Premiere Pro :: SG Direct Link Causes Crash And Corrupt Project
Dec 20, 2013
I'm running Mac OS 10.8.2, PPro 7.1.0, SG 7.2.
After applying a simple Primary grade in Direct linked SG project, saving and sending back to PPro causes PPro to crash and render the following error:
[/morereel64/releases/2013.09/shared/adobe/MediaCore/MediaLayer/Import erHost/Make/Mac/../../Src/Audio/AudioWaveform.cpp-173]
Then I get a "serious error" dialog and it shuts down.
Re opening the PPro project causes crash after the splash screen.
Opening any other PPro project, direct linking to SG, grading, and returning it to PPro causes this behavior.
This first happened after adding a mask. All transport controls froze, although I could still grade the frame I was stuck on. I saved and sent it back to PPro, and that was the first time PPro crashed. That project is now corrupted and crashes after the splash screen.
Now any direct link to SG causes a crash on return to PPro, and permanently corrupts the project.
View 5 Replies
ADVERTISEMENT
Jan 23, 2014
There is a new command in Premiere Pro: direct link to speedgrade. What change is meant by the choice of new wording, from "send to" to "direct link"? Is there a dynamic link now between Premiere and Speedgrade? I haven't seen anything to that effect in "What's new."
View 2 Replies
View Related
Jul 19, 2013
Every single premiere cc project file I have including my auto-save prj files will not load. I get the error message "The Project Appears to be Damaged, it can not be opened". This is for all my Premiere CC Projects. I have uninstalled and reinstalled Premiere with no avail. Is there anything I can do in order to salvage these corrupt files and the work/effort associated with them?
View 32 Replies
View Related
Jan 20, 2014
Premiere was running fine for most of the weekend, then began to crash every time I tried to open the project. Other projects open briefly, followed by a crash within 5 minutes.
Most recent error:
Problem signature:
Problem Event Name: BEX64
Application Name: Adobe Premiere Pro.exe
Application Version: 7.2.1.4
Application Timestamp: 52aed7f3
Fault Module Name: StackHash_1dc2
[code]...
View 8 Replies
View Related
Mar 19, 2014
When I open my project the media associated with the project shows that it is loading in the lower left hand corner of the program. It gets to about 123 files left to load and then it stops. I then have to attempt to locate all the rest of files with the Link Media tool this works for a few files and then it stops responding. What is the problem and how do I keep my project linked to its media assets?
AE dynamic linked assets
AVCHD video shot on C100
I have cleared the media cache
Media is stored on a 8TB Raid 10 NAS connected with a Gigabit router. The NAS is on my desk connected directly to my computer through the router.
View 3 Replies
View Related
Sep 16, 2013
I have an SSA model that has multiple on-grade inlets along a city street. Each on-grade inlet has a roadway/gutter bypass link defined (the link is defined as 'direct' in the conveyance link properties) and where applicable an upstream roadway link. Therefore most inlets have a direct link coming in and a direct link leaving to represent the gutter bypass flows. The model will successfully run under kinematic wave routing method. When changed to hydrodynamic, I get Error 134 stating:
ERROR 134 : Node CB-13 has more than one DIRECT outlet link or DESIGN pump.
I know that it is fairly self explanatory error except the error does not appear for every inlet that I have defined direct links for. Some inlets that have one incoming direct link and one outgoing direct link are not listed in the error listing, while some do. In review of the model, I do not appear to have multiple direct outlet links (I also don't recall drawing more than one per structure in my model). Based on my review of SSA documents, it seemed like modeling bypass flows using direct links as opposed to open channel flow was the most common practice. That said, if I change the outgoing direct link to open channel, that inlet is removed from the error list.
Version:2014 Civil 3D
View 2 Replies
View Related
Jan 13, 2014
I want to take a sequence that I had in an old project and put it into a current project, but I dont want it to be one rendered file... i still want too see the fades and make changes to it...
View 5 Replies
View Related
Jan 2, 2014
i´m having a problem opening a premiere pro cs6 project from another computer. My partner can open the project in her computer, but when she sends me the project by mail and i try to open it in my computer i I get t the mesasage " Cannot load project". I´ve tried importing the project into another project but it doesn´t work.
View 2 Replies
View Related
May 2, 2012
I tried twice to close a project (in VS PRO X3) but the program stuck and a message appear (you can see it in the attached file).
