I just downloaded premiere elements 12, and tried to open new project, but nothing happened.. What i need to do? But i can open organizer without any problem!
I have Premiere Elements 12 CD
i´m having a problem opening a premiere pro cs6 project from another computer. My partner can open the project in her computer, but when she sends me the project by mail and i try to open it in my computer i I get t the mesasage " Cannot load project". I´ve tried importing the project into another project but it doesn´t work.
View 2 Replies View RelatedPremiere was running fine for most of the weekend, then began to crash every time I tried to open the project. Other projects open briefly, followed by a crash within 5 minutes.
Most recent error:
Problem signature:
Problem Event Name: BEX64
Application Name: Adobe Premiere Pro.exe
Application Version: 7.2.1.4
Application Timestamp: 52aed7f3
Fault Module Name: StackHash_1dc2
[code]...
When I open my project the media associated with the project shows that it is loading in the lower left hand corner of the program. It gets to about 123 files left to load and then it stops. I then have to attempt to locate all the rest of files with the Link Media tool this works for a few files and then it stops responding. What is the problem and how do I keep my project linked to its media assets?
AE dynamic linked assets
AVCHD video shot on C100
I have cleared the media cache
Media is stored on a 8TB Raid 10 NAS connected with a Gigabit router. The NAS is on my desk connected directly to my computer through the router.
I cannot load Premier 11 and get message 'shared technologies failed' the remainder of programme uninstalls. I have even tried the trial version but same result.
View 4 Replies View RelatedI want to take a sequence that I had in an old project and put it into a current project, but I dont want it to be one rendered file... i still want too see the fades and make changes to it...
View 5 Replies View RelatedIs there a way to load, for example, a wall created in a different project, into another project?
View 1 Replies View RelatedI recently had to upgrade from cs5 to cs5.5 and now all my old dv captures that were saved as mpeg from priemere cs5 wont load and says "file import failure' This happens with anything that I saved through cs5 as an mpeg such as all my finished and exported video files.
View 7 Replies View RelatedI purchased PPCC recently and for some reason it refuses to start up.
The app pops up but then shuts down immediately. I've cleaned up the registry and cleaned up even more space hoping that would do something.
It worked perfectly during the 30 trail. Flawlessly so.
I noticed that after I downloaded After Effects it stopped booting up properly. Not saying that's an issue Im just giving a bit of a timeline.
My computer is a 64-bit OS Windows 7 Toshiba LX835.
I installed revit 2014 and uninstalled revit 2013. Now I can't load RFA files straight into my project.
View 2 Replies View Relatedhow to load .NET project dll file in AutoCAD LT for customization ? Because in plain AutoCAD command is there named NETLOAD to load DLL file but this command is not working in AutoCAD LT.
View 1 Replies View RelatedI have tried exporting in various ways, it will burn to a dvd, but one way wouldn't play sound, another only play on my MAC, another played through media player but not on a dvd player. I looked it up and it says something about Encore. Is that something I have already? If so, how do I access it?
View 3 Replies View RelatedI've made a project in Premiere Pro CS6 with greenscreen footage from a canon XF100 (MXF file).
When I open the project in Premiere Pro CC I can scrub throught the timeline everything is oke.
But playing or rendering the timeline, gives me only the bottom half of the greescreen footage. I see that in Premiere CC the clip with the footage becomes gray after putting an effect on it. When I do this process from the start in CC it works fine. But there are 52 timelines in the project made in CS6.
I tried to export my project. I don't know where it was exported to. I did not see where I could choose the destination. I ultimately want to save it on my google drive.
View 5 Replies View RelatedI have a sequence that has some video that I wanted to edit in After Effects. I right-clicked on the video in the sequence and selected "Replace with After Effects composition" and did my editing. It shows up in the sequence as Linked Comp 5 but Premiere will not or cannot load the media. Why is this and how can I fix it? I have already closed the program and rebooted to no effect.
View 3 Replies View RelatedIs there a limit to the number of sequences I can have in a PPCC project?
View 1 Replies View RelatedI am on the final stages of finishing my first ever HD project, having made the jump Premiere Pro 2.0 to Premiere CS5. Mid-way thru I found it necessary to upgrade to Creative Cloud, so that is where I am working now. The HD world is so vastly different from the old SD flow that every single step of this project has been a huge learning curve for me. I am basically an 'oldie' but for all practical purposes I am a total 'newbie' at this. That said, I am now finding myself ready to export my project to DVD in a SD form with Stereo sound.
I am working with footage shot on the Red Epic. At my current stage I am working withh ProRes 444 renders from which I have created a full nested 74 minute timeline. Frame rate is 23.976 and the source is1920x1080 with 1.0 square pixels.
So now my movie is done, and it looks and sounds like I want it to. The question now, in a nutshell, is what file type and settings should I use to export my movie so that I can retain aspect ratio? Should I output a movie first or take the project into another program like encore first and make my disc from there?
Also, I have my first screening coming up (primarily for cast and crew and industry insiders) in a couple of weeks, so I need to create a 1080 HD File with my 5.1 surround track that I project from a laptop. The screening venue has the capability to do that via a simple HDMI cable hookup, but does the laptop I use need to have any special capabilities to do the job? And what is the best file type to use for that?
I have always been more of an artist than a tech head, but I am pretty much doing the whole post on this movie alone, with the exception of the Dissolve renders and the sound design, which I had done for me (I have a great finished 5.1 design in .wav format, as well as a stereo version).
