when selecting a simple clip on Premiere CC timeline and selecting 'Replace with After Effects composition', from Adobe Dynamic Link, AE CC launches, creates a new (empty) comp but does not import the footage clip into the project
View 7 RepliesI have a very short sequence without errors in premiere pro, but when I drag the project over to Adobe Media Encoder, I get a "Dynamic Link Error"...
"There was an error when adding selected sequence to the batch".
Currently I have to export sequences one at a time, and that's not going to be cool in the near future.
Premiere pro 6.0.5
Adobe media encoder 6.0.1.31
I have noticed that since upgrading to CC I have had lots of time wasting work around to create a Blu Ray and DVD using Encore. In the past I used to create awesome quality Blu Rays and DVD from the same Encore Project dynamically linked to PrPro. But with CC the workaround is time consuming and I don't think the Blu Ray and DVD will be going away as predicted by Adobe. As a result of this I just can't wait to terminate my CC subscription at the end of my contract this year so I can revert to CS6.
View 6 Replies View RelatedI used Dynamic Link to import an AE comp into Premiere Pro - for some reason the white background has turned into a completely transparent background.
View 8 Replies View RelatedI'm attempting to create a dynamic link from PR to AE (both CC) by right clicking on the desired clip in my PR sequnce and selecting "Replace with AE Comp". Doing so properly launches AE, asks me to save the AE project, and creates a comp with the correct parameters (duration, frame rate, size, etc) with the desired comp name. The sequence in PR shows the linked comp with the correct comp name. However, in both AE and PR the video clip is simply black. In my understanding of Dynamic Link, the original files (clips) should be sent over to the AE project. In my case, I only see the project with no associated files. Is there a trick (or a known reason) why the files would not be transpored to the AE project?
View 7 Replies View RelatedI am using Premiere Pro CC, up to date, on Windows 7 Pro 64 bit. After week's vacation opened large project to find all clips offline. When I linked, they located fine but OK produce "the importer reported a generic error". I know the clips are on their hard drives and have not changed position. I am not sure of next step. I have always been able to link before though have not used "locate" dialogue box. Checking other projects reveals consistent problem with importer.
View 1 Replies View RelatedI've just installed PS CS6 Extended 32 and 64 bit versions 13.0.1 on a new PC running Windows 7.
If I try to open a video I get an error message:
When I click Continue I get this:
And finally this ...
When loading a music file into CS6 I get an error message "Could not complete your request because Dynamic-Link is not available" I have just load this program and want to do some video work?
View 3 Replies View RelatedWhenever I attempt to render video or export a photoshop file as a video I get the following error:
dynamiclinkmediaserver has encountered an error
[/Volumes/BuildDisk/builds/DynamicLinkMediaServer1/main/shared/adobe/M ediaCore/ASL/Foundation/Make/Mac/../../Src/DirectoryRegistry.cpp-283]
Continue Button.
Hitting continue does nothing and the application just hangs on the video export progress bar.I've attempted to export several types of PSD files to video, some old, some new (made in CS6) and I always get this error. I have reset Photoshops preferences. I have uninstalled the entire CS6 suite and reinstalled it.
On a whim I decided to reinstall PS CS5 and try to export from there. Worked like a charm. Was able to export video from my PSDs like before.I am currently running:
Creative Suite CS6 Master Collection
My hardware is:
Model Name: iMac
Processor Name: Intel Core i5
Processor Speed: 2.8 GHz
Memory: 8 GB
Mac OS X Lion 10.7.3
Just tried to import file sinto a brand new LR Catalog when I got this message...here's the entire error message: "An unknown error has occurred while reading the video file. Connecting to Dynamic Link server failed. (98)" Connecting to Dynamic Link Server Failed
this was then followed by a list of files of these types:
.mov
.m4v
.3gp
I have been using PS for about 2 moinths. The program has developed a fault that reads
The procedure entry point ister WindowMessage could not be located in the dynamic link library USER32.dll.
