I've just recently started to use the 3d function on Photoshop cs5 with text. But is there a way so the light on one layer affects other layers instead of having to redo the light for all layers?
View 6 Replies
Just trying to work out how to have one camera affect the view of all the 3D layers in my scene. If I have a layer selected, and adjust the camera, it only affects that layer.
View 1 Replies View RelatedI have two layers. One is completely red (r255,g0,b0). The other layer is completely green (r0,g255,b0).
How can I make it so that if I lower the opacity of the green layer (which is above the red layer), to 50% that the result is completely yellow (r255,g255,b0)?
I've tried all the blending options, none of them achieve this basic effect. The closest I got was something that looked like a darker orange.
Have a drawing that contains about 200 layers. When I open the layer dialog box, about 50 of the layers are highlighted in light blue. The layers appear to behave normally. Why they are highlighted?
View 5 Replies View RelatedI am trying to animate a casino-like light board made of tens of light bulbs/leds. I thought the easiest way to do it would be creating a matrix of bulbs arranged by material ID and then design a pattern in multi sub-object materiel so I could somehow scrub through it and achieve animation effect. The material modifier allows to change ID for the whole object only and MaterialByElement shuffle ID`s in a random manner.
[URL]
I am attempting to build a facsimilie enigma machine, I would like to know how best to create an effect so that when a key is pressed a corresponding letter appears to light up. Btw I am not looking for an animated image, I can take care of the transitions between on and off, I just need to create the two image states.
Attached Thumbnails
How do you lock the pivot point of a light to the light itself? I thought just adding a Axis node would move the light and pivot point but the pivot does not move. Is there a way of parenting them together?
View 2 Replies View Relatedits a cross country picture of some kids on bleachers and i wanted to add some affects to it. one was just to make it look lke half the picture was underwater and the view was from above.
i wanted the water level to go up to the front rows knees or chest and have reflections and ripple filters just as a normal picture with water in it would have. im not sure quite how to do this though.
How do I use the standard Revit can lights in a wood joist floor with drywall applied to the bottom? If I place in a suspended ceiling, can lights light up just fine. However, if I use them in the floor space of a wood joist floor, the light itself gets covered with the floor. How can I get the light to cut the floor out so I can see the light when it is rendered?
View 4 Replies View RelatedI am trying to darken/sharpen a .PDF scan of an old blueprint drawing using the Curves tool, but the drawing only appears edited in the preview screen and reverts back to its original appearance once I hit OK. What do I need to do to get the changes to stay?
View 3 Replies View RelatedI once created this image, I am not quite sure how i achieve the blur affect on the fonts. I rememebr when i saved it, "indexed color" poped up, I chose something from the drop-down list,and found the words changed...seems pretty nice, so I saved it. I thought i remebered every step, but now I followed the steps i remember, i just couldn't get this anymore..
View 2 Replies View RelatedFor whatever reason(s), after applying the 'Depth of Field' effect, the cloning tool no longer works properly. If I open another image, the tool works just fine but if I return to the image where the 'Depth of Field' was applied, the 'clone' no longer stays after the mouse button is released. That is, the effect seems to be temporarily applied under the brush and immediately disappears when the brush is moved or the mouse button is released?
View 3 Replies View Relatedi want to enable the mental ray extensions for my lights but i am currently using the design viz - mental ray UI, if i were to switch it to the max - mentalray UI, will i loose my tool paletes that i created in the previous UI? is there a way to get the mental ray extensions without switching the UI?
View 1 Replies View RelatedI am trying to use the camera to zooom into one layer. the front layer should not be affected by that - so how can I make the camera only affect ONE layer not all?
View 3 Replies View RelatedI’m using 3dMax 201 64 bit.I made kind of a robotic arm and I linked parts together. Then I changed the Pivot on each pieces of the arms.My problem is that sometimes the change I have made on with “Affect Pivot Only” doesn’t apply.I can see the gizmo of the Affect Pivot but the one that works is the original one. I don’t know why it keeps the old pivot active when I changed it. Sometimes, I click on “Affect pivot only” button and the good pivot comes back active. But doesn’t work every time.
How do I make the good pivot active?
I created a straight line using the shift,click method. Now nothing I do will affect it. When it failed to be made invisible by toggling the layer I thought I created it in I systematically went through each layer in the image, turning them visible, invisible in case I lost track of where it was created, but even though those layers became visible/invisible as they should, nothing happened to the line. I tried to create a layer above it to just cover it up, but even though the new layer was on top, the line showed through. Although this line used to be needed it is now essentially a blight on the rest of my image, which is massive. I dread the idea of having to start from scratch. I can't simply erase it because it doesn't seem to be associated with a layer. Originally, the image was created in 2.6, I think (but am not sure) that this is the version I used to make the line, but when I got a new computer I downloaded 2.8, and after this discovered the problem. Everything else works normally, is responsive,etc
View 2 Replies View RelatedI am trying to resize the artboard so it will be an exact size in pixels. However whenever I use the artboard tool, the contextual toolbar will show me the size in mm. I went to Preference > Units > General and while it appears to be set to show pixels, it doesn't seem to affect the artboard measurements.
View 2 Replies View RelatedI am, using Ai (CS6). I've produced a poster I'm fairly happy with, but black background is affecting red and green type on top of the black...
Possibly one hint towards a solution is that I have one photo with a transparency and the lettering that is on top of that transparency isn't affected by the black background.
The transparency was started by creating a cut-out of a mugshot in Ps CS6, using the magnetic tool, previously creating a transparent background layer.
