Is there anyway to have my credits roll on the screen from the bottom but have the fade out in the middle of the screen instead of going all the way to the top?
View 20 RepliesHow can I make rolling credits at the end?
View 4 Replies View RelatedI'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
I did something and I'm not sure what. But my selection tool has changed. Now when I try to alter the length of a clip in a timeline, it automatically switches to the rolling edit tool with the 2 arrows on either side of a line. If I try to just grab the end of a clip it also drags the end of the clip beside it as well. It affects inserts and almost anything I do. I can't figure out how to return my selection tool to normal.
View 2 Replies View RelatedWhen clicking on Import, instead of the usual tool bar across the top of the screen, as I've seen in many videos, I get a very large bar across the middle of the screen. There probably is a toggel somewhere that allows you toswitche back and forth between the large bar and the normal one at the top. I have been watching a number of videos trying to learn LR but have not come across this issue/option. Currently, I have always moved my photos into a folder on an external drive and then inport to LR. Is that the problem?
View 7 Replies View RelatedI need to fade a music track in and out but I'm not able to add keyfrmaes with the pen tool. And the Add Keyframe button next to the audio track in sequence is greyed out.
View 5 Replies View Relatedis there any entity stutas for selecting?like use mouse select? But do'nt use mouse to select.
View 1 Replies View RelatedWe have several tool palettes that I use all the time. And every time I close down AutoCAD and open it back up, all the palettes load back up in the middle of my left monitor (dual monitor set up). I typically have my AutoCAD window open on the left monitor, and my palettes on the right monitor.
I have tried to save my profile, lock all Toolbar/Palette positions.....and nothing has any affect. My palettes always load in the middle of my left monitor.
I tried loading the latest graphics drivers, no affect.
I want to show one entity middle of the screen and highlight it? Maybe use zoom?
View 2 Replies View RelatedWhat are the blank gray screen with a box in the middle? Is a photo missing and if so how do I find the photo?
View 1 Replies View RelatedCross dissolve will not fade out clips correctly. It gets down to 10-15% opacity on the last frame and that's the lowest it goes. During playback, you can see how abrupt the fade is.
Ticking the "Composite in Linear Color" sometimes improves it, but it's still not a smooth fade. Why is it that I can manually add opacity keyframes to fix this problem (regardless of "comp"), but cross dissolve cannot do a smooth fade?
The following are screenshots of the last frame before the clip ends. The cross dissolve is 30 frames long.My system is i5, 560GTX, CUDA enabled, PP CC 7.2.1, Windows 8.1.
-White background, last frame, Composite not enabled:
-White background, last frame, Composite ENABLED:
With a white background, comp enabled is a bit better, but you can still see the content. I'd expect another frame or two before a complete fade. Black background, last frame, Composite not enabled:
Again, I'd expect another frame or two before total darkness. Oddly enough, after adding and deleting opacity keyframes and switching comp on and off, I managed to get a nice smooth fade with comp OFF with the above example. Some kind of bug? Can't seem to duplicate it yet.Black background, last frame, Composite ENABLED:
With the default black background, having comp enabled makes it WORSE. This has been happening since 2011, here's a thread over on the Creative Cow forum talking about the same issue: (and I know there's threads here on the Adobe forum talking about it too)URL....
I'm making a video with mostly titles. I have found the video transitions to be very choppy, so I've opted to control the opacity fade of each individual title, creating keyframes that move from 0%-100% then back 100%-0%. This simulates a nice fade from black, fade to black effect. However, when i do this all of the text in my titles pixelates.
View 2 Replies View Related have had the good fortune to have recieved a Christmas present (o.k. to myself) a new Dell 30" monitor with 2560 x 1600 resolution.
The only thing I am finding troublesome as you might be able to see by the attached screen shot, is that now my autocad menus are, as expected at the top of the screen. This new size of monitor brings with it the problem that you now have to travel your mouse a great distance to reach the menu bar items.
way of opening images in CS2 where after opening they will appear in the middle of the CS screen rather then in the top left corner?
I can drag and maximize so they appear in the middle, but on reopening another image they default to the top left again, I would like them to always open in the middle?
I'm trying to re-create the effect that Guy Ritchie uses in the Intro to the movie snatch.
I'm trying to recreate the effect where the movie pauses on a character, the colours change and the guys name comes up.
(P7). All of a sudden I can't open it! It starts to load and just as it finishes the credits, it closes automatically!
I already rebooted several times.
I'm new to Ai, and I'm working off of a 2 column end movie credit scroll with a space between them.
The formatting/alignment is fine and I simply need to replace the names in each column. However, the text is not behaving how I'd like it to. When I type text in the left column, I'd like the text to move to the left, but when I type it goes to the right (into the middle space), pushes the text in the other column to the right and messes up the formatting.
Is there a setting or way to make the text go to the left?
I've got Premiere Pro CS6 and I've started testing the use of x264 with Dxtory. The problem I face is that the footage is incompatible with every sequence preset (as far as I know) apart from AVC Intra 100 (AVC Intra 100 1080p 30fps is the one I'm trying to use). However when I use this preset all that the preview gives me is a black screen wheras the audio is playing perfectly. This isn't urgent as it's always possible to just convert the footage to MP4 with Handbrake however not being able to use this codec would be a shame, especially since I've seen others using it
View 4 Replies View RelatedComing from a FCP background, and I see this in FCP and in AVID, but I can't seem to do it in premiere, though I really want to. I want a multi monitor set up where the first monitor has my timeline, source window, and project window, then my second monitor has my bins & effects & metadata, then the third will be a full screen of the project window that is still on my first monitor, and then finally a fourth, 65" 4k tv also displaying the project window (mirroring the third monitor). Dragging the project window around and toggling in and out of fullscreen is a waist of time since there was no need to do that with FCP for so many years. I need 3 project windows in premiere (and I dont mean using the reference) , how do I do this with premiere?
