Premiere Pro :: Black Screen While Using X264 With AVC Intra 100
Jan 6, 2014
I've got Premiere Pro CS6 and I've started testing the use of x264 with Dxtory. The problem I face is that the footage is incompatible with every sequence preset (as far as I know) apart from AVC Intra 100 (AVC Intra 100 1080p 30fps is the one I'm trying to use). However when I use this preset all that the preview gives me is a black screen wheras the audio is playing perfectly. This isn't urgent as it's always possible to just convert the footage to MP4 with Handbrake however not being able to use this codec would be a shame, especially since I've seen others using it
View 4 Replies
ADVERTISEMENT
Feb 17, 2014
I get a black capture screen when capturing with CS6 on a Windows 7 machine. I'm capturing through Fire wire from DV tape, via the VCR function of a Canon XL2 camera. I have tried restarting, etc.; also toggled the "preview video" radio from the Settings button in the capture Window. Nothing works and I need to be able to preview my video as I'm capturing. It is not good enough that the video actually captures fine. Also, I am forced to turn off Device Control in order to capture because it kicks me out of every capture (an immediate message of : "no frames captured") unless I do.
View 4 Replies
View Related
Apr 14, 2014
Syncing in plural eyes is good with our pro res files, but when I try and sync with some mp3 files from a zoom h1 recorder it goes black at the bottom of the timeline and responds really buggy.
View 1 Replies
View Related
Jun 24, 2013
What do I do? Everytime I am working in Photoshop my screen flashes black, and the entire image goes black.
View 2 Replies
View Related
Apr 13, 2011
We're having an issue loading avc-intra clips. The audio is coming in fine but we only get black for video.
View 1 Replies
View Related
May 30, 2013
I am trying to do 2-pass encoding on 640 x 480 Mjpeg.avi 30 fps clips using the free x264vfw codec. The first pass works ok. But when I change the codec config to Multi-pass, I get an error message when I click ok to save it.
View 1 Replies
View Related
Feb 22, 2014
I have just purchased this upgrade software having used XARA Xtreme4.0 for many years.How can I change the black background screen with white writing to grey with black writing?
View 9 Replies
View Related
Mar 17, 2014
I have created 3 different sequences, and placed a clip into each one. I went into #s 1 and 2, and added a dip to black transition to the end of the clip in each. When I went to #3, I was unable to add the dip to the clip in there. Dragging the transition to the clip on the timeline gave me a had with a circle + slash. Double clicking the transition wit hteh clip selected did nothing. The layer is not locked.
View 5 Replies
View Related
Feb 5, 2014
I have been attempting to export a video from both Premiere and Media encoder in the H.264 codec and it continually discards the final few seconds of black frames. I have tried placing black video there, but it doesn't make a difference.
View 6 Replies
View Related
Feb 3, 2014
I have a black magic and have problems setting the sound properly in PR to get the sound out through the black magic. Although settings seem to have been done properly, there is no sound coming out. When I start the setting again, most of the time the settings have automatically changed and are not on the black magic anymore.
View 1 Replies
View Related
Apr 8, 2014
Coming from a FCP background, and I see this in FCP and in AVID, but I can't seem to do it in premiere, though I really want to. I want a multi monitor set up where the first monitor has my timeline, source window, and project window, then my second monitor has my bins & effects & metadata, then the third will be a full screen of the project window that is still on my first monitor, and then finally a fourth, 65" 4k tv also displaying the project window (mirroring the third monitor). Dragging the project window around and toggling in and out of fullscreen is a waist of time since there was no need to do that with FCP for so many years. I need 3 project windows in premiere (and I dont mean using the reference) , how do I do this with premiere?
View 1 Replies
View Related
Mar 20, 2014
I've seen plenty of tutorials on how to blur out faces that stay within the frame, and these tutorials only showed demonstrations on short clips of one scene. What i am trying to do is blur out faces of people that appear on the video and then leave the frame, and there are other people that show up later in the video that i want to blur out as well. Would the blur remain on the video when the person leaves, and is there a way to have blurs for multiple faces that come up throughout the video?
View 2 Replies
View Related
Mar 26, 2014
I keed capturing video at 24 fps. I would rather be at 29.97 fps. How do I get to that level. The black magic is set to NTSC.
View 2 Replies
View Related
Apr 19, 2014
I made my timelapse movie in quicktime then imported it into my premiere pro cc sequence and there are black borders all around it whilst the other clips are fine and in the format i want the movie to be shown in.
View 3 Replies
View Related
Jan 30, 2014
I'm using Premiere Pro CC on Windows 7. I previously was able to import and edit clips via exactly the same workflow - but now, not matter what clips I import, they all appear as the 'white screen'. The thumbnail is a frame of the video, but as soon as I mouse over, scrub, or try to play the clip, it turns totally white. Audio will play fine though.
I'm almost positive it has to do with using an AOC display that plugs in via USB. This is based on a similar issue I had using that display on a Mac and having part of a Blackmagic Design software UI not appear while using that screen.
