I've made a project in Premiere Pro CS6 with greenscreen footage from a canon XF100 (MXF file).
When I open the project in Premiere Pro CC I can scrub throught the timeline everything is oke.
But playing or rendering the timeline, gives me only the bottom half of the greescreen footage. I see that in Premiere CC the clip with the footage becomes gray after putting an effect on it. When I do this process from the start in CC it works fine. But there are 52 timelines in the project made in CS6.
When I import a short AVCHD or MPG (~ 1 min., 100 mb) into Premiere Pro CS6 or After Effects CS6, it plays great. When I import the same file into Photoshop CS6 on the same computer, it's jerky, even with sound off, frame skipping enabled, cached, and no other applications running.
System is a Core i7 with 8 gb RAM, 1.5 gb nVidia GeForce, Win 7 x64 and DirectX 11. All drivers ruthlessly updated.
I want to take a sequence that I had in an old project and put it into a current project, but I dont want it to be one rendered file... i still want too see the fades and make changes to it...
I have been creating a project for some time which contains a lot of video clips.Every now and then I position the 'scrubber' mid way along and click on the 'play' button to check what the effect is at the place I am editing.
Today after adding some more video clips to the end of the project and editing them when I place the 'scrubber' where the clips are that I have been editing and click on 'play' to see the effect instead of VS 'paying' my video from the position the scrubber was placed at it moves the scrubber to the start of the project and plays from the beginning. It was not doing that yesterday (I have added some more clips to the end of the project since then and editing them).This is VERY annoying as I cannot check to see what parts of the movie (project) look like without playing from the start of the project (30 minutes in length).
i´m having a problem opening a premiere pro cs6 project from another computer. My partner can open the project in her computer, but when she sends me the project by mail and i try to open it in my computer i I get t the mesasage " Cannot load project". I´ve tried importing the project into another project but it doesn´t work.
I can't get any audio to play while in Premiere Pro. The computer's programs has audio in the speakers and headphones with everything but Premiere, including exported premiere files but I'm not sure why. It was fine just two days ago.
I recently downloaded Premiere Pro through Creative Cloud and I have now made a video I wish to share with friends and family. The only trouble is, whenever I export it, the video saves and shows up in my folders but if I try to open it a notice comes up saying " Server execution failed". Why does this happen and how can I get my video to play on things such as Windows Media Player? I have used Premiere Pro at college many times before and all the exporting details looked fine but that didn't work and even when I made a few adjustments.
I just installed VideoStudio Pro x5. After creating a few clips, I go to play the project and the preview video image studders, and plays a clip here and there, but my music plays smooth.
I have all the hardware acceleration box's checked ( there's 3 of them ). I don't know what to do, I read this is the least demanding video editing program. I also meed the minimum system requirements?
I made a complex video clip from .avi files with Corel Videostudio Pro X3, I saved the project then moved my original files to different folder. After some time I decided I want to edit my video again and re-linked the files successfully but now when I try to play my project in edit mode it doesn't play smoothly, it stops and delays. I can't edit in such conditions because I can't preview my work... Before moving my files everything was fine. No changes were made to my computer...
I have a question about conforming material from Abode Premiere CS 5.5..I have a 720@50p source that was converted to Avid DNxHD 10bit 720@50p in Quicktime .mov container, using Media Encoder.Then material was edited in Premiere, cuts, dissolves and etc. Timeline in Premiere is set to 720@25p, because I need to output 720@25p finals.Premiere DOES NOT slowdown shots in timeline, it just plays them skipping every 2nd frame (I thinks so), so it is played in a normal speed and audio is in sync also. In Interpret footage settings nothin is changed - so, it still treats as 50p footage.
Problem is that I dont understand how to conform this footage correctly in Smoke.If I use automatic conform using wiretap import of AAF (same dir as footage is), Smoke thinking about this operation about 10-15 mins and then it creates a 1080@50p timeline where all shots are smaller it's native size and timing is completly wrong. They starts early than they should.If I use Video I/O I have correct sizing but timing issue is still present.
I need to create a project with PAL settings and override resolution to 720p?
How make Smoke to play footage same as Premiere does? Whithout shifting in out points?
I am using Premiere CC to edit Pro Res 422 in a sequence using the ARRI Cinema 23.976 sequence preset. My rough cut sequence has lost all audio playback. I can play audio from the source, and in other sequences in the same project but this sequence specifically is not giving my ANY playback. In audio hardware, I have set output to built-in output and made sure that my system is set to the same thing as well. When I click into channel properties, right click>Modify Channel I see 4 audio tracks set to Source Channel 1, 2, 3, 4. All are set as "Ch.1" under Channel in track.
A play icon insie a circle appears on the top right (semi-transparent, like a watermark) after I import the video and on the file that's exported. The original file doesn't have this so it must be an Adobe default? Does same thing in Media Encoder.
I purchased VideoStudio X5 for HD editing of .MTS clips from my Panasonic HS700 video camera. I transfer the clips to my hard drive using explorer and then use the X5 program to bring them into the library and then to the timeline. Due to my volume problem I re-downloaded VSX5, reinstalled it and installed SP1 patch, updated my Video Card Driver to the latest, updated Direct X and made sure my Microsoft Updates are all up to date.
My Volume problem is, during the editing proces you use both the Project playback and also individual clip playback. Without any manual changes to clip volume, when I play an individual clip the volume is substatially higher than when I play the project over the same clip area. This is annoying to me and those nearby. Earlier versions of VS did not do this.