View 1 Replies View RelatedI've seen plenty of tutorials on how to blur out faces that stay within the frame, and these tutorials only showed demonstrations on short clips of one scene. What i am trying to do is blur out faces of people that appear on the video and then leave the frame, and there are other people that show up later in the video that i want to blur out as well. Would the blur remain on the video when the person leaves, and is there a way to have blurs for multiple faces that come up throughout the video?
View 2 Replies View Relatedcan simple fade into slow motion or fade out of the effect ?
View 5 Replies View RelatedI'm using Premiere Pro CC on Windows 7. I previously was able to import and edit clips via exactly the same workflow - but now, not matter what clips I import, they all appear as the 'white screen'. The thumbnail is a frame of the video, but as soon as I mouse over, scrub, or try to play the clip, it turns totally white. Audio will play fine though.
I'm almost positive it has to do with using an AOC display that plugs in via USB. This is based on a similar issue I had using that display on a Mac and having part of a Blackmagic Design software UI not appear while using that screen.
I've tried lots of things, including updating the driver for my graphics card, from the manufacturer's site. I can try - especially a way to undo whatever was done when I plugged in that USB display (worked without manually installing any drivers).
We thinking about buying Adobe Premiere Pro for production of movies shown as LED banners on sport arenas. We need to make a customised projects and sequenses where 20 small movies are shown on the screen at the same time. Full screen has a solution on 2560 x 1120 px. Each small movie has a solution on 1280 x 112 px. The 20 movies filles up the total screen. Is this posible and an eacy thing to do in Adobe Premiere Pro?
View 2 Replies View RelatedI shoot in 16:9 on the canon t3i, however when I upload my videos to YouTube there is a black bar on the left and right. The canon team said there should be a setting in premiere to make my videos full screen.
View 13 Replies View RelatedMy PC will crash when attempting to export in Premiere Pro, I will get the blue screen.
I ran a memory diagnostic test to see if it was the ram, it did not come back as having faulty ram.
Somtimes the pc will just freeze too.
Seems like this only happens with adobe.
I somtimes could export a file after attempting 2-3 times but now it crashes almost every time.
I have tried many different export formats but it seems to not be limited to just one format, it happens with all formats.
I have tried to find a solution but I still have not.
Here are my PC specs:
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name
System Manufacturer To Be Filled By O.E.M.
System Model To Be Filled By O.E.M.
System Type x64-based PC
Processor AMD A6-3670 APU with Radeon(tm) HD Graphics, 3000 Mhz, 4 Core(s), 4 Logical Processor(s)
[code]....
I get a black capture screen when capturing with CS6 on a Windows 7 machine. I'm capturing through Fire wire from DV tape, via the VCR function of a Canon XL2 camera. I have tried restarting, etc.; also toggled the "preview video" radio from the Settings button in the capture Window. Nothing works and I need to be able to preview my video as I'm capturing. It is not good enough that the video actually captures fine. Also, I am forced to turn off Device Control in order to capture because it kicks me out of every capture (an immediate message of : "no frames captured") unless I do.
View 4 Replies View RelatedI have an Image which I had wanted to add text that will be rotating across the image. The Image itself should be static. For example I have a static picture of a car, and I want a dynamic rotating text displaying, buy now pay in 5 years including free garage service.
View 2 Replies View RelatedI want to create a hole on a golf course and need to be able to add some gentle rolling effects to the fairway layer so it doesn't look flat. Can PS6 do this? I do not currently have CS6 extended but could get it if needed. I was thinking maybe some kind of wire frame and then it could generate some hightlights and shadows based on that frame?
I know nothing about 3d but from what I do know that is what came to mind. Right now I'm doing it with the burn and dodge tools and other similar methods but it's time consuming.
An interesting problem for all you inventor users.I have a design where a tube/pipe requires a series of holes at a specific dia and triangular pitch is required to be modeled.
If one can imagine a flat piece of sheet steel ie standard perforated sheet which is then rolled to form a pipe/tube to a specific dia then this is what is required.
Is it possible to model this in inventor say as a flat sheet with given thickness and a specific no of holes at a given pitch, this then to be rolled,obviously the development of the sheet to be correct for the pipe od.ie 3.142 x dia.
Is there a function in inventor to enable this,the alternative being a very long winded method of modeling the pipe and then adding holes.
I need to reproduce wavy contour (blueprint) lines which will follow the undulating landscape on a lot of images I have. As per the attachment, they almost have a neon glow and are in a grid format. I can do a grid but adding the wave filter doesn't allow me to adapt it to suit the pic.
View 1 Replies View RelatedI am new in using sheet metal.So far i am able to form a cylinder made out of sheet metal and i am able to unfold it.The only problem is i want the two ends of the flat sheet to overlap so that it can be bolted together like a lap joint orientation. How to perform this function using metal sheet ipt?
View 9 Replies View Related