I should also mention that I currently have Encore CS5. Can I work with this on a Premiere CC project?
The project weight is almost 2 GB.Is taking hours open my project file. I have to send a edit by tomorrow but right now I don't know if I will be able to open my project to start editing.
I have read in your forums this is a common bug but nobody say how can be solved, I already lost all day waiting and I can't be waiting all night to start the editing at early morning, this is totally insane. I'm editing in a Macbook Pro Retina with 16 GB of RAM.
I edited a lot in this computer with this software version ( CS6 ) and never got this problem.
In this project are sequences with Magic Bullet effects and Warp Stabilizer but this can't be an excuse, must be a solution for this because I already lost 8 hours looking to my screen.
I'm running Adobe Premiere Pro CC on a 2011 Macbook Pro, and I was working on a project. When I went to render the whole sequence, Premiere froze and auto quit. When I went to open the project again, I got the error:
"This Project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type."
Every version of the project's auto-save files gave the same error. I tried all of the suggested tips like deactivation and clean uninstall, but nothing's changed.
Will taking the project to another computer work?
Just finished editing a project and want to send it to someone without all the excess. I understand you go to the Project menu and select Project Manager. Only problem is I don't have a Project menu.
View 1 Replies View RelatedThere is no Project Panel when I capture clips to Premiere Pro CC. There is only a Media Browser so how do I create a Project Panel if there is not one already?
View 1 Replies View Relatedeach time I force quit Smoke with the service monitor in a project when I open the same project after it takes several time to load the clips (EDITDESK: LOADING CLIPS). Sometimes the project just didn't open and stay on the EDITDESK: LOADING CLIPS screen.
There's something I'm doing wrong or my project is totally corrupt ?
smoke201321_smack02_app.txt smoke201321_smack02_shell.txt
We have stored lisp in fileserver which 30 users can access it. Now a day some users have getting the ‘failed to open project’ error after load the Lisp due to this they r also not getting most of the commands. The full rights have been given to appropriate folder which contains (Autolisp application source file, .vlx, Autocad VBA source). It has working for limited users (8-10 users).
Server OS: Windows server 2008
Note: Previously we had used windows server 2003.
how to copy and paste a bin from one project file into another. I don't want to import using the Media Browser because it imports a bunch of reference files that are already in the project file I'm pasting into.
View 4 Replies View RelatedI have a Flash project I'm working on that is video with corresponding bulletpoints displayed next to it. While I've gotten it to work with embed cue points in the FLV file so that at certain times in the video the Flash movie goes to certain frames to display the relevant bullet points I haven't gotten it so that it can tell what the appropriate bullet point is if someone scrubs the video past the last cue point trigger. I found a process to do it using actionscript cue points instead of navigation cue points (via this guide: [URL], but it uses an external xml file for the cue points. My problem is that I can't figure out how to get that XML file without having to redo all the cue points manually. Is there someway to make Premiere Pro (CS3) export an xml file of the markers placed in my timeline instead of embedding them into the FLV file? Alternatively if there is a way I could extract them from the FLV file, that would be acceptible too.
View 3 Replies View Relatedi am starting a film project to edit, what is the exact 2k project sequence settings & project settings,like frame rate,2k resolution size,progressive or ?the project pipeline is - premiere to speedgrade to Lab print(Negative or UFO or Qube)
View 1 Replies View RelatedI am working on a feature length film which has 48 sequences with subclips and rough cuts created in Prelude. Now I want to start bringing this footage into Premiere for editing, but I am wondering is there benefits or drawbacks to creating a Premiere project for each sequence then merging them all together in one master project file after finished working on each sequence?
I'm trying to determine which way would be the easiest to keep things organized and not so overwhelming.
Been using Prem Pro CC for a few months and working on a project yesterday, went to open today and the message below came up!
I then tried opening up previous projects and the same again has happened with the below message.
"This project contained a sequence that could not be opened. No sequence preview file or codec could be associated with this sequence type."
I did a project with one sequence at 24fps, but I need change framerate of sequence to 25 fps for not have that reedit all, now. Is possible change framerate of sequence and that automatic way the editions be adapted at this framerate?
View 4 Replies View RelatedI got this message when trying to load a WIP file: "The project could not be loaded, it may be damaged or contain outdated elements."
I've searched the forums as well as on other sources on how to deal with it. So far I've tried:
1. Check files on AutoSave folder. No luck. All 5 files gave the same message
2. Fix XML with XML wrench. Tried the "Check is Well Formed" & "Check is Valid" and both said ok"
3. Restarted PC. Same thing.
4. Move project and working files to other folders - same.
5. Created a blank project and tried to import sequence - no sequence show up.
6. Import from After Effects and Exported - no luck as well. Came up with a message saying there's no valid sequence.
Some info:
Adobe Premiere Pro 6.0
Windows 7 64bit
Using Plural Eyes plugin
I have looked everywhere for instructions on how to export a premiere pro project and sequence, and associated media, to final cut pro on another computer. Exporting the xml does not include the media files. Therefore when my editor opens up the xml file it fails. I have a feeling I need to use Media Encoder to export the media associated with the project. Yet I cannot find any guides or instructions for how to undertake this. My editor is using FCP 7 on another computer in another place, so I need to export 8 sequences/projects *with their media* to him via the internet (dropbox) so that he can do a final edit on his machine. I would even be happy just to be able to export a working AAF since that option also hasn't worked for us.
View 4 Replies View Related