Photoshop :: Fill In Three Colors With 3D Effect
May 2, 2012
I am using the Bloc Theme from YooThemes for my webpage (check it out at YooThemes for reference)
I'm looking to fill in 3 colors with three colors that I have designed myself - I used the eyedropper to pick up colors from other files and tried to fill the shapes. No matter what I've done - even using the pen tool to close in the shape the fill goes all over the whole page. When I fill in the colors how can I also keep the 3-D effect?
View 1 Replies
ADVERTISEMENT
Apr 3, 2012
CDX5: Whatever color I select for fill or outline is now set as the default color for fills and outlines without expressly setting it as such. Until now when I left or right click a color with nothing selected it allowed me to set it as a default fill or outline color for graphics, artistic text, or paragraph text. It does not do that now.
Is this a "feature" that's been added that I somehow enabled? In any event, how do I turn it off?
View 2 Replies
View Related
Apr 25, 2013
I have a transparent logo. I've conferted it to RGB and tried using fill (it's primarily a single color except for some fading at the edges) but the results were not 100%. Rather than using Fill and leaving some scruff around the edges, can I just tell it to change ALL image bigs to a single color? How?
I am new at Photoshop.
View 4 Replies
View Related
Nov 17, 2011
I have been using Adobe since CS3, now using CS5. Why is there still no way to have the color swatches FILL the panel.
I rarely use more than, say, 8 to 12 colors in a document. Why can't I set the Adobe products (I mostly use Ps, Id, and Il) so that the swatches panel has no blank space. I would like to have the colors will fill the entire space with LARGER tiles/icons. I find it very frustrating to have to click on a micro-sized square to pick a color. Or, try to discern small changes in the shade between 2 colors by squinting at such a small sample (again micro-sized square).
View 2 Replies
View Related
Feb 1, 2013
I want to use photoshop elements to alter drawings so they look like quilts. I want to import fabric scans as fill colors and patterns. Is this possible?
View 4 Replies
View Related
Feb 2, 2007
Say i have filled an area with Gradient fill and i open up the Gradient editor to refine the gradient, i realize that i cannot 'live' preview how the tuning affects the gradient in the object.
This can be achieve in Illustrator CS2 from gradient palette. i was wondering can it be done in Photoshop Cs2 with any shortcut or so?
(i was thinking any other way to achieve that without using Gradient overlay , Layer style? because i want to create several objects with differnt Gradients on the same layer)
Else, are there any external plugin/script to achive that?
---
Secondly, is there any command to align anchor points in PS? like align them vertically or something, i notice there is no paths palette in Ps( where are the commands to manage anchor points located at)?
View 5 Replies
View Related
Jul 18, 2012
Is there an option or a workaround that will eliminate the white boarders in a Corel trace? Whenever I do a trace, when I move the trace off the top of the original image, I see a white boarder around each color. Is there any way - when tracing - to tell Corel to use the fill color as the border color for each element of the trace?This would make the trace immediately usable without hand selecting each color cell.
View 8 Replies
View Related
Feb 29, 2012
I've got an object that I've filled with a circular fill/gradient. Is there a button that allows me to swap the start color and end colors in one click? If this was a linear gradient I could just position the start and end points to reverse it but since its circular I must swap the start and end to retain the circular effect.
View 6 Replies
View Related
Mar 5, 2014
I'd like to make it easier for our 100,000 designers to use AI to make custom products using a laser cutter.
Current Practice
Designers open our AI laser cutting design templates, add their designs using the AI settings our online pricing system can read, then upload their designs to our website for instant pricing, making and shipping.
The Problem
Designers have to manually setup AI with settings that can be read by our online pricing system. If they get these settings wrong, our system can not read their designs. So they are rejected and can not be priced or made. This happens more often that you'd imagine.
The Solution
Designers do not like design rejections. So I'd like to eradicate them by providing our designers with a version of AI that provides the following settings only:
* Set document to RGB
* Stroke weight = 0.01mm
* Stroke colors = RGB 0, 0, 255 and 255, 0, 0
* Fill color = RGB 0, 0, 0
This will mean designers have a very limited number of AI choices, with nothing to distract them or to get wrong. Which will result in less (or zero?) design rejections. And products made faster than before. Rejoice!
Question
How do we program our AI laser cutting design templates so that when they are opened in AI, they auto set AI settings as defined above?
View 14 Replies
View Related
Nov 11, 2012
I need to automatically create all the possible pattern combinations with 6 shapes and 6 colors.
I have an Excell file with assigned color combinations (values from 1 to 6) in the rows, and the shape name (A to F) in the columns. Column 7 is a string containin the color combination names (i.d. 123456, 123345 etc...) so that I can output each combination with the color/numbers in the name.
I'd like Illustrator to pick every row and assign the contained colors to each shape of the column and to export a .png with the name from column 7 content.
Just simple as that! But to me it sounds pretty hard!
Is there a script that makes it already posted somewhere? - i couldn't find any - or something simliar to start coding from?