View 1 Replies
View Related
Apr 15, 2014
I recently lost 11 days on a documentary project due to Premiere's crashes, instability and refusing to launch (including almost 6 hours of Adobe tech support in India remote controlling my iMac, trying in vain to fix the issues).
I decided to give Premiere another try today, thinking Premiere's problems might have been related to the Canon XF300 used on the documentary project. Would I have better luck with different media?
I planned a very simple project: different camera (8 clips shot on Panasonic GH3, in the 72 Mbit All-I MOV mode), different media (2 AIFF audio files).
I made a fresh project, and imported the GH3 clips from the media browser. When I tried to import the 2 AIFF files, Premiere crashed.
Now I can’t even get Premiere to launch, despite rebooting and trashing every cache and Adobe preference I can find (user application support, user preferences, and ~/documents/Adobe). This happens with or without plugins in the Mediacore folder (I use all of Red Giant's plugins and quite a few of FXFactory's).
Are there any other secrets to get Premiere to launch? Now that I am locked into the CC subscription, I would like to at least have a program that can launch.
I hate to be negative, but my experience with Premiere has been absolutely horrible (and costly). And every other Mac-based editor I know who has tried Premiere CC is reporting the same instability. Especially for us television editors, stability is FAR more important than new features.
quad iMac 3.4 GHz, AMD Radeon HD 6970M 2GB, 20GB RAM, MacOS 10.9.2 Mavericks, Premiere 7.2.2
View 5 Replies
View Related
Mar 28, 2014
When rendering footage in the latest version of premier pro on MAC OS X 10.9.2 no matter what sequence or timeline I am in, premier keeps crashing every time I try and do anything. I have plenty of memory on a brand new MAC computer but it continues to just crash.
View 4 Replies
View Related
Mar 11, 2014
I'm seeing Premiere Pro CC (7.2.1) constantly crash with a few projects when I try to export. The common thread (as I can see) are that they were all started in earlier versions of Premiere.
I'll finish editing, then hit Ctrl-M (or Export -> Media), and Premiere sits idle for a moment, then it crashes. Importing the project sequence in AME allows for encode though.
Checking the event viewer in Windows turns up that the ntdll.dll might have something to do with it.
Here's some of the information I saw:
Faulting application name: Adobe Premiere Pro.exe, version: 7.2.1.4, time stamp: 0x52aed7f3
Faulting module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24
Exception code: 0xc0000005
Fault offset: 0x000000000002dc00
Faulting process id: 0xd24
Faulting application start time: 0x01cf3d541b80d4ea
Faulting application path: C:Program FilesAdobeAdobe Premiere Pro CCAdobe Premiere Pro.exe
Faulting module path: C:WindowsSYSTEM32
tdll.dll
Report Id: 8896833a-a947-11e3-be31-78acc03d0b2e
and this was from another crash just moments before the one above:
Faulting application name: Adobe Premiere Pro.exe, version: 7.2.1.4, time stamp: 0x52aed7f3
Faulting module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24
Exception code: 0xc0000005
Fault offset: 0x000000000002dc00
Faulting process id: 0x223c
Faulting application start time: 0x01cf3d50f11ab58e
Faulting application path: C:Program FilesAdobeAdobe Premiere Pro CCAdobe Premiere Pro.exe
Faulting module path: C:WindowsSYSTEM32
tdll.dll
Report Id: 18856ec7-a947-11e3-be31-78acc03d0b2e
System info - Wondows 7 SP1, HPz800 workstation
View 2 Replies
View Related
Jan 15, 2014
I have Adobe Premier Pro CC on a laptop windows 8.1.
I can open the software without problem but when i want to create a new projet, open a projet, import media (all actions which needed to use the window's browser) the soft crash and a "adobe premiere pro has stopped working" pop up appears.
I have the follow report in "C:ProgramDataMicrosoftWindowsWERReportArchiveAppCrash_Adobe PremiereP_c3d8aff034e6134d452e86f0b46eb49124ae68d4_bdc6adc1_9321fcde Report.wer" is attached
View 2 Replies
View Related
Jan 20, 2014
I have noticed that since upgrading to CC I have had lots of time wasting work around to create a Blu Ray and DVD using Encore. In the past I used to create awesome quality Blu Rays and DVD from the same Encore Project dynamically linked to PrPro. But with CC the workaround is time consuming and I don't think the Blu Ray and DVD will be going away as predicted by Adobe. As a result of this I just can't wait to terminate my CC subscription at the end of my contract this year so I can revert to CS6.
