I made my timelapse movie in quicktime then imported it into my premiere pro cc sequence and there are black borders all around it whilst the other clips are fine and in the format i want the movie to be shown in.
View 3 RepliesI m trying to render a time lapse video on PS CS4 and the process works well up until the export window. When i go there the first option under file options, quick time export, is unavailable( grayed out). The only available option is Image sequence. What do i have to do to enable the quicktime movie creation or any other movie format for that matter?
View 2 Replies View RelatedI'm putting together a timelapse movie with about 6K stills. I have them gathered in groups of 600. They're all about 4 megs. I'm taking them into a sequence at 24 fps. Why is my clip coming in at about 6 sec's? Then another group of 600 stills coming in at .04 sec's?
View 7 Replies View RelatedI shot 887 images to make a time lapse video. I adjusted all frames in LR5 ( including removal of dust spots on lens. I was on a moving boat) only to find out that time lapse info I was using was from LR3 and the ability for time lapse no longer existed in LR6. I can use the video editing in Photoshop by going through Bridge but I loose all of the corrections made in LR. Is there a way to use the images with the LR5 corrections?
View 1 Replies View RelatedDownloaded the trial VS x6 Pro and am loving it. Been working on a project and wondering if there is a way to do time lapse of video footage. The variable speed is not fast enough for my liking and what to speed things up a little more.
View 1 Replies View RelatedI'm playing around with time lapses in VS5 and am having some success. One thing I can't work out though is how I go about adding Pan &/or Zoom to a sequence. I can add it to individual images but i'm not sure how to add the effect over a series of say 300 images so that it's a smooth motion?
View 14 Replies View RelatedI wish to use the Speed TimeLapse effect (actually slow motion) I have a clip that last approx 8 min I would like to "slow motion" only a portion of the clip approx 20 sec. Is it possible to apply the effect without having to cut/trim the original clip. The clip properties are as follows;
ntsc/hdmv
H.264 Video
Upper Field First ;1920/1080
16:9 ;24bits;29.97 fps
Audio
5.1 Dolby Digital
I'm doing a time-lapse in Lightroom 5 and understand all the steps expect the one towards the end which deals with the Template Browser. From my understanding in order to export my time-lapse video as a video I will need to downlaod a free plug-in. Explain the IRTimelapse software and do I have to buy this on top of the Lightroom 5 as well?
View 3 Replies View RelatedWill lightroom be able to put together a time-lapse, after I shoot it, or do I need to do in Elements 10, or another program?After I finish editing a photograph, I want to put only edited photographs in a new catalog.
View 9 Replies View RelatedI have been tasked with creating a time lapse video of a building being built. I have been supplied with the time lapse pictures that go back over 18 months so there are a large number of files.
The problem I have is the pictures were taken by a motorized web cam - basically it took a picture to the left, move about 40 degrees take a picture straight then another 40 degrees and took a picture right to fit the whol building in. 3 shots were taken a minute so for every minute there is the whole building.
When initially looking at the 3 seperate shots it looks like it would be fine for them to line up BUT there is a problem. The left and middle pictures have a small amount of overlap and can be automatically stiched together BUT the picture on the right will but up but has no overlap, is there anyway I can automate 2 different functions on the 3 pictures or do a 2 step automation that would firstly stitch the left and middle pic then but up the right pic to the joined images already stitched.
I've read thru most of the historial threads regarding making time lapse videos using VS X4. I am very happy with the normal videos what I have been able to produce using VS X4, however I am missing something when it comes to time lapse using stills taken with a GoPro Hero2 taken every 2 seconds in time lapse mode. The still images look sharp and clear in my photo editing software, but lose focus and sharpness when imported into VS X4 using Insert photo into Timeline for Time lapse/strobe. a process to improve the quality of my time lapse video I am making for our Boy Scout Troop packing up their campsite on a beautiful spring morning.
View 1 Replies View RelatedFirst I love the way the VS Pro X4 do time-lapse! the question that I have is that I have a web camera for my job which is a IQEYE camera which take JPG snap shots, but these snap shots are put in folders by days and time. an example is like one folder would be May and inside that folder would be the day & inside the folder would be the hour then minutes. how can i input these folders into VS Pro x4 and make a time-lapse? because when I use Adobe Premiere Pro Cs3 or Cs5 I can input the folders into the program and make a time-lapse video. can this be done in VS Pro X4? I just check one folder for May and inside that folder is 139 files
View 2 Replies View RelatedI'm trying to make a time-lapse video from pictures I took of my kid.