I have tried uninstalling and re-installing but to no avail,
Using PS CS on XP with SP2 installed. Program was working fine.
So I've done a reasonable amount of work with dynamic blocks. I have a block with a rotation action and grip to arbitrarily align it. However I realized when trying to combine it with an alignment grip (which actions on the basic or fundamental block rotation angle) that there didn't seem to be a way to some how link a dynamic block rotation action or one of the custom angle properties to a the fundamental block rotation angle. Thus there are two additive rotations at work; the dynamic block one with its grip and the fundamental rotation property.
This can cause some confusion when one person aligns with the grip and another via rotating the block's fundamental property and would also be problematic in the generalized sense if one was trying to select or programmatically read back the net angle alignment.
There is a new command in Premiere Pro: direct link to speedgrade. What change is meant by the choice of new wording, from "send to" to "direct link"? Is there a dynamic link now between Premiere and Speedgrade? I haven't seen anything to that effect in "What's new."
View 2 Replies View RelatedIn CS6, I am working a Premiere project, but I want to make a title in After Effects. So I have a title in AE dynamically linked to Premiere. Now, I want to bring the Premiere sequence into AE to work out some timing issues, but encountered an error (5027 ::12). What specifically does that error mean? Are we not able to round trip between AE and Premiere?
View 15 Replies View RelatedI'm currently using AE and PP CS6 with Dynamic Link and rendering out in Media Encoder is very slow. I am not using my computers full power, only about 25% CPU and half of ram. What other components could speed this up? SSD? Rendering on GPU?
View 1 Replies View RelatedI'm running Mac OS 10.8.2, PPro 7.1.0, SG 7.2.
After applying a simple Primary grade in Direct linked SG project, saving and sending back to PPro causes PPro to crash and render the following error:
[/morereel64/releases/2013.09/shared/adobe/MediaCore/MediaLayer/Import erHost/Make/Mac/../../Src/Audio/AudioWaveform.cpp-173]
Then I get a "serious error" dialog and it shuts down.
Re opening the PPro project causes crash after the splash screen.
Opening any other PPro project, direct linking to SG, grading, and returning it to PPro causes this behavior.
This first happened after adding a mask. All transport controls froze, although I could still grade the frame I was stuck on. I saved and sent it back to PPro, and that was the first time PPro crashed. That project is now corrupted and crashes after the splash screen.
Now any direct link to SG causes a crash on return to PPro, and permanently corrupts the project.
When I open my project the media associated with the project shows that it is loading in the lower left hand corner of the program. It gets to about 123 files left to load and then it stops. I then have to attempt to locate all the rest of files with the Link Media tool this works for a few files and then it stops responding. What is the problem and how do I keep my project linked to its media assets?
AE dynamic linked assets
AVCHD video shot on C100
I have cleared the media cache
Media is stored on a 8TB Raid 10 NAS connected with a Gigabit router. The NAS is on my desk connected directly to my computer through the router.
how to properly link my footage on my timeline to color corrected files from film convert. I know how to do it to each individual clip at a time, but when I select a whole folder, it always relinks the media to it's original destination and not the new destination with the color corrected files. What's the correct way to link multiple clips to new source files?
View 13 Replies View RelatedI have a problem with this patch. When a I try to click on File/Import/Video Frames To Layers there's an error "DynamicLink Media Server is not available". I try to wait 30 second and restart the program and my pc, but there have been no changes.I also updated the patch downloaded from the website version 1.01
I saw that others have had this problem, but I have not figured out how they did to solve it. I'm Italian and I understand little about your language so.
I'm trying to import video frames to layers, but it keeps saying that the dynamiclink isn't available! And I have a windows 8 laptop.
View 1 Replies View RelatedThis is the message that pops up after I try to import video frames to layers. I've looked everywhere for some sort of solution to this problem. I've tried closing the program, waiting for about a minute and re-opening it multiple times, I've tried restarting my computer, I've tried disabling my firewall, I've tried using Bridge, and I've tried just about every other option that has been given to others who have reported this same issue. None of it has worked for me.give me a clear answer as to what I could possibly do to fix this problem that I haven't already tried.
