Photoshop :: Want To Uninstall CS4 Now That CS5 Is Fully Installed And Running
Apr 16, 2012
I have a Windows 64-bit system, Vista Home Premium.Had CS4 installed initially, ran without problems.
Â
I got the CS5 upgrade, and installed it without problems. I have copied over various actions and other customizations from the CS4 installation folders to the CS5 installation folders, installed 3rd party plug-ins into CS5, etc.So to save on Disk space, I want to Uninstall CS4 (and with it Bridge Version 4 as well).
Â
I've done some searching here, and apparently this is potentially not as straightforward as one would expect. Various problems have been reported, apparently confirmed by Adobe personnel, that Uninstall CS4 also removes CS5 files, rendering it unable to run, etc.
Â
So - what is the proper procedure to follow to successfully Uninstall CS4 without creating problems for CS5? Do I need to deactivate the license for CS4? What other specific steps?
View 10 Replies
ADVERTISEMENT
Jun 28, 2009
I recently installed CS4 upgrade on my laptop and would now like to uninstall the version of CS2 that I have been using.Will removing CS2 remove any shared files that are necessary for CS4 to work properly? The reason for removing CS2 is that I am quickly running out of available disk space on drive C. As a side question, is it possible to delete CS4 from my laptop and re-install it on my D drive (how wil that affect my activation?)
View 3 Replies
View Related
Apr 15, 2012
I downloaded Lightroom 4.0 and upgraded from 2.6, can I safely uninstall 2.6 after 4.0 is installed?
View 4 Replies
View Related
Sep 17, 2012
uninstall switch to silently uninstall autocad 2013?
View 2 Replies
View Related
Nov 23, 2012
cs6 upgrade is installed, do I need to keep CS4 installed?
View 7 Replies
View Related
Oct 29, 2013
I'm running Windows 8.1 on a Surface Pro 2. I've got up to date Wacom Feel drivers.
Â
The issue is, when I've got the "Tip Feel" set to medium in the Wacom Pen Tablet settings in the Control Panel, I cannot get a fully opaque stroke. No matter how hard I press, it takes at least two strokes of the same color (I used full black in my picture) to get a fully opaque stroke.
In the image, I changed the settings in the Wacom Pen Tablet settings to softer, eventually getting to the softest. While in the softest setting, I could get the pen to produce a fully opaque stroke, but then I lose the full range of Shape Dynamics pressure sensitivity. I know I can just turn the opacity control off to get fully opaque strokes, but I'd prefer not to, as that'd be a fairly big interruption to my workflow.
View 2 Replies
View Related
Jul 1, 2013
Since initially installing PS CS6, the tooltips do not completely display. I get part of the white band to pop up that displays slightly less than the first letter of the tool tip. I have uninstalled and reinstalled and the problem persists. I'm using Photoshop CS6 v. 13.0.1 x 32 on Windows 7 Enterprise. I have the Adobe Design and Web Premium CS6 and tool tips work just fine on all the other programs that I use in the suite.
View 2 Replies
View Related
Apr 15, 2009
I'm using photoshop 7.0 and my problem occurs with Imageready. I am using Vista, but this has not been a problem for the past year (so I don't think it's Vista related).I recently created an animation in Imageready and it worked just fine. However, when I returned to use Imageready again, I received the error listed above.Reinstalling does not resolve this problem. If I do a system restore, I am able to use Imageready again. . . but only one time. after which the same error occurs.
View 1 Replies
View Related
Feb 27, 2012
I have been using Photoshop for years with no problems. I had to reinstall it a couple of time due to my PC having problems. But this is the first time i have had this problem.
Â
I open an image and it is transparent. All you see is the boarder. When i select the boarder you can see the image, but as soon as i click off the boarder it disappears.
Â
This image shows that you can not see the picture, but there is a file and an image, as you can see the layer on the right with a picture in it.
This has never happened before, i assume that there is a setting to be changed, but i cannot find it.
View 4 Replies
View Related
Feb 18, 2013
I have noticed that with CS 6, I can't fully use an application by clicking on it from another open application. If I am in Illustrator and Photoshop is in the background, I click on the Photoshop interface and it comes to the front of the screen, but that's all it does...no functionality beyond this. What must be done is for me to click on the Finder first, then click on the application icon in the Dock in order to access the program's functionality fully.
Â
It doesn't matter if it's Lion or Mountain Lion...I have two machines with different operating systems and both do the same thing.