View 8 Replies
View Related
Feb 17, 2013
I'm having a lot of trouble understanding how Adobe Illustrator (CS6) manages character styles imported from different ai documents. If I create all character styles in a single .ai document and only use them in in that document, everything works as expected--colors, fonts, and typography settings are maintained in the character style, and newly added text can be quickly styled with the character style.
My trouble starts when i want to re-use those character styles in a new .ai document. From the character style menu I use the option to import the character styles from another document, and they import correctly--all of the styles work and style text as expected. But then i save & close the document and re-open it to find that the character style entries are there, but the fills and strokes are all messed up--fonts, sizes, typography settings are maintained, but styles with a blue fill are suddenly filed with black, or some other color.
This happens even if the swatches associated with the character styles are imported to the new document as well. I've read that all character styles are based off of the 'normal' character style.
View 22 Replies
View Related
May 15, 2012
In all my previous programs I have managed to change the default to no fill effect in a vector shape, the default in X6 is a fill effect even though there is no colour so as long as the shape is on top you can click anywhere and it is picked. I can't find where to change this to empty space.
I am sure it must be in front of me but I just can't find it!
View 6 Replies
View Related
Jan 14, 2012
not being able to change colors of an object while using the Interactive Fill Tool? That is, change an existing color or add/delect a color to the gradient. I have to delect and reselect the object to change colors. I have to do this each and every time want to make a color change. Without this functionality I am not sure what the point of the tool is.
View 14 Replies
View Related
Mar 19, 2011
i want to make a fill effect from a color to transparent and could not find any solution in xara designer; how do you do it??
see attachment made with fireworks
View 6 Replies
View Related
Dec 17, 2010
I have a PNG logo that has anti-aliased letters on a transparent background. In other words, all pixels are white (for example) and either 0% transparent (in the letters) or semi-transparent (in the anti-aliasing). The rest of the image is transparent.
What I'm trying to do is take change the color of the logo. Bucket fill in normal mode changes the alpha value of the semi-transparent pixels to 0% transparent when applying the color--so I loose the anti-aliasing. I did manage to get what I want with bucket fill mode Darken only, but this only works for certain colors on certain other colors (I can change white to any other color, but not vice versa).
Is there a straightforward way to fill a color while keeping the alpha channel intact? I tried all the modes, and also modifying the Fill transparent areas, but don't really understand them to figure out if one does this in the general case.
View 12 Replies
View Related
Feb 16, 2014
How can I draw a continuous stroked line with a fill, so that it overlaps and covers the previously drawn part of the line? I'm trying to draw some text so that it has an effect like in fig. 2 of the attached picture, not fig. 1. Is it possible to make somehow? For a simple image like this I could of course manually remove the few lines, but for a more complex text it's not possible, and I can't seem to find a solution myself.
View 7 Replies
View Related
Apr 16, 2014
It seems the Sharpen effect in Premiere Pro CC is not 32-bit, however based on this [URL] , it should not affect the colors. Can we get a confirmation that indeed applying this effect on a 4:2:2 10bit ProRes project will not crush the bit-depth of the colors?
View 1 Replies
View Related
Nov 29, 2011
I was trying to learn about naming colors. I named a color, only to find it was now in my default color palette, which was now 'Untitled1'. I did not want to have the default palette that opens on the Color Line when I open the program changed and requiring me to rename it every time I named a color. I tried to undo my actions but had only partial success. The new named color is gone, but the color palette is still 'Untitled1', and how to restore the palette name. How can I correct this?
View 9 Replies
View Related
Jul 5, 2013
I am trying to achieve this type of affect, a 2 colour on a photo. But I cant seem to find the filter to get it right.
View 2 Replies
View Related
Jun 5, 2012
1. First question: I need to apply Mesh Fill effect to a circular vector (ring) which was built with the Combine command (Ctrl + L), but Mesh Fill is not allowed for objects combined. Is there any alternative for this?
2. Second question: How to make that mesh nodes has the circular shape of the figure (in this case, a ring)?(By clicking on the object, it creates a mesh grid and edit the nodes to obtain a circular form is very laborious and the result is not satisfactory).
View 7 Replies
View Related
Jul 8, 2013
An Area Text Object is created...
the Transform Effect is applied to it (a rotation).
The text rotates, but the fill disappears...
whether it's the original object or if copies are added.
View 4 Replies
View Related
Jul 24, 2013
I'm thinking that once the perspective tool is enable the starting/ending coordinates of the fountain fill should lock relative to the shape. What ya think?
As a work around you can position the to be perspective guide shape so the starting/ending coordinates of the fountain fill at least fall close?
cs_setInnerHtml('video_5c40a7a1-4b00-4e4c-aca5-47f306588bdd','');
View 3 Replies
View Related
Sep 12, 2013
How do I get it so that when I draw a shape it will fill with color? In my options bar there is a rectangle with color where I can choose that, but sometimes that's not up. How do I pull it up?