I've tried lots of things, including updating the driver for my graphics card, from the manufacturer's site. I can try - especially a way to undo whatever was done when I plugged in that USB display (worked without manually installing any drivers).
View 5 Replies
View Related
Dec 17, 2013
Is there anyway to have my credits roll on the screen from the bottom but have the fade out in the middle of the screen instead of going all the way to the top?
View 20 Replies
View Related
Mar 11, 2014
We thinking about buying Adobe Premiere Pro for production of movies shown as LED banners on sport arenas. We need to make a customised projects and sequenses where 20 small movies are shown on the screen at the same time. Full screen has a solution on 2560 x 1120 px. Each small movie has a solution on 1280 x 112 px. The 20 movies filles up the total screen. Is this posible and an eacy thing to do in Adobe Premiere Pro?
View 2 Replies
View Related
Feb 24, 2014
I shoot in 16:9 on the canon t3i, however when I upload my videos to YouTube there is a black bar on the left and right. The canon team said there should be a setting in premiere to make my videos full screen.
View 13 Replies
View Related
May 23, 2008
I had the problem of a Black screen in the LAB mode with the new camera raw (4.4.1.85) and CS3 10.0.1. I am running Windows XP with a RADEON 9000 graphics card. I am finally rid of it.
I right clicked the Desktop then properties. Settings. Advanced. Troubleshoot. I unchecked the option there (but that was not necessary as I added it back later) but what made a difference was to reduced the Hardware Acceleration by one notch. The problem is gone.
View 2 Replies
View Related
Jun 29, 2012
I am having trouble with the ram player in 3ds max 2013. I am using vray to render and when i try to load the last render into the ram player i just receive a black screen, although the dialogue beneath is consistent with render time,frame name etc.
View 1 Replies
View Related
Feb 19, 2014
i have a black magic declink studio on my hp workstation Z600 and im working on a premiere cs project and wanted to watch on a external monitor , when going to preferences playback setting black magic isn't appearing as an option but in audio hardware it is!!
View 3 Replies
View Related
Mar 1, 2014
How to remove a partial black frame at end of video sequence? 1/8 of end frame is black. I inserted last clip on timeline and it ends with this last scene with 1/8th vertical black bar. I just need to know how to stretch out that last frame to get rid of the black so the whole image is there without messing up the audio file.
View 2 Replies
View Related
Nov 12, 2013
Is there a method to get the Pocket Camera CinemaDNG files to work in premiere ? (or Speed grade?) They work as individual frames in Photoshop. Apparently they are "compressed" CinemaDNG files.
View 28 Replies
View Related
Jan 27, 2014
My PC will crash when attempting to export in Premiere Pro, I will get the blue screen.
I ran a memory diagnostic test to see if it was the ram, it did not come back as having faulty ram.
Somtimes the pc will just freeze too.
Seems like this only happens with adobe.
I somtimes could export a file after attempting 2-3 times but now it crashes almost every time.
I have tried many different export formats but it seems to not be limited to just one format, it happens with all formats.
I have tried to find a solution but I still have not.
Here are my PC specs:
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name
System Manufacturer To Be Filled By O.E.M.
System Model To Be Filled By O.E.M.
System Type x64-based PC
Processor AMD A6-3670 APU with Radeon(tm) HD Graphics, 3000 Mhz, 4 Core(s), 4 Logical Processor(s)
[code]....
View 2 Replies
View Related
Dec 27, 2012
I'm trying to draw on CS6 and the screen keeps flickering Black, I've tried to switch off using the graphics card and switching to Basic mode, that hasn't worked.
OS: Win 8
Intel R HD Graphics 3000
4GB RAM
View 2 Replies
View Related
Dec 18, 2012
Why does my screen keep flashing black in Photoshop CS6 when I am working on an image?
View 3 Replies
View Related
Feb 18, 2013
Ive booted my computer up and started Photoshop. i use a second screen, its installed automatically on Mac OSX 1.8. Now, when i drag the file to th second screen, it appears to become black. if i drag it back to my Home-Screen, the content appears. Resizing don't change anything as well as disable the graphic processor on Photoshop.
A second restart solves the issue. but i don't want to restart my machine every time when i work on Photoshop.
View 3 Replies
View Related
Sep 22, 2013
Black screen when adjusting anything in Photoshop cc. Windows 8.
View 3 Replies
View Related
May 30, 2013
I only installed Photoshop last week, the screen goes black almost constantly and I have to click a few buttons for it to suddenly reappear. Its running on Windows 8.
View 3 Replies
View Related
Feb 19, 2011
I have imported 3 tapes full of HDV and I am now editing them.
While editing the screen goes black unless I am actually playing it so cannot skip frame forwards and backwards.
View 1 Replies
View Related
Aug 18, 2013
whenever I open my 3ds Max software I get a black screen in my perspective viewport. When I go to use another viewport that one either turns black as well or the program freezes. I have been using this software for the past month or so with no such problems. Now, out of the blue, this happens. I wasn't using any other programs while running 3ds Max, I never do--just incase.
View 2 Replies
View Related