View 6 Replies
View Related
Oct 28, 2013
I got a support contact a customer due to delay in opening some certain designs. The client works with a single project file to all your machines projects, being:
- 1 path in WorkSpace
- 1 path in WorkGroup
- 1 path in Content Center
After some testing I noticed that the drawings that had some missing file and fix the broken link needed had the problem of delay in opening. (9min for appears the resolve link screen) (simple drawing with 1view of the model inserted)
So I did a simple test.
Define a new project, the existing Default.ipj. And open the same file. To our surprise, the screen Resolve Link quickly appeared (30sec), quite different from the other project used.
My opinion of this delay, the current project, contains over 1million files easily. And as in the case of an Inventor file lost link searches for the file in the paths defined in the project, eventually causes loss of time behind files.
Before course, I also performed the same test on file with the option "Defer Update" and even then there was a delay(7min) in opening the file.
This visibly clear that, when using a project with a workspace without files, and open a file Inventor does not do research, trying to find substitutes for the file.
My question is:
The Defer Update should not simply ignore the model file and do not make the search, just opening the file? And also
Is there any way to set a file IPJ, with any paths in Work Groups, and Inventor, not to make a search for the file in other locations, just as it existed previously, and display the screen Resolve Link?
View 5 Replies
View Related
Dec 28, 2013
I read the FAQ on files not importing but am afraid I am having a weird problem.I converted my canon's .mov files to several types :avi,mpeg, and mp4, but they still cause PP to crash every time I try to drag the imported file into the source panel.
I am running HP on Intel Core i7 2630 QM CPU with 6 gig RAM and 64 bit Windows 7.
Deets on the AVI file that caused the crash:
data rate 20000kbps
fps 29
1920x1080
lenth 56 seconds file size 97.7 mb
View 10 Replies
View Related
Jan 7, 2014
I have had premiere fail to open for a while now on one of my secondary PC's. This computer was setup with a network drive as its disk cache/links to projects. This is so multiple editors can work off the same RAID. Works perfectly, aside from the fact that windows somehow unlinked the network drive. Once this happened premiere fails to launch and crashes when starting the program.
I had got the network drive linked back up at one point and premiere launched again running with zero problems. Again windows messed up the network drive, and premiere again, does not work.
I need to reset the settings for premiere (the disk cache settings).
THINGS I'VE ALREADY TRIED: I already tried holding Ctrl + Shift to reset, did not work. I already tried uninstalling and reinstalling, but the settings were not removed and program keeps crashing.
I would just relink the network drive and then once premiere launches change the disk cache and never do that again, but sadly the computer will not relink to that partical drive.
I'm running windows 8, latest version of CC (just updated). I have 32gig Ram, I7 processor overclocked to 4.4GHz, Nvidia Graphics.
View 1 Replies
View Related
Jan 29, 2014
when selecting a simple clip on Premiere CC timeline and selecting 'Replace with After Effects composition', from Adobe Dynamic Link, AE CC launches, creates a new (empty) comp but does not import the footage clip into the project
View 7 Replies
View Related
Feb 3, 2014
I select an audio clip in timeline to open it in Source Window.
I try to change the IN POINT from inside the Source Window and I crash. Every time.
Then I click CONTINUE and get this:
I am running PPCC 7.2.2 (4) on a MacPro with 10.8.5 installed.
View 6 Replies
View Related
Jan 10, 2014
I used Dynamic Link to import an AE comp into Premiere Pro - for some reason the white background has turned into a completely transparent background.
View 8 Replies
View Related
Mar 4, 2014
I have a very short sequence without errors in premiere pro, but when I drag the project over to Adobe Media Encoder, I get a "Dynamic Link Error"...
"There was an error when adding selected sequence to the batch".
Currently I have to export sequences one at a time, and that's not going to be cool in the near future.
Premiere pro 6.0.5
Adobe media encoder 6.0.1.31
View 1 Replies
View Related
Jan 19, 2014
how to properly link my footage on my timeline to color corrected files from film convert. I know how to do it to each individual clip at a time, but when I select a whole folder, it always relinks the media to it's original destination and not the new destination with the color corrected files. What's the correct way to link multiple clips to new source files?
View 13 Replies
View Related
May 29, 2013
We are copying our original files to a sub folder to make revisions that have only happened after bidding. We want to keep our original bid documents intact. I have created a sub folder called 'Conformed Documents' and added Constructs, Sheets, Elements, ect.
