I recently had to upgrade from cs5 to cs5.5 and now all my old dv captures that were saved as mpeg from priemere cs5 wont load and says "file import failure' This happens with anything that I saved through cs5 as an mpeg such as all my finished and exported video files.
Premiere was running fine for most of the weekend, then began to crash every time I tried to open the project. Other projects open briefly, followed by a crash within 5 minutes.
I just downloaded premiere elements 12, and tried to open new project, but nothing happened.. What i need to do? But i can open organizer without any problem!
When I open my project the media associated with the project shows that it is loading in the lower left hand corner of the program. It gets to about 123 files left to load and then it stops. I then have to attempt to locate all the rest of files with the Link Media tool this works for a few files and then it stops responding. What is the problem and how do I keep my project linked to its media assets?
AE dynamic linked assets AVCHD video shot on C100 I have cleared the media cache
Media is stored on a 8TB Raid 10 NAS connected with a Gigabit router. The NAS is on my desk connected directly to my computer through the router.
I have a sequence that has some video that I wanted to edit in After Effects. I right-clicked on the video in the sequence and selected "Replace with After Effects composition" and did my editing. It shows up in the sequence as Linked Comp 5 but Premiere will not or cannot load the media. Why is this and how can I fix it? I have already closed the program and rebooted to no effect.
I cannot load Premier 11 and get message 'shared technologies failed' the remainder of programme uninstalls. I have even tried the trial version but same result.
i´m having a problem opening a premiere pro cs6 project from another computer. My partner can open the project in her computer, but when she sends me the project by mail and i try to open it in my computer i I get t the mesasage " Cannot load project". I´ve tried importing the project into another project but it doesn´t work.
As the tittle says, my texture is not fully rendering, or well, something wrong is rendering, i don't know. The model has 3 textures applyd, diffuse, normal and spec. However, when i render, parts of my mesh (closest/straith before camera) turns squary and white.
I'm running Windows 8.1 on a Surface Pro 2. I've got up to date Wacom Feel drivers.
The issue is, when I've got the "Tip Feel" set to medium in the Wacom Pen Tablet settings in the Control Panel, I cannot get a fully opaque stroke. No matter how hard I press, it takes at least two strokes of the same color (I used full black in my picture) to get a fully opaque stroke.
In the image, I changed the settings in the Wacom Pen Tablet settings to softer, eventually getting to the softest. While in the softest setting, I could get the pen to produce a fully opaque stroke, but then I lose the full range of Shape Dynamics pressure sensitivity. I know I can just turn the opacity control off to get fully opaque strokes, but I'd prefer not to, as that'd be a fairly big interruption to my workflow.
Since initially installing PS CS6, the tooltips do not completely display. I get part of the white band to pop up that displays slightly less than the first letter of the tool tip. I have uninstalled and reinstalled and the problem persists. I'm using Photoshop CS6 v. 13.0.1 x 32 on Windows 7 Enterprise. I have the Adobe Design and Web Premium CS6 and tool tips work just fine on all the other programs that I use in the suite.
I have used PSPx7-X3 over the last several years, so I'm experienced at installing new versions.This change to PSPX4 has been giving me fits!
At the moment, only PSPX4 has been installed PLUS the 1st Service Patch.
PROBLEM:When I start, it hangs on the first start up screen with the photo of the girl and the words "Starting Up..."It won't go any further.
I have tried:
1. Uninstalling and re-installing.
2. Uninstalling, running the Corel PSPX4 Clean-Up Tool, and re-installing.
3. Holding "shift" while opening.
4. Running as administrator - although I'm the only user on this laptop. There are not other accounts BUT administrator.
5. I have tried removing the the Corel folder from the app data folders - both in local and in roaming.
Additional Info:I had NO problems with PSP (x3 before Christmas) until Dec. 22 when Windows ran an automatic update which caused HAVOC with my computer. In the next few days, I had to do several system restores and un-stalls of PSPX3 just to get it running to finish up Christmas gifts. I can't just NOT do the critical Windows updates - but I don't know if they are causing an issue with PSP.
