It seems the Sharpen effect in Premiere Pro CC is not 32-bit, however based on this [URL] , it should not affect the colors. Can we get a confirmation that indeed applying this effect on a 4:2:2 10bit ProRes project will not crush the bit-depth of the colors?
View 1 RepliesI've been noticing this behaviour in CC 7.1.
When you place "Sharpen" and some third party plugin (Sapphire, NewBlue, BorisFX, ...) the 1 pixel wide rectangle starts to appear around the frame. Is it a bug?
For whatever reason(s), after applying the 'Depth of Field' effect, the cloning tool no longer works properly. If I open another image, the tool works just fine but if I return to the image where the 'Depth of Field' was applied, the 'clone' no longer stays after the mouse button is released. That is, the effect seems to be temporarily applied under the brush and immediately disappears when the brush is moved or the mouse button is released?
View 3 Replies View RelatedI'm new to this board and would like to know the question about how to make a photo that is reduced to besmooth and sharpen, actually sort of digital filter effect like imagemagick can do. I need that for resizing adult images and made them to be attractive not rough.
actually I have bulk actions when I'm doing this procedure and only do these things: reduce image from example around 900x600 to 180x120 and then I just do filter - sharpen - sharpen.It's nothing special comparing to this photo
What is the difference between sharpen and sharpen copy in the presets section of LR? they seem to have the same effect, dont know which one to use
View 2 Replies View RelatedI noticed when I lay a track in the timeline now with version 7.2.2 it is much darker and more dim than in 7.2.1. See picture attached.
I thought this could have been a new feature but I went into the preference pane and the preference pane label section has the same bright colors as in 7.2.1. I even screen captured the preference pane colors and the timeline colors in version 7.2.2, and they are way off. Timeline is much darker and more dim tehn selected preference color.
I'm trying to color match two shots and I'd like to be able to view them side by side while I adjust the colors in one of the shots. It seems like a good way to do this would be to view two program monitors side by side - but is that possible? I can't see that option anywhere.
Using the source monitor for comparison doesn't make sense to me as I've already color corrected the reference shot and the source monitor shows the original footage (ie. the wrong colors). I could of course try to match the shots based on the source footage of the reference shot and then apply a second color correction but that seems a bit unnecessary to me.
Or - I remember that in FCP7 there is an option to use split screen while color correcting two view two shots simulatenously side by side in the same screen/monitor. Is there anything like that hidden in PPro?
I have adjusted the scale and position in my edit but the result is not smooth. I am using a still image and I want to zoom out and pan on the image. I have set a key frame at the beginning and one at the end of the desired time. for some reason it starts zooming out very slowly and it picks up in speed towards the end.
View 3 Replies View RelatedStarted using premier pro I have imported some video and all looks fine but when you hover cursor over the video it plays the video with a gradient map effect even though an effect has not been added. when you place video into the timetime the video preview playes with this effect also but when I have exported video the video is exported as normal without this effect.
View 2 Replies View RelatedI just came over from Sony Vegas Pro 9 (which kicks ***, but has bad native support for DSLR files).
In Vegas you can apply effects to video in three ways:
1. A whole clip in the project media bin (automatically applying such effects to all timeline events using this clip).
2. Individual timeline events.
3. Entire video tracks (automatically applying such effects to every clip on the track).
Is this possible in Premiere CS5? I find it hard to believe that it's not possible since it is such a useful thing to do. For example, what if you have a bunch of footage that you want to look grainy but you don't want to apply the same effect to every timeline event from the clips because it is time consuming and creates many sources of change if you want to tweak the effect settings?
I want to add a skip frame effect to my video. Which tool should I use?!
View 2 Replies View RelatedI am using the Bloc Theme from YooThemes for my webpage (check it out at YooThemes for reference)
I'm looking to fill in 3 colors with three colors that I have designed myself - I used the eyedropper to pick up colors from other files and tried to fill the shapes. No matter what I've done - even using the pen tool to close in the shape the fill goes all over the whole page. When I fill in the colors how can I also keep the 3-D effect?
I edit a ton of parties with cross dissolves on most cuts. Being able to see the waveform in effect controls and match the bass kick or snare would save me hours of time and hundreds of key strokes.
View 1 Replies View RelatedI was trying to learn about naming colors. I named a color, only to find it was now in my default color palette, which was now 'Untitled1'. I did not want to have the default palette that opens on the Color Line when I open the program changed and requiring me to rename it every time I named a color. I tried to undo my actions but had only partial success. The new named color is gone, but the color palette is still 'Untitled1', and how to restore the palette name. How can I correct this?
View 9 Replies View RelatedI am trying to achieve this type of affect, a 2 colour on a photo. But I cant seem to find the filter to get it right.
View 2 Replies View RelatedProblem zoom, when visionage and exporting my videos, they are zoomed while I put the original video settings. However when I put break in the previsualisage video, it returns to its normal size. How do I get it retains its original size and delete this zoom effect ?
View 8 Replies View Relatedits a cross country picture of some kids on bleachers and i wanted to add some affects to it. one was just to make it look lke half the picture was underwater and the view was from above.
i wanted the water level to go up to the front rows knees or chest and have reflections and ripple filters just as a normal picture with water in it would have. im not sure quite how to do this though.
i want to enable the mental ray extensions for my lights but i am currently using the design viz - mental ray UI, if i were to switch it to the max - mentalray UI, will i loose my tool paletes that i created in the previous UI? is there a way to get the mental ray extensions without switching the UI?