Â
I don't know if this is an Adobe issue or an Apple OS issue. I have looked into all the preferences on the applications as well as the OS X control panels...no luck.
View 3 Replies
View Related
Feb 8, 2013
i downloaded Photoshop CS 6 and wanted to try it. I opened a picture to render but, as you could read in the title, the pictur is partly transparancy. Actually it isn't (that fact you can also see under Layer).
When I duplicate the layer, than the layer above is completely transparent ...
View 2 Replies
View Related
Nov 21, 2013
I have been using PSE 6 happily on my iMac under OS 10.6.8. Now it won't open fully. I get a blank opening screen and functionality. Tried deleting and copying my programme from backup but same result. The installer only works once. What can I do.
View 3 Replies
View Related
Sep 25, 2013
Tried to install the Adobe Photoshop Elements 10 on my D drive. Did choose the D drive for installation, and still it is installing on my C drive. How can I install this program fully on my D drive
View 2 Replies
View Related
Apr 10, 2012
In PS CS5 when I open an image with height dimension in range of 1405-1411 or 1873-1882, the image opens half off the bottom of the screen. Width does opt seem to matter. Â
Â
I assume this is a bug, but until fixed I am trying to work around.
Â
For manual editing the vertical fit screen button or zooming out causes the image to come on screen, but is neither of these display options will record in an action.Â
Â
When an image is opened half off screen, a Place command does not place accurately for these images. Thus an action that includes a Place does not run correctly for these images.Â
Â
So either I want to find a setting (nothing in preferences that I can find) to force the image to open on screen, or find a command that will run in an action that causes image to come on screen, while not interefering with images that open normally.                    Â
View 4 Replies
View Related
Sep 5, 2012
Have just upgraded from Elements 9 to Elements 10 and used the File -> Rename function to rename 3000 files with a new Base name beginning 'Base' the process reported it had completed and did not provide any additional messages - but checking the result not all files were renamed and a large number were left behind with the original Base name.
View 19 Replies
View Related
Feb 14, 2013
As the tittle says, my texture is not fully rendering, or well, something wrong is rendering, i don't know. The model has 3 textures applyd, diffuse, normal and spec. However, when i render, parts of my mesh (closest/straith before camera) turns squary and white.
[URL]
View 9 Replies
View Related
Apr 6, 2014
I purchased PPCC recently and for some reason it refuses to start up.
Â
The app pops up but then shuts down immediately. I've cleaned up the registry and cleaned up even more space hoping that would do something.
Â
It worked perfectly during the 30 trail. Flawlessly so.
Â
I noticed that after I downloaded After Effects it stopped booting up properly. Not saying that's an issue Im just giving a bit of a timeline.
Â
My computer is a 64-bit OS Windows 7 Toshiba LX835.
View 4 Replies
View Related
May 28, 2011
I am trying to render to DV 4:3 with video studio 4 but the finish video is missing a piece.
Video Studio 4
OS - XP
View 1 Replies
View Related
Dec 29, 2011
I have used PSPx7-X3 over the last several years, so I'm experienced at installing new versions.This change to PSPX4 has been giving me fits!
At the moment, only PSPX4 has been installed PLUS the 1st Service Patch.
PROBLEM:When I start, it hangs on the first start up screen with the photo of the girl and the words "Starting Up..."It won't go any further.
I have tried:
1. Uninstalling and re-installing.
2. Uninstalling, running the Corel PSPX4 Clean-Up Tool, and re-installing.
3. Holding "shift" while opening.
4. Running as administrator - although I'm the only user on this laptop. There are not other accounts BUT administrator.
5. I have tried removing the the Corel folder from the app data folders - both in local and in roaming.
Additional Info:I had NO problems with PSP (x3 before Christmas) until Dec. 22 when Windows ran an automatic update which caused HAVOC with my computer. In the next few days, I had to do several system restores and un-stalls of PSPX3 just to get it running to finish up Christmas gifts. I can't just NOT do the critical Windows updates - but I don't know if they are causing an issue with PSP.
View 14 Replies
View Related
Nov 24, 2013
I have recently switched from the Creative Cloud subscription to the Photoshop/Lightroom CC program because I didn't use any of the other apps (so why pay for them).
Â
I am having issues with PS and tried to uninstall it from my iMac in the manner I know to uninstall programs and can't seem to get it done.
Â
I need to uninstall so I can download another version to be able to use it.