Anyway, the long and the short is, if a tiff photo transparent background can keep out the black background, how can I create a transparent layer with similar properties.
It seems the Sharpen effect in Premiere Pro CC is not 32-bit, however based on this [URL] , it should not affect the colors. Can we get a confirmation that indeed applying this effect on a 4:2:2 10bit ProRes project will not crush the bit-depth of the colors?
View 1 Replies View RelatedI need to create a smoke affect over a picture. It needs to be transparent. I've tried a few approaches but my brain is having fits trying to figure it out. Google has drawn blanks.
View 3 Replies View RelatedI'm making a video slideshow for my friend's wedding and I'm trying to use some overlay pics in a couple segments but want the overlay track to dissolve with the main track and can't get it to work for some reason. Specifically I'm trying to make a remote control pop into the bride's hand (I'm using "Grow Old With You" for one of the songs and thought it would be cute during the "even let you hold the remote control" part). Anyway I went through the trouble of creating the remote control object etc. but even though I can drag a transition to the object it doesn't seem to affect it any. Instead it affects the main track.
Here's what happens specifically...I have dissolve applied to both the main track picture (the bride) and the remote control (overlay track)...and the dissolves are set to trigger at the same time. The bride starts to fade but the remote control stays solidly on the screen - and then something weird happens, the object transition effect seems to overwhelm the main transition for a second and the whole screen flicks black for a second and then abruptly goes on to the next slide. If I delete the object transition effect the abrupt black screen thing doesn't happen but the remote control obviously doesn't fade either, which makes the video seem very amateurish. I checked all the edit settings for both the main and overlay tracks and nothing seems to work with this. I can't believe a glitch like this could have existed for this long without Corel fixing it...Right?
I think i may have a 'major' problem, when i do a detach skin, the skeleton is ok but the skin changes size and direction as well as place, i think it's because i resized after the first bind skin, now i'm trying to reset bindpose but doesn't seem to affect the skin, i need to fix this so bad and i feel like i'm between a rock and a hard place, is there a way out of this mesh?
View 1 Replies View RelatedHere to reproduce the bug :apply cfx to a clip. Open cfx and add any fx , for example in my test , i use blur. I then right click the blur node and choose 'create cfx'. I select the cfx and render it. exit cfx to timeline. In timeline i copy/paste or duplicate the clip. So now we have 2 identical clip. Bring the duplicate to the desktop and right click and choose flush render. Now the problem that the flush render, i expect, won't affect the master (original) file. But in fact , it will wipe out the render inside the original clip. Now open the original cfx clip and inspect that the cfx node has lost the render file. This is pretty serious problem. In complex cfx, we can accidentally delete render file and need to spend 'expensive' time to re-render.
View 6 Replies View RelatedI have an .idw of an assembly. I originally made a sub assembly invisible in the .iam and create a new base view. The invisible assembly is not there as I would expect. If I turn the visisbility back on in the .iam the part is now visible in the .idw even thogh I have cleared the "Associtave" box. No matter what I do, I can't clear the assembly out of the .idw even if I go back to the .iam and make it invisible again. This used to work in previous releases.
Atuodesk Inverntor 2011
I have access to a Map of a town. I would like to isolate a certain area of the town and make it bigger on the same page. But not let it link together, that way I can get some demensions in, delete some lines and texts which will not effect the overall map itself. I would just solely like to manipulate the blown up portion.
View 1 Replies View RelatedI have recently put Auto Cad 2012 on my laptop, but seems to be very slow. While doing this fusion inventor also downloaded.I was wondering could I remove Inventor as I don't use it, without that effecting my auto cad program? All I do is just basic 2D drawings on autocad and need to speed it up. Could I also remove Autodesk 2012 libary?
View 3 Replies View RelatedI created a straight line using the shift,click method. Now nothing I do will affect it. When it failed to be made invisible by toggling the layer I thought I created it in I systematically went through each layer in the image, turning them visible, invisible in case I lost track of where it was created, but even though those layers became visible/invisible as they should, nothing happened to the line. I tried to create a layer above it to just cover it up, but even though the new layer was on top, the line showed through. Although this line used to be needed it is now essentially a blight on the rest of my image, which is massive. I dread the idea of having to start from scratch. I can't simply erase it because it doesn't seem to be associated with a layer. Originally, the image was created in 2.6, I think (but am not sure) that this is the version I used to make the line, but when I got a new computer I downloaded 2.8, and after this discovered the problem. Everything else works normally, is responsive,etc
View 1 Replies View RelatedI change the reference point in the transform panel to the lower left corner and scale a shape down, however, it does not seem to make a difference when scaling the square. What exactly is it doing?
View 5 Replies View RelatedI have designed something in Illustrator at 5x7in i want to export this as a PNG to keep its transpareny and its going to be used on a website, however exporting this as it is at 72ppi just isnt clear enough. Is it possible to export this as a PNG at 300ppi but keep the original pixel density?
View 1 Replies View Relatedi have made changes to folder structure in lightroom 4. basically condensed folders, merged, deleted, etc. the only corresponding changes that i can see when i look at folders in My Pictures on my mac is that some of the folders are deleted. otherwise all the folders look the same as before i made my changes.
View 12 Replies View RelatedI'm trying to make a dynamic block with attribute text. I've made a FLIP action to it but the text will not follow.
In the Command Window i get this text
Select objects: Specify opposite corner: 16 found
Select objects: 6 unlocked AttDefs filtered from selection.