If I change the individual clip volume up or down from 100% then when I play either the project or individual clip the volume remains the same (ie.it is no longer louder in clip mode).
I exported file in youtube preset 30 frames 1080p and when I try to play it, it is not playable. my windows player says it cant play the file. so I wonder what is going on
The files is 50 minutes long, I exported 10 minutes long video before and it plays just fine..I use gaming laptop msi gt70 for processeing the video
In Premiere Pro CC, if I have previously set an in and out point in my source monitor, the spacebar plays clips from the in point only. I'd rather be able to move my CTI to any place in my clip, hit spacebar, and play from there but it always snaps to the in point and plays from there.
The play around shortcut is a joke because it doesn't play from the playhead location and loops at seemingly random intervals.
I'm using Photoshop Elements 10 Organizer with Premiere Elements10 Installed. I have a number of files of type MTS which I understand to be AVCHD and are imported from my Panasonic Lumix TZ20 camera which captures HD video. These files will not play in the Organizer, resulting in a message stating the required Codec is missing. However, when the same file is sent to Premiere Elements for Editingand agreeing to a message to have Premiere set the correct properties for the media type it plays perfectly. What am I do wrong? Are there any settings I need to change to have Organizer also play the file successfully?
I have tried exporting in various ways, it will burn to a dvd, but one way wouldn't play sound, another only play on my MAC, another played through media player but not on a dvd player. I looked it up and it says something about Encore. Is that something I have already? If so, how do I access it?
I tried to export my project. I don't know where it was exported to. I did not see where I could choose the destination. I ultimately want to save it on my google drive.
I am on the final stages of finishing my first ever HD project, having made the jump Premiere Pro 2.0 to Premiere CS5. Mid-way thru I found it necessary to upgrade to Creative Cloud, so that is where I am working now. The HD world is so vastly different from the old SD flow that every single step of this project has been a huge learning curve for me. I am basically an 'oldie' but for all practical purposes I am a total 'newbie' at this. That said, I am now finding myself ready to export my project to DVD in a SD form with Stereo sound.
I am working with footage shot on the Red Epic. At my current stage I am working withh ProRes 444 renders from which I have created a full nested 74 minute timeline. Frame rate is 23.976 and the source is1920x1080 with 1.0 square pixels.
So now my movie is done, and it looks and sounds like I want it to. The question now, in a nutshell, is what file type and settings should I use to export my movie so that I can retain aspect ratio? Should I output a movie first or take the project into another program like encore first and make my disc from there?
Also, I have my first screening coming up (primarily for cast and crew and industry insiders) in a couple of weeks, so I need to create a 1080 HD File with my 5.1 surround track that I project from a laptop. The screening venue has the capability to do that via a simple HDMI cable hookup, but does the laptop I use need to have any special capabilities to do the job? And what is the best file type to use for that?
I have always been more of an artist than a tech head, but I am pretty much doing the whole post on this movie alone, with the exception of the Dissolve renders and the sound design, which I had done for me (I have a great finished 5.1 design in .wav format, as well as a stereo version).
I should also mention that I currently have Encore CS5. Can I work with this on a Premiere CC project?
Premiere was running fine for most of the weekend, then began to crash every time I tried to open the project. Other projects open briefly, followed by a crash within 5 minutes.
The project weight is almost 2 GB.Is taking hours open my project file. I have to send a edit by tomorrow but right now I don't know if I will be able to open my project to start editing.
I have read in your forums this is a common bug but nobody say how can be solved, I already lost all day waiting and I can't be waiting all night to start the editing at early morning, this is totally insane. I'm editing in a Macbook Pro Retina with 16 GB of RAM.
I edited a lot in this computer with this software version ( CS6 ) and never got this problem.
In this project are sequences with Magic Bullet effects and Warp Stabilizer but this can't be an excuse, must be a solution for this because I already lost 8 hours looking to my screen.
I'm running Adobe Premiere Pro CC on a 2011 Macbook Pro, and I was working on a project. When I went to render the whole sequence, Premiere froze and auto quit. When I went to open the project again, I got the error:
"This Project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type."
Every version of the project's auto-save files gave the same error. I tried all of the suggested tips like deactivation and clean uninstall, but nothing's changed.
Just finished editing a project and want to send it to someone without all the excess. I understand you go to the Project menu and select Project Manager. Only problem is I don't have a Project menu.
There is no Project Panel when I capture clips to Premiere Pro CC. There is only a Media Browser so how do I create a Project Panel if there is not one already?
It used to be that whenever i would move the cursor in adobe premier with either the left or right arrows or by simply clicking and dragging it, it would play the audio from that frame. But it is not doing it anymore, I think i must have accidently hit a shortcut key or something to change it in settings i dont know. But it would be good if I could get the setting to change it back. I know for a fact that my laptops speakers do work, so its not that.
I am realitively new to Premire Pro, and have been working on a stop motion project for my HS. I want to have it to where I can have both of my stop motion sequences playing in the same frame, side by side. I have a sequence of my character doing one thing on side, and another one doing something different, and I want to mash them together to look like they happened at the same time. Like I said I am pretty new to Premire pro, and if you need more infromation, let me know, and I will try to provide.
I just downloaded premiere elements 12, and tried to open new project, but nothing happened.. What i need to do? But i can open organizer without any problem!