View 1 Replies View RelatedI've just recently started to use the 3d function on Photoshop cs5 with text. But is there a way so the light on one layer affects other layers instead of having to redo the light for all layers?
View 6 Replies View RelatedI am trying to use the camera to zooom into one layer. the front layer should not be affected by that - so how can I make the camera only affect ONE layer not all?
View 3 Replies View RelatedI am trying to darken/sharpen a .PDF scan of an old blueprint drawing using the Curves tool, but the drawing only appears edited in the preview screen and reverts back to its original appearance once I hit OK. What do I need to do to get the changes to stay?
View 3 Replies View RelatedI once created this image, I am not quite sure how i achieve the blur affect on the fonts. I rememebr when i saved it, "indexed color" poped up, I chose something from the drop-down list,and found the words changed...seems pretty nice, so I saved it. I thought i remebered every step, but now I followed the steps i remember, i just couldn't get this anymore..
View 2 Replies View RelatedI’m using 3dMax 201 64 bit.I made kind of a robotic arm and I linked parts together. Then I changed the Pivot on each pieces of the arms.My problem is that sometimes the change I have made on with “Affect Pivot Only” doesn’t apply.I can see the gizmo of the Affect Pivot but the one that works is the original one. I don’t know why it keeps the old pivot active when I changed it. Sometimes, I click on “Affect pivot only” button and the good pivot comes back active. But doesn’t work every time.
How do I make the good pivot active?
I created a straight line using the shift,click method. Now nothing I do will affect it. When it failed to be made invisible by toggling the layer I thought I created it in I systematically went through each layer in the image, turning them visible, invisible in case I lost track of where it was created, but even though those layers became visible/invisible as they should, nothing happened to the line. I tried to create a layer above it to just cover it up, but even though the new layer was on top, the line showed through. Although this line used to be needed it is now essentially a blight on the rest of my image, which is massive. I dread the idea of having to start from scratch. I can't simply erase it because it doesn't seem to be associated with a layer. Originally, the image was created in 2.6, I think (but am not sure) that this is the version I used to make the line, but when I got a new computer I downloaded 2.8, and after this discovered the problem. Everything else works normally, is responsive,etc
View 2 Replies View RelatedI am trying to resize the artboard so it will be an exact size in pixels. However whenever I use the artboard tool, the contextual toolbar will show me the size in mm. I went to Preference > Units > General and while it appears to be set to show pixels, it doesn't seem to affect the artboard measurements.
View 2 Replies View RelatedI am, using Ai (CS6). I've produced a poster I'm fairly happy with, but black background is affecting red and green type on top of the black...
Possibly one hint towards a solution is that I have one photo with a transparency and the lettering that is on top of that transparency isn't affected by the black background.
The transparency was started by creating a cut-out of a mugshot in Ps CS6, using the magnetic tool, previously creating a transparent background layer.
Anyway, the long and the short is, if a tiff photo transparent background can keep out the black background, how can I create a transparent layer with similar properties.
Just trying to work out how to have one camera affect the view of all the 3D layers in my scene. If I have a layer selected, and adjust the camera, it only affects that layer.
View 1 Replies View RelatedI need to create a smoke affect over a picture. It needs to be transparent. I've tried a few approaches but my brain is having fits trying to figure it out. Google has drawn blanks.
View 3 Replies View RelatedI'm making a video slideshow for my friend's wedding and I'm trying to use some overlay pics in a couple segments but want the overlay track to dissolve with the main track and can't get it to work for some reason. Specifically I'm trying to make a remote control pop into the bride's hand (I'm using "Grow Old With You" for one of the songs and thought it would be cute during the "even let you hold the remote control" part). Anyway I went through the trouble of creating the remote control object etc. but even though I can drag a transition to the object it doesn't seem to affect it any. Instead it affects the main track.
Here's what happens specifically...I have dissolve applied to both the main track picture (the bride) and the remote control (overlay track)...and the dissolves are set to trigger at the same time. The bride starts to fade but the remote control stays solidly on the screen - and then something weird happens, the object transition effect seems to overwhelm the main transition for a second and the whole screen flicks black for a second and then abruptly goes on to the next slide. If I delete the object transition effect the abrupt black screen thing doesn't happen but the remote control obviously doesn't fade either, which makes the video seem very amateurish. I checked all the edit settings for both the main and overlay tracks and nothing seems to work with this. I can't believe a glitch like this could have existed for this long without Corel fixing it...Right?
I think i may have a 'major' problem, when i do a detach skin, the skeleton is ok but the skin changes size and direction as well as place, i think it's because i resized after the first bind skin, now i'm trying to reset bindpose but doesn't seem to affect the skin, i need to fix this so bad and i feel like i'm between a rock and a hard place, is there a way out of this mesh?
View 1 Replies View RelatedHere to reproduce the bug :apply cfx to a clip. Open cfx and add any fx , for example in my test , i use blur. I then right click the blur node and choose 'create cfx'. I select the cfx and render it. exit cfx to timeline. In timeline i copy/paste or duplicate the clip. So now we have 2 identical clip. Bring the duplicate to the desktop and right click and choose flush render. Now the problem that the flush render, i expect, won't affect the master (original) file. But in fact , it will wipe out the render inside the original clip. Now open the original cfx clip and inspect that the cfx node has lost the render file. This is pretty serious problem. In complex cfx, we can accidentally delete render file and need to spend 'expensive' time to re-render.
View 6 Replies View Related