I have seen it in Dateline and 60 Minutes, they are highligting and article, e-mail or memo; the page zooms in and goes out of focus ( this is easy) but then an excerpt of the article rips out of the page and the important statement with jagged edges comes into focus. I have seen it several times so I don't know if it is just a plain graphic or an After Effex template. I have Google it and found nothing.
View 4 RepliesI am forced to use 75% zoom for Android Mockups i work on, unfortunately the default zooms are 100% / 66% / 50% etc...
Is it possible to set another default zoom somewhere?
When I use the magnifying tool (PS CS3) to zoom in on a section of a file, all the other files which are open in CS3, also zoom. When I unzoom the file I am working on, the other files stay zoomed until I manually change them back. This doesn't happen if I use control + to magnify - but using control + does not magnify the file in the specific part of the file I need. This is driving me batty. I think this started happening when a co-worker uploaded a folder from her external drive to my desktop. I did a system restore and this annoying problem stopped. She uploaded more files later and the problem came back. I also notice my folder settings getting rearranged after she uploads her files. Could this have anything to do with her running on a 64 bit Vista machine, and me on a 32-bit XP? Could this be triggering a preference change that I can just undo?
View 4 Replies View RelatedAfter an update to Photoshop 13.1.6 x64, the scroll wheel on my mouse quit working as a zoom tool.
View 1 Replies View RelatedIn AutoArchitect 2012 I am getting unwanted zooms in my viewports, for instance if I'm pasting in a portion of another drawing, disturbing the drawing scale. I don't like working with all the viewports locked, but I really don't want AutoCAD zooming for me. How do I turn off this new feature?
View 1 Replies View RelatedI'm running 2013 C3D and have a quirk that my drawings zoom out when I first open the file. I'm not even sure what they are zooming out to as it is not 'Extents'.
View 9 Replies View RelatedI upgraded from CS1 to CS4 yesterday and immediately encountered a problem with the way Photoshop (not Bridge) displays images to the monitor. At zooms of less than 200%, the image that appears is divided into squares in which the correct picture is displayed below each square's diagonal and solid vertical lines of color are displayed above the diagonal. I've checked jpeg, tiff, and psd files. At 200% or higher, everything is fine.
Dell XPS 420
ATI Radeon HD 2600XT
(I checked and the driver is up to date)
In paperspace, each time I double click inside the viewport it automatically zooms to the extents of my drawing, changing the scale. Also, when I switch back to model space i am zoomed to extents in model space. How can I fix this?
View 2 Replies View RelatedThe drawing “zooms to extent” AUTOMATICALLY!
I’m wonder why the attached file zooms to extent AUTOMATICALLY when applying some commands.
For example if I need to use the command “mleaderalign” then the file zooms out AUTOMATICALLY!!!
How to control this very weird behaviour?
Why the file may zoom AUTOMATICALLY?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I'm using AutoCAD 2011 and here is the situtation. I create a viewport. I zoom in to the scale I want to use. Once setup i click out into paperspace all is good. However if i do not lock the viewport, the moment i click back on it, the viewport automaticly zooms extents and screws up what i was trying to show . Is there a setting somewhere that should be set from 1 to 0 or a box not checked off that i'm missing?
View 6 Replies View RelatedAfter adding a puppet warp mask over my layer I click to start adding pins and it automatically zooms in 100% around the first pin and changes the current layer I'm on to a 100% crop of what is around the pin. If I zoom out it just zooms out of my current cropped image. I cant pan or move around and if I apply the puppet warp it apply it to that small section that it just zoomed into. Very odd and I can't seem to find a work around. I've used puppet warp several times in CS5 and a few times in cs6 but this just started happening. 13.0.1 x64 Windows 8.
View 2 Replies View RelatedSo normally when you hold the space key and drag, it just moves the canvas, but every now and then, seemingly randomly, it zooms way out and shows a little box which is the size and shape of the area of canvas I was previously looking at. If I move the box and let go of space, it zooms to that location, but all I wanted was to move normally. I don't think I've ever wanted the zoom out, move, then zoom back in behavior.
View 5 Replies View RelatedI am having trouble with the geo marker and the geographic settings. the file given to us has a pre defined grographic location, (which is incorrect) which is making the file zoom out a lot further than desired. I change the geographic location and the position of the geo-marker, but when I use zoom extends, it still zooms all the way out to the undesired distance. There is no "space junk" out that far, so I do not know what else it can be.
View 4 Replies View RelatedI have a problem with some drawings. When double clicking in a viewport that is unlocked (for the purpose of panning) the viewport zooms to extents.
View 6 Replies View RelatedI'm in paper space, in a drawing I didn't create and, when I dbl. click in a viewport to open it and attempt a zoom, the entire paper space environment zooms, as if I was still in paper space, although the task bar tells me I'm in model space. Is this because the viewport is locked? If so, how do I unlock. I see nothing on screen regarding padlocks, except the tool bar/ window positions padlock.
If it makes a difference, I'm in Acad 2006, not 2006 T.
I have this HUGE maps I have to import to create pan and zooms. The file is a PNG with a resolution of 25000 x 16400px. Smoke doesn't play nice when I import this dil. It's all black and won't render. If there a max file resolution in Smoke? Or is it a problem with PNG files? (I tried with PSD adn it did the same).
View 3 Replies View RelatedI'm having trouble with my zoom tool. If I have multiple Photoshop windows open, when I go to either zoom in or out of the top window... ALL the other windows mirror what's happening to the top window.