I'm using photoshop 7.0 and my problem occurs with Imageready. I am using Vista, but this has not been a problem for the past year (so I don't think it's Vista related).I recently created an animation in Imageready and it worked just fine. However, when I returned to use Imageready again, I received the error listed above.Reinstalling does not resolve this problem. If I do a system restore, I am able to use Imageready again. . . but only one time. after which the same error occurs.
I have a Windows 64-bit system, Vista Home Premium.Had CS4 installed initially, ran without problems.
I got the CS5 upgrade, and installed it without problems. I have copied over various actions and other customizations from the CS4 installation folders to the CS5 installation folders, installed 3rd party plug-ins into CS5, etc.So to save on Disk space, I want to Uninstall CS4 (and with it Bridge Version 4 as well).
I've done some searching here, and apparently this is potentially not as straightforward as one would expect. Various problems have been reported, apparently confirmed by Adobe personnel, that Uninstall CS4 also removes CS5 files, rendering it unable to run, etc.
So - what is the proper procedure to follow to successfully Uninstall CS4 without creating problems for CS5? Do I need to deactivate the license for CS4? What other specific steps?
I have been using Photoshop for years with no problems. I had to reinstall it a couple of time due to my PC having problems. But this is the first time i have had this problem.
I open an image and it is transparent. All you see is the boarder. When i select the boarder you can see the image, but as soon as i click off the boarder it disappears.
This image shows that you can not see the picture, but there is a file and an image, as you can see the layer on the right with a picture in it.
This has never happened before, i assume that there is a setting to be changed, but i cannot find it.
I made this sketch and the two marked dimensions were added when i pressed the Automatic Dimension and Constraints tool, because, in spite of all the dimensions i put manually, the sketch wasn't fully constrained.
Why wasn't it? it seems to me that i gave all the necessary information.
I've previously posted about poor performance across our WAN, and working with Toolspace open. I have suspected that maybe the drawing wasn't loading completely, so whenever I did certain operations, C3D needed to go back across the WAN to the server for more of the drawing, or maybe just to read some portion of the drawing file, where the request was getting delayed by latency in the server.
Anyway, today, I copied a drawing file to my harddrive and opened it. As expected, the drawing loaded fairly quickly, except for having to go out to the server to syc the references and xref'd drawings. But once loaded, everything worked the way it is supposed to. I can turn on the contours, and it just happens. I can open the drawing settings, and then close them, and I instantly have control back, all with Toolspace open.
Now, C3D may still be needing to go back to the drawing for whatever it is that it needs, but being on my harddrive, it can get what it needs very quickly.
My question is: Why doesn't C3D completely load a drawing into memory? We now have 64 bit systems with access to gobs of memory.
is it hard for Autodesk to have/create fully RGBA clips (clips with embedded alpha).I'm not so sure what's the main advantage to have clip with separate matte (black & white), since all compositing software even FCP can handle it.
I found that this function a bit outdated n you end up doing lot of steps even to accomplish simple result.
It seems there is a problem with Inventor 3D Sketching. I have a 3D Sketch, with 1 fully constrained vertical line, and another vertical line with an open length. I then join the 2 lines with a line on the top. When I give the top line an angle dimension, I expect it to be fully constrained, but it appears not as the line remains "green".
See attached file.
Windows 7 Inventor Suite 2011 Dell Precision M6400 Intel(R) Core(TM) Duo CPU 2.40GHz RAM 12 GB NVIDIA Quadro FX 3700M Spatial Feedom - Astroid
How do you convert a read only dwg to a fully functional dwg? I had to force quit AutoCAD when I got the rainbow spinning wheel (on Mac) and now when I reopen, it says it is currently in use and would I like to open the read only version. Meanwhile, I can't save any changes in this version! Am I royally screwed? Is there a way to convert back to normal?