I copied the files over and used the Reference Manager to repath the files. However, all of my schedules and room tags now use the 'NA' prefix because it is not reading the project information. How can i reconnect this folder to the project folder?
View 1 Replies
View Related
Apr 15, 2014
I have tried exporting in various ways, it will burn to a dvd, but one way wouldn't play sound, another only play on my MAC, another played through media player but not on a dvd player. I looked it up and it says something about Encore. Is that something I have already? If so, how do I access it?
View 3 Replies
View Related
Dec 30, 2013
I've made a project in Premiere Pro CS6 with greenscreen footage from a canon XF100 (MXF file).
When I open the project in Premiere Pro CC I can scrub throught the timeline everything is oke.
But playing or rendering the timeline, gives me only the bottom half of the greescreen footage. I see that in Premiere CC the clip with the footage becomes gray after putting an effect on it. When I do this process from the start in CC it works fine. But there are 52 timelines in the project made in CS6.
View 4 Replies
View Related
Feb 12, 2014
I tried to export my project. I don't know where it was exported to. I did not see where I could choose the destination. I ultimately want to save it on my google drive.
View 5 Replies
View Related
Feb 13, 2014
I am using Premiere Pro CC, up to date, on Windows 7 Pro 64 bit. After week's vacation opened large project to find all clips offline. When I linked, they located fine but OK produce "the importer reported a generic error". I know the clips are on their hard drives and have not changed position. I am not sure of next step. I have always been able to link before though have not used "locate" dialogue box. Checking other projects reveals consistent problem with importer.
View 1 Replies
View Related
Apr 13, 2014
Is there a limit to the number of sequences I can have in a PPCC project?
View 1 Replies
View Related
Jan 18, 2014
I am on the final stages of finishing my first ever HD project, having made the jump Premiere Pro 2.0 to Premiere CS5. Mid-way thru I found it necessary to upgrade to Creative Cloud, so that is where I am working now. The HD world is so vastly different from the old SD flow that every single step of this project has been a huge learning curve for me. I am basically an 'oldie' but for all practical purposes I am a total 'newbie' at this. That said, I am now finding myself ready to export my project to DVD in a SD form with Stereo sound.
I am working with footage shot on the Red Epic. At my current stage I am working withh ProRes 444 renders from which I have created a full nested 74 minute timeline. Frame rate is 23.976 and the source is1920x1080 with 1.0 square pixels.
So now my movie is done, and it looks and sounds like I want it to. The question now, in a nutshell, is what file type and settings should I use to export my movie so that I can retain aspect ratio? Should I output a movie first or take the project into another program like encore first and make my disc from there?
Also, I have my first screening coming up (primarily for cast and crew and industry insiders) in a couple of weeks, so I need to create a 1080 HD File with my 5.1 surround track that I project from a laptop. The screening venue has the capability to do that via a simple HDMI cable hookup, but does the laptop I use need to have any special capabilities to do the job? And what is the best file type to use for that?
I have always been more of an artist than a tech head, but I am pretty much doing the whole post on this movie alone, with the exception of the Dissolve renders and the sound design, which I had done for me (I have a great finished 5.1 design in .wav format, as well as a stereo version).
I should also mention that I currently have Encore CS5. Can I work with this on a Premiere CC project?
View 5 Replies
View Related
Feb 10, 2013
The project weight is almost 2 GB.Is taking hours open my project file. I have to send a edit by tomorrow but right now I don't know if I will be able to open my project to start editing.
I have read in your forums this is a common bug but nobody say how can be solved, I already lost all day waiting and I can't be waiting all night to start the editing at early morning, this is totally insane. I'm editing in a Macbook Pro Retina with 16 GB of RAM.
I edited a lot in this computer with this software version ( CS6 ) and never got this problem.
In this project are sequences with Magic Bullet effects and Warp Stabilizer but this can't be an excuse, must be a solution for this because I already lost 8 hours looking to my screen.
View 7 Replies
View Related
Dec 26, 2013
I'm running Adobe Premiere Pro CC on a 2011 Macbook Pro, and I was working on a project. When I went to render the whole sequence, Premiere froze and auto quit. When I went to open the project again, I got the error:
"This Project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type."
Every version of the project's auto-save files gave the same error. I tried all of the suggested tips like deactivation and clean uninstall, but nothing's changed.
Will taking the project to another computer work?
View 4 Replies
View Related