View 5 Replies View RelatedIs there a way available in autocad so that size of chosen entity (say circle, polygon) remains as is during zoom-in and zoom-out?
View 4 Replies View RelatedAutoCAD 2013 2D - when scrolling the viewport scale list, the viewport zooms with each scale instantly.
View 1 Replies View RelatedIf I click on an object that has a modifier, the focus goes straight to the modifier and I cannot click on anything else unless I click on the parent object in the stack. This is a pain when I am randomly selecting objects. Is there any way for 3DS Max to keep the focus on the object when I click on it rather than going straight to the modifier.
View 1 Replies View RelatedUsing Acad 2010
Is there a way to remove the *Model* page setup entry from the list of Page Setups in the Page Setup Manager? This is the first time I am seeing *Model* in the list, and I suspect that it the reason I am not able to generate a PDF for this particular drawing. When I try, I get the following error:
=========================
Job: - Error(s) Did Not Plot
Job ID: 5
Sheet set name:
Date and time started: 2/1/2012 10:34:53 AM
Date and time completed: 2/1/2012 10:34:54 AM
UserID: AchrisK
Profile ID:
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
Sheet: 123456-Model - Error(s) Did Not Plot
File: C:Drawings123456.dwg
Category name:
Page setup:
Device name:
Plot file path:
Paper size:
ERROR: Internal Error: Failed to get Plot Settings Dictionary.
==================================================
I have this idea that removing *Model* from the list will do it. In addition to causing PDF creation failure, I believe it is also responsible for forcing the Model to always be in the Publish list, even though I have unchecked the "Include model when adding sheets" option. I can remove it from that list manually, but it comes back every time.
I quite often need a separate ruler scale on each page of a multi-page document. The only way I know how to do this is to create a separate document for each drawing that requires a new scale.
I request that you add the ability to change the ruler scale on a per page basis within a single multi-page document.
I am using CDR X5 SP1.
Use merge for standard things like labels.Have a large ongoing project which requires
Lots of Excel data - eg: 6685.excel example.tifcolumns x AZrows x 300 upwards
All rows required to create a book of running information.
If I use a label type approach some rows have less data making the layout uneven (unsuitable for the project)
Is there a way to merge with a fluid result ?
Ie row one takes up 2 lines Row 2 takes up 5 lines Row 3 takes up 1 line etc
0728.excel example.tif
Several times a week I need to take a PDF (single-page doc), then convertto a page-sized PNG with quality good enough to read the text (and atransparent border), and then convert to a SWF. I have a PNG-to-SWFutility, but when I used it on the PNG saved after I opened my PDF andexported from GIMP, the end result was not good enough. A co-worker saidGIMP couldn't make a PNG (w/transparency) with enough quality. He said we'dhave to use some other software. Part of the issue was not being able toresize without losing quality before the PNG export. True or false?
View 3 Replies View RelatedCan I use "edit in" in Lightroom to move video clips to premier or premier elements to edit them?
View 17 Replies View RelatedAfter moving a page in my document the master page elements no longer display on screen or in print. If I move the page to a different location in the document the master displays but if it is in the specific position that it needs to be it will not display. The document has multiple Masters and others do work on the page but the one that I need will not. I've tried deleting the page and adding a new one and that does not fix the problem. I've checked and "Hide Master Items" is not checked. The page in question is in position 48 with F-Master applied. If I move it to position 49 it works, 50, it works, 51, or any other it works. If I apply a different master to the page, it works. If I delete the page, add a new page and apply F-Master it still does not work. The only page that this problem is happening on is page 48.
View 1 Replies View RelatedTrying to set up a datamerge file to create multi page spread documents with fields on different pages. Attempting to set it up so it's as automated as possible as there are up to 20 different merge documents needing to merge with up to 100 different csv records from the same file each week . The merge documents have different and repeated merge fields on most pages.
I've set it up so that the document has facing pages, and most pages have images spread across the whole of the spread. the pages preview fine, they are created ok when using 'Create Merged Document' although the page numbers continue from one document to another (another problem). but when I come to export to pdf, then the merge only shows the image on the left spread but on both left and right spread single pages, and the page numbers don't show the correct page numbers eg it will go p1 p2 p1 p2 etc all the way through the document instead of p1 p2 p3 - p20 etc. I don't want to have to merge first then pdf but can't understand why the images and page numbers are not showing correctly.
If it's a bug, then I cannot believe it wasn't caught before the release. So here it is. I simply put artistic text down on page 1. Select the text and copy to clipboard. Add a new page and paste the text. On my computer, the text changes from artistic text (as copied to clipboard) to paragraph default text left justified across the center of the page. It doesn't matter how much text I select, it always pastes on the new page as paragraph text left justified and across the center of the page.
However, if I select artistic text and any other object, copy and paste to a new sheet, it works erectly. Apparently, I now have to select text and an object to insure that the paste feature works properly?
I am guessing this will be a no but is there a way to change page setup for more than 1 page at a time? I have multiple pages in a drawing that I want to change to all the same page setup.
View 3 Replies View RelatedThis was very easy to do in earlier versions of Illustrator, but now it seems like the only option is to make a separate artboard for each page tile!
View 1 Replies View Relatedhow to get the page count of a multi page PDF file? I know you can then open each page using the PDFFileOptions (pagetoopen). But I need to know up front how many pages there are to loop thru to open each page and process each page.
View 8 Replies View Related