View 3 Replies View RelatedIt may have to do with the update to 14.1.1 but suddenly when I try to open a video file the above warning appears.
Windows 7 64bit
B.T.W., is there a way to repair a CC application installation?
I'm using Photoshop CS6 and I keep getting this error while trying to import video frames to layers
I've looked around and tried the recommended steps offered on other threads. When I reboot my laptop it works again for maybe five minutes but the moment I try to import another video it doesn't work. If I close the program, wait 30 seconds, and try again I get the error message again. When I try opening Bridge the whole program freezes.
I have two stretch parameters on a dynamic block. How can I link them together? For example if the user stretch one them the other automatically stretches accordingly. I assume 'Parameter Manager' is the key.
View 7 Replies View Relatedif it's possible to link a rotation with a stretching action. I have a text (or an attribute) inside a box that can be stretched. But if the box becomes too small to hold the text horizontally, I would like that the text automatically rotate vertically without any other action that stretching the box. If that is possible, is it also possible that instead of a text, there's an attribute, and that it rotates according to the attribute's length ?
View 9 Replies View RelatedI need to create a small table to ID the User, Computer name, Door Key, etc for a floor plan drawing of our office. I'd like to get this done in Excel and link it all so the bldg manager can make changes to the drawing without me. I have created the excel file and created a "name set" in excel for each room. In Autocad 2013 I have inserted a table from a data link and pointed that link to the named range of the room (the named range in excel is an 8 cel block with al the info I need repeated and uniquely named for each room.
This works great...so my next step is to create a block out of the table and make the DATA LINK a variable attribute...that's where I'm stuck. i cannot figure out how to do this. I would love to be able to INSERT BLOCK and have one attribute question...ROOM NUMBER?. That should look to the excel NAMED SET the corresponds and populate the table.
Is it possible to link a parameter value to a function? I want text or attributes to never be "upside down".
If it is rotated with a rotation parameter the text would need to be automatically flipped or rotated if the angle is less than say >3*PI / 4 and < 7*PI/8.
A Google search result just now showed me only 2 years of questions posed, with no Adobe Support Answers.
MacBookPro 2008
Mac Mavericks OS
LR v 5.3
Video was viewed in 2013 in LR 4, but after install of CC and LR 5, playback is not functioning.Tried restarting LR 5, the HDD dedicated catalog and exporting a test file. The above error message occurred while trying to reimport the test video (.avi) file.
While in grid view, when curser moves over the thumbnail, image seems to fast forward. After clicking twice on the thumbnail, there is no image in Loupe view. There is kind of a weird black, white and gray graphic.One attempt to start playback resulted in this error message in white text on a black banner, " There was an error working with the video."
When a video file is present in the library, camera card, or anywhere lightroom freezing and the dynamic link manager crashes. This also then causes lightroom to crash immediately. How do I fix a corrupted dynamic link manger?
View 5 Replies View RelatedI'm using a pc with windows 64 bit, and get this warning when trying to analyse the footage with either the 3D camera tracker or warp stabilizer. A warning pops up that says, unable to obtain dynamiclink server connection, and the footage does not analyse. The only solution is restarting my machine.. not very time saving.
Also similar issue, when I am working on a comp in AE and go to open the edit in premiere pro, premiere freezes and closes without opening.. only way to fix this is to either restart the machine, or have opened a premiere project before opening an AE comp.
I decided to download the trial version of Adobe After Effects CS6. I've been playing around with it and I've run into trouble. When I try to us the 3D Camera Tracker tool, I'm promptly greeted with an error that states, "unable to obtain dynamiclink server." This happens every single time I press the "analyze" button. It happens with every single clip I try to use (AVI, WMV, MP4, etc.) I've checked my firewall and virus protection (Kaspersky) and nothing is restraining anything in After Effects
View 6 Replies View Related