One of our AutoCAD drawings circa 1990 on only one of our machines (our newest, 64-bit, Win 7, see more specs in attachment) opened only partially in ACAD 2008. If saved in this state, the drawing permanently loses whatever information was not loaded, so I’m pretty sure it’s not a display issue. All of our other machines are much, much older, running Windows XP Prof, none of them have exhibited this phenomenon. It happened regardless of whether the file was on the hard drive or on the server. Any way to fix this so that 2008 works correctly on this machine with all drawings. BTW, this did not happen with two drawings dated 1989.
I know the files are "supported", and will open. However, the quality is quite bad and nowhere near as good as opening the same file in Capture One. Also, long exposure shots see the "black frame" totally discarded and the images are extremely noisy. Phase One support say it's because LR and CS6 are only using a portion of the Raw file and to ask Adobe.
I would migrate to LR5 today if there were a fix or an explanation. Capture One forkflow doesn't suit me. However, the quality is just too bad to accept.
I imported a song into After Effects CS6 to use audio waveforms. I click RAM preview but it won't render or play past 18 seconds. What am I doing wrong and how do I render the entire audio track so it will actually play all the way through with the effects on it.
I have noticed that with CS 6, I can't fully use an application by clicking on it from another open application. If I am in Illustrator and Photoshop is in the background, I click on the Photoshop interface and it comes to the front of the screen, but that's all it does...no functionality beyond this. What must be done is for me to click on the Finder first, then click on the application icon in the Dock in order to access the program's functionality fully.
It doesn't matter if it's Lion or Mountain Lion...I have two machines with different operating systems and both do the same thing.
I don't know if this is an Adobe issue or an Apple OS issue. I have looked into all the preferences on the applications as well as the OS X control panels...no luck.
i downloaded Photoshop CS 6 and wanted to try it. I opened a picture to render but, as you could read in the title, the pictur is partly transparancy. Actually it isn't (that fact you can also see under Layer).
When I duplicate the layer, than the layer above is completely transparent ...
When I found that X2 totally cannot handle my 720p clips, I upgraded to X3, and was happy to see that all my 1280x720p 60fps clips can be imported without a hint of complaints from X3.
However, as I started working with those clips, something does not work quite right.The main issue is that I could not get smooth slow motion out of those clips. 60fps clips when played at half speed should give you very smooth slow motion at 30fps. Instead, it stutters badly.
On further investigation of a straight render 60fps video output from VS with no changes made, I found where the problem was.VideoStudio coverted the 1280x720p 60fps clips to 30fps when importing the file. So every other frame from the 60fps clip is dropped, and previous frame duplicated.
Interestingly, it does NOT do this with 1080p 60fps file. You can get very smooth half speed playback at 30fps, even though you cannot create a 1080p 60fps output file.
Do I have to wait for X4 for proper 720p 60fps support?
Given my problem with jerky video in VS4 (see this thread), I decided to give Smart Proxy another try and switched it on. To my dismay, not only does it take ages to render the proxy videos, but the computer seems to be rather underused during rendering.
VS4 took two hours to create the proxy of a 20-25 minutes 1080p file, 4GB in size. During this time, according to Task Manager, only four of my eight CPU cores are significantly busy (though still below 50%), and disk I/O is in the area of 6-700kB/s for either direction. I took care to put the proxy directory on a third disk - away from the operating system and the source videos. 25% of the 8GB memory is used.Would the smart proxy rendering process make more efficient use of the available resources, it wouldn't take half the time.
VS4 configuration
VS4 service pack 2, version 14.2.0.23
Hardware acceleration is set for both editing and file creation
The video material is 1080p, 59.940 frames/sec, variable bit rate (max 26000kbps) and comes from my Panasonic camcorder. I used the tool that came with the camcorder, HD Writer AE, to copy the files to the hard disk. Audio is Dolby, 48000Hz, 256kpbs (I have no problems with audio).
Project properties:
NTSC drop frame (29.97 fps) MPEG files 24 bits, 720 x 480, 29.97 fps Upper Field First (DVD-NTSC), 16:9 Video data rate: Variable (Max. 8000 kbps) LPCM Audio, 48000 Hz, Stereo