View 1 Replies
View Related
Jul 29, 2013
i had a trial of cs6 installed on my computer decided not to go with it going with another one now it wont uninstall. It shows up in uninstall and when i click on it to uninstall it says Uninstall Failed Your Uninstall encountered errors. I have ran the cleaner tool and it did nothing didnt pick it up? how do i get this off so i can get the one i want?
View 2 Replies
View Related
Dec 13, 2008
Would you believe it? I cannot uninstall CS4. Says Bridge is running.
This is on my Dell workstation, the one on which CS4 installed effortlessly.
View 5 Replies
View Related
Nov 13, 2008
I see tons of negative feedback on CS4 - is this typical of this forum or is this a program that's not ready to be hatched so to speak. I just shelled out a fortune to purchase CS 3.3 (CS Web Premium).
I also see that several people have had trouble uninstalling these trials so I'm reluctant to even find out for myself. I had the same problem trying to evaluate CS3 in that it wouldn't install completely and wouldn't remove at all. FORMAT is a dirty word in this house.
View 10 Replies
View Related
Feb 14, 2008
My daughter thought she would help me get rid of unused installed software on my computer so she uninstalled CS2. However, she didn't select the option of uninstalling so it could be reinstalled again.
View 1 Replies
View Related
Jan 27, 2008
I want to Uninstall Adobe Photoshop Cs and ImageReady CS from my computer, but its not letting me. I go to Add/Remove programs under control panel (Windows XP Service PAck 2) and this error Pops up.. --And im going to type it exactly how it came to me...
Adobe Photoshop Cs and ImageReady CS
>SetupDLLSetupDLL.cpp (443)
PAPP:Adobe Photoshop CS and ImageReady CS
PVENDOR:Adobe(http://www.adobe.com)
PGUID:EFB21DE7-8C19-4A88-BB28-A766E1 6493BC
$7.1.100.1248
@Windows XP Service Pack 2 (2600) IE 7.0.6000.16574
View 9 Replies
View Related
Aug 30, 2013
I made this sketch and the two marked dimensions were added when i pressed the Automatic Dimension and Constraints tool, because, in spite of all the dimensions i put manually, the sketch wasn't fully constrained.
Why wasn't it? it seems to me that i gave all the necessary information.
View 5 Replies
View Related
Dec 13, 2012
I've previously posted about poor performance across our WAN, and working with Toolspace open. I have suspected that maybe the drawing wasn't loading completely, so whenever I did certain operations, C3D needed to go back across the WAN to the server for more of the drawing, or maybe just to read some portion of the drawing file, where the request was getting delayed by latency in the server.
Anyway, today, I copied a drawing file to my harddrive and opened it. As expected, the drawing loaded fairly quickly, except for having to go out to the server to syc the references and xref'd drawings. But once loaded, everything worked the way it is supposed to. I can turn on the contours, and it just happens. I can open the drawing settings, and then close them, and I instantly have control back, all with Toolspace open.
Now, C3D may still be needing to go back to the drawing for whatever it is that it needs, but being on my harddrive, it can get what it needs very quickly.
My question is: Why doesn't C3D completely load a drawing into memory? We now have 64 bit systems with access to gobs of memory.
View 9 Replies
View Related
Jul 12, 2012
is it hard for Autodesk to have/create fully RGBA clips (clips with embedded alpha).I'm not so sure what's the main advantage to have clip with separate matte (black & white), since all compositing software even FCP can handle it.
I found that this function a bit outdated n you end up doing lot of steps even to accomplish simple result.
View 2 Replies
View Related
Aug 10, 2010
It seems there is a problem with Inventor 3D Sketching. I have a 3D Sketch, with 1 fully constrained vertical line, and another vertical line with an open length. I then join the 2 lines with a line on the top. When I give the top line an angle dimension, I expect it to be fully constrained, but it appears not as the line remains "green".
See attached file.
Windows 7
Inventor Suite 2011
Dell Precision M6400
Intel(R) Core(TM) Duo CPU 2.40GHz
RAM 12 GB
NVIDIA Quadro FX 3700M
Spatial Feedom - Astroid
View 7 Replies
View Related
Mar 12, 2012
i am beginer in Assembly,How i come to know whether my assembly is fully constrained or not?
View 2 Replies
View Related
May 7, 2012
How do you convert a read only dwg to a fully functional dwg? I had to force quit AutoCAD when I got the rainbow spinning wheel (on Mac) and now when I reopen, it says it is currently in use and would I like to open the read only version. Meanwhile, I can't save any changes in this version! Am I royally screwed? Is there a way to convert back to normal?
View 3 Replies
View Related