, details levels, phasing all without success.
Successfully show material cut pattern on a stair in section?
In the attached i have the new "Component" stair next to the old style "By Sketch" stair, the sketch stair shows the cut pattern the component one does not, this is the same section view not two sections.
Revit :: Stair Text UP Not Showing
Aug 11, 2013my Stair label text "UP" in my stair.In my properties browser its already checked but still didn't showed up.Anything i need to set?
View 1 Replies View RelatedRevit :: Distance To Make A Stair Case
Mar 25, 2013I have a client that needed to know the distance required to make a stair case, and when I drew it wight revit 2013, I discovered that I could manually adjust the riser height but was unable to adjust the tread length. I was also unable to end the stairs with a tread rather than a riser, witch he wanted.
View 1 Replies View RelatedRevit :: Adding Top Landing To External Stair?
Mar 22, 2012I am having a problem adding a top landing to an external staircase. see below image.
Every time i try and add the top landing i either get boundary error messages or railings surround top landing.
Revit :: Reporting Parameter For Stair Pitch
Jul 25, 2013Is it possible to create a Stair Tag with the pitch reported? I have a tag which includes the number and height of rises as well as the size of treads but I would like to include the pitch also. Obviously this would use the dimensions of the rise and tread in the formula Tan X = Rise/Tread, but how do I create this in a tag? I have looked at using a Reporting Parameter but every time I read the Wikihelp paragraph on them my eyes just glaze over as I cannot follow it at all but it does mention formulas....
View 8 Replies View RelatedRevit :: Bringing New Stair Family Into Template?
Feb 22, 2013Just Starting with new Revit LT 2013(The Comparison chart from Autodesk lists the differences between LT and Full Revit as no Massing, Rendering and no multi user collaboration) Everything else should be the same!
I'm using 'LT_USI_Residential-Default' Template for my project.In the Stair Family, I have a few options, but not the '7"max riser 11" tread' stair that is available in other Templates.Is there a way to bring that Stair Family into the Template?
Maybe I don't know the 'workarounds', but none of the Stairs available in the above Template have changeable 'width' parameter under 'Dimensions' in the properties window.No matter what I do, all Stairs are first drawn 4' wide, and then I have to edit the width, but it's a pain since I get bunch of error messages and Landings often can't complete and needed to be manually added later.Even though the Type Properties list all stairs widths as 3' min., they still all draw as 4'.What's wrong with these Stairs?
Revit :: Monolithic Stair With Missing Tread?
Jan 31, 2012experiencing monolithic stair with top tread missing - see attached image. The plan has irregular treads and I did pull the top riser line away from the boundary intersection but it had not affect.Or is this just a "feature"
View 3 Replies View RelatedRevit :: Making Bottom Of Stair Flat Instead Of Steps?
Sep 19, 2011How can I make the bottom of stair to flat instead of steps?
View 5 Replies View RelatedRevit :: Stair Tread Number Missing In Printing?
Jun 11, 2013Stair tread number tool is wonderful. BUT it is being not printed properly.
Example image attached:
- 'on screen' on the left is taken from my screen. The numbers are shown correctly.
- 'after print' in the middle is a black&white pdf print by adobe pdf. you can see there is the last number missing.
- 'after print-random number missing' on the right is a coloured pdf print also by adobe pdf. several numbers are missing and it happened randomly.
Revit :: Stair By Sketch Default Props Settings
May 20, 2013Is the any way of saving settings for in particular base level and top level. Always defaults to the current view level for base - can this be overriden permanently. Same for upper level - what lvel does it automatically default. Stair by sketch often involves trial and error and redoing it each time because once done you cant change the levels, rise, width or change the number of segments governed by the path. It would be nice to not have to reset levels each time.
View 1 Replies View RelatedRevit :: Change Elevation Of Cut Line For Individual Stair
Mar 11, 2010Is there a way to change the elevation of the cut line for an individual stair without changing the cut line for the entire view? The only way I know change the cut line is thru View Properties > View Range > Cut Plane.
View 7 Replies View RelatedRevit :: How To Show Sequential Numbers On Steps Of Stair
Nov 6, 2012How to show the sequential numbers on the steps of stair?
I’m wondering if there is a way to show the sequential number on the steps of stair.
Also, we are all the time required to write the number of stairs, run length and rise length on the drawing. Is this possible in the Revit?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Revit :: Monolithic Stair - How To Display Only Concrete In Plan View
Apr 23, 2012I use all the time L shape and U shape winder stairs in combination with the Monolithic Type.
We use to concrete the monolithic part of the stairs and then dress the stairs with treads and risers. The new tool looks that working very nice.
So OK I draw the U shape winder stair and of course i want to construct the stairs.
I want to prepape a detail plan view with dimensions only for the Monolithic Part (Concrete) of the stair but i can't find a way to dispay only the monolithic part without Treads and Riser.It is possible in 3d view but no in plan view. The news tool that calculate winder stairs is "half job done" if i can't print with dimension the concrete part of the winder stairs.
Revit :: How To Calculate Volume Of Concrete To Pour A Cast In Place Spiral Stair
Dec 3, 2013if this is easy, but how do I calculate the volume of concrete needed to pour a cast-in-place spiral stair?