How do I fill a canvas with color without having to cover it with a large rectangle to fill? I've gotten answers to this but none has solved the problem.
View 3 Replies
View Related
Jul 16, 2013
When I use the fill tool to simply 'fill' a selection, it does not completely fill it. There is an ivisible barrier or line that prevents it from filling all the way to the edge. Do you think I have my settings wrong?
View 2 Replies
View Related
Jun 28, 2012
I recently installed CS5 on my laptop after first removing it from my previous machine.All licences were validated so no problems there.Now when using paint bucket in Photoshop, the colors that I select in the color picker are not the colors that result when I use the paint bucket.
If I create a new black canvas then the colors selected in color picker work with paint bucket.But if I attempt to recolor the background in an existing image that I import into Photoshop, I get the mismatch with colors when I use paint bucket. My method for selecting colors is the same in each case, I select 'set foreground color' and set the color using html values entry at the bottom of the panel.
View 11 Replies
View Related
Jul 7, 2013
Just wanted to print a new photo and realized that the colors in print preview do not match the colors in soft proofing. In both cases I selected the same icc profile and rendering method. The print colors matched the colors in print preview. I never had a problem so far. All new prints will be checked with soft proofing and adjusted when necessary. I never paid attention to the color rendition in print preview and all prints perfectly matched the colors from the soft proofing. I was surprised when my print came out of the printer and the colors weren't matching the soft proofing colors, but that of the print preview.
I don't understand why Photoshop renders the colors differently in the first place. See attached screenshot for the difference in the blue/cyan colors. I don't care if the print view colors will match the print, but I do care when soft proofing is not working.
View 2 Replies
View Related
Sep 7, 2013
Okay, so it's been a while since I've done one of these, and I haven't done one on 2014 at all yet.
I've got a fairly simple part, it's about 6" long x 3" wide, less than 3/8" thick, without a whole lot of complex geometry to work with. I've built up my whole mold for it, and that went okay, but the fill analysis seems like it's taking forever. Like hours. It gets to the "Fill" stage, gets just a sliver of green on the progress bar, and then sits.
Last time I tried this was on my workstation at the office, using 2013. It didn't take nearly this long, and the part was much larger and far more complex, with a significantly slower computer.
Is something broken with this in 2014? I guess I can just let it run overnight, see what happens in the morning ...
Product Design Suite Ultimate 2013, 2014
Autodesk Inventor 2013
Work: Dell Precision T1600 (Xeon E3-1280 / 16GB / 512 GB SSD / 250 GB (Internal) / 1 TB (External) / Quadro 600)
Home: i7-4770k / ASUS Z87-Pro / 16GB / 250 GB SSD / 1 TB HDD / 3 TB USB3 HDD / 2xRadeonHD 4870 in CrossfireX
Laptop: Toshiba Satellite P755-S5269 (i7-2630QM / 8 GB / 250 GB SSD / 750 GB HDD / GT540M)
View 9 Replies
View Related
Dec 17, 2012
see xcf attachment...
I used a heart fill pattern of the right 75% of the picture and the left 75% of the picture is selected overlapping the first fill in the background... I want to fill the selected background area with a flame fill pattern where it overlaps the selected portion of the heart pattern as well as the transparent area... 'overlay' looks better but Gimp is FAILING to fill the transparent areas, it ONLY fills the overlapped heart pattern portion of the selected content!!! I even tried filling the transparent area with 'white' then filling the selected area, but it STILL ONLY wants to overlay fill the heart pattern, it STILL leaves the rest alone!!! it doesn't matter if the background is white or transparent, it leaves that alone and ONLY fills the heart pattern area of selected portion of the image!!!
View 3 Replies
View Related
Apr 23, 2012
In Corel PhotoPaint X5, changing the fill color was possible by e.g. double clicking the (left-most) color square, then hitting Edit. Already, I found this was a bit too many clicks. Now in Corel PhotoPaint X6 it's gotten worse -- after hitting Edit, I'm not in the left-most tab "Models", but in the right tab "Palettes"!
My question: Is there any way I can open the Uniform Fill dialog with one click? (The Color Docker doesn't have a big color preview field so it doesn't work well for me when selecting and changing a color.) And is there any chance Corel will fix the bug with the wrong tab being opened?
View 1 Replies
View Related
Feb 17, 2013
I traced an image earlier, expanded it then wanted to change the line colour. For some reason I couldn't get this to work even though I've done it in the past. So, I used the magic wand to select the line then dragged it into my new document and changed the line colour.
Now, I want to change the fill on certain sections, however when I change the stroke it changes the colour of the line and when I change the fill it changes the color of the line.
View 4 Replies
View Related
Jan 6, 2004
The colors of pictures is much darker when working in photoshop than when I open it normally. And vice versa, I work on images inside photoshop, and I get the colors I want, but once I save it to bmp or jpg or anything else, all the colors are much lighter.
i'm using photoshop 7.
View 3 Replies
View Related