View 1 Replies View RelatedRevit :: Why Stair Type That Works In Default Template Stuffed When Copied To Own Template
Jul 2, 2012I have a problem where I am unsure if my upgraded template is incompatible with Revit 2013 or is there something else at play.
If I create a precast stair in default template I get "end with riser" turned on automaticaly. If I copy that stair to my template and create new stair, "end with riser" is turned off and I manually have to adjust stair afterwards.
Problem is "end with riser" is now an instance parameter of stairs and I can't find where to change the default value.
Why is the stair type that works in default template stuffed when copied to my template?
AutoCad :: Make Partial Open (saddled) And Partial Box (housed) Stringer?
May 16, 2013how to make a partial open (saddled) and partial box (housed) stringer?
The only difference is that the open treads do not extend but are the same length as the box treads.Partial_Open_into_Box_Stair.gif Using Autocad Architecture 2012.
Photoshop :: Extended CS5 To Extended CS6 Cloud Install - How To Migrate Plugins
Aug 30, 2012Currently I am running PhotoShop extended CS5, 64bit. in which i have my fovorite plugins (Topaz, Nik and OneOne) running perfectly.
I have upgraded to Adobe Creative Cloud and installed PhotoShop extended CS6 using Adobe Application Manager as recommended. It didn't ask me if I wanted to upgrade or do a new install for PhotoShop. So now I CS6 running with no Plug-ins. I need my plugins! LOL.
I tried pointing to additional plugins in the CS6 preference to the CS5 plugin folder. Upon Launch it gave me a whole slew of error messages saying something cant load or launch C+ runtime error or what not. It does open up, but it only gives access to Nik and Topaz. OnOne doesn't show up under filters or extensions.
So, what are my options?
Just copy the plugins from CS5 to CS6?
I dont't want to reinstall all the plugins to CS6 if I don't have to as I've auto updated them over time to current versions online, so only have installation files for my original purchases.
AutoCAD Architecture :: One Stair For Multiple Levels
Mar 25, 2013I have a building with 2 levels & I have one stairwell. My 2 levels are in a shell.dwg - (first floor level & second floor level). I have a simple stair & landing, which is an element. I insert that element into the first floor level. Everything is fine there, but when I set up a view drawing with the shell (construct) & stair (element in construct) for the second level the stair is diplayed as if it is going up from the first floor level - I need it to show going down from the second floor level. Is there way to show that with one stair?
What we have done in the past is to not have levels, 1 construct for first floor & another for second floor - creating a stair styles for each floor. But when you do a model you have stairs on top of each other (not really using the software like we should). So my question is how do I have 1 stair for 2 different levels & show it correctly for each level. When I set my cut-plane height for first floor level - looks great, but when I set it second floor level - either it remains the same obviously or when I uncheck the override display config. in other on the display tab in the style the stair disappears. I'm trying a new way of creating models/plans & I can't think on how to create the stairs correctly. What am I missing in order to look correctly in plan view without making 2 stairs.
AutoCAD Architecture :: Adjusting A Wall Under A Stair
Oct 21, 2013I'm just trying to put a wall under a stair and it seems like I can not succeed. Already tried with interference, body modifiers and trimming.
View 2 Replies View RelatedAutoCad 3D :: How To Slice Spiral Stair As Per Section
Sep 29, 2013slice the spiral stair as per the section.
test.dwg
Photoshop :: CS5 / Screen Redraw Stair-stepping / Artifacts?
Oct 15, 2012I have been a long time Photoshop user and am having screen redraw problems since I have purchased a new system. I did not have this problem on my Macbook Pro which was hooked up to the same monitor.
Problem is: When I open a file in CS5 (12.0) and move the image around screen Its not redrawing smoothly. There is some stair-stepping artifacting going on. Its not lagging....just creating some stair-stepping like artifacting.
If I open the same file in "Preview" (version 6.0) and recreate the same image movement there are no problems.
System is :
Mac OS mountain lion 8.0
Mac Pro 3.2 Quad core (5,1)
Monitor NEC PA271W (W/spectraview)
GPU is ATI Raedon 5770
Monitor to Mac connection is DVI to DVI
AutoCAD Architecture :: Stair Landing Width And Extension
May 3, 2013how I keep the three risers shown in the image below, but extend the landings on the first and third run to avoid creating the angled corners. The angled corners show up when I manually edit the edges to bring the second run width down to match the first and third run width.
If I extend the landings, it tends to push one of the second run risers around the corner to the third run, and that screws up my design.
AutoCAD Architecture :: Stair Not Displaying In Sheet File
Nov 12, 2012I have set up a view with a stair that goes from the first floor to the second floor. The stair has been asigned to the first floor level only. It appears as I want it in the view. However, when I drag the view into my sheet file, the stair disappears and only the path shows, without the individual nosings.
View 1 Replies View RelatedAutoCad 3D :: Sweep Spiral Stair Channel Shape Along Spline?
Jul 3, 2011I am once again trying to get the hang of drawing a 3D spiral staircase and cannot seem to figure out the SWEEP command properly. I have a channel, or a rectangular tube shape which I want to use for the stringers. If I use a round tube, like when I do the handrail, there is no trouble. But when I use a channel or rectangular tube shape the SWEEP command causes the shape to bank and I end up with an unuseable shape.
In the attached drawing (ACAD-2007 format) I have shown a SPLINE which indicates the path I want the outside stringer to follow.