The photos aren't well aligned, so I had tried the jpegs as multiple layers. I cropped, rotated, and scaled each successive picture so that it would be best aligned with the previous one. I then tried saving as a gif. The colors were messed up due to the color conversion. If I could export as a video format, that would be ideal, then I wouldn't have to convert the colors and could compress the file. I'm using windows 7, 64 bit, and GIMP 2.6, GAP didn't seem compatible with windows 7.
There are quite a few photos that I'm aligning, so the layers method seems the easiest. There are other programs which could take the aligned pictures individually and put them together, but I'd need a way to export the layers as individual files.
Lastly, I'd like to see what "morphing" one picture to the next would look like. I assume that would depend on what method I use to put the photos together.
Why isn't there support for making a time lapse video from a sequence of stills? Perhaps with some motion effects like zoom and pan. im amazed that this is not in lightroom.
View 5 Replies View RelatedI'm working on a time-lapse project where I have taken 240 shots of a highway heading into my city, and have erased the cars from the shot, creating the look of an "empty city". This will be one of many sequences like this.
I got the highway background plate perfect, no cars, and I threw that into my AE comp (CS6), along with the 240 images as a JPEG sequence. I've layered the background plate on top of the image sequence and used a mask to "hide" the cars from the highway. The problem is, some of the cars are taller than the roadway (trucks, busses, etc), so they push into the upper part of the frame where the motion is supposed to happen. If I extend the mask upward, you can see a literal bisection between the still plate and the animated JPEGs. If I just move the mask path to hide cars as they go by, the moving mask becomes VERY obvious in the exported QuickTime.
I am having problems with importing still images into a time lapse sequence in photoshop.I want to create a time lapse using a sequence of still photographs. All file names are sequentially name/numbered.
I am using the Motion workspace, and have followed all of the instructions available. Create correct sized new document (film & video).Create video timeline. Set frame rate. Choose 'create new video layer from file'.Point to first image in the folder where the images are stored. At this point, no matter what I have tried, I receive this error:
I have tried different sized new documents; tried jpegs and tiffs; tried different frame rates, tried different qualities and sizes of images; tried selecting the last image instead of the first (one recommendation).
If I use the 'Place' command from the file menu (and check the 'image sequence' box) instead of selecting 'Create new video layer' from the layers panel, it loads fine and I can still render the video.
It took me most of a day to discover this workaround, but every other reasonable 'how-to' that I can find says that I should be able to do it by opening files into a new video layer and it seems as though the new video layer option may give me more alternatives.
I have reset Photoshop, deleted the settings file, even reinstalled it. I use 64-bit on windows 7 and even installed the 32-bit to try that, but all with the same result.
I have a video recording of an event with not so good audio, but also a separate high quality audio recording. The problem is that the audio recordign speed is not the perfect match to the video recording, and when I put them in overlap, audio runs about 2-3 seconds quicker than the video by the end; seems real bad.
the obvious solution is to adjust the speed of the audio to match the length of the video; sounds easy.
One small problem is that the audio recording and the video recording were not perfectly synced, so the audio has some superfluous part at the end, so all in all the situation is as below:
Video track length: 1:57:16
Audio track length 2:14:20 with a lot of wasted part at the end
Current length of the Desirable Audio track: 1:55:15; this is the part which should in fact finish at 1:57:16 to match the video.
Below is what I did:
1- Clipped the audio at 1:55:15, Let us call the first part of the audio (the desirable one) Audio A, and the remaining part, Audio B
2- Deleted Audio B from the audio track
3- Pressed shift and dragged Audio to match the length of the video hoping that it will speed the audio track perfectly to cover the 2 seconds gap
4- Played the audio clip to see if it worked; Result: weird. Instead of keeping the track contents as it is and only changing the speed, it somehow resurrected some contents from the Audio B. I thought I had deleted that . So now it plays the same length as the video, but with added audio contents at the end, so the problem remains where it was.
5- Pressed undo, to instead try the Speed / time-lapse dialog on Audio A. Right clicked audio A, clicked on Speed / Time-lapse and entered the time for which it should play directly.
6- played the audio clip to see if it worked; Result: same as 4.
7- Pressed undo again, and tried reducing the speed this time instead of entering the exact time manually. Even 99% stretched the video way beyond the length of the video (as I expected) but strangely enough the contents from the deleted Audio B are still appended at the end.
8- This time tried to shrink the stretched audio to the length of the video by using Shift+drag. And it works perfectly for the stretched clip, but that had the audio contents from Audio B anyway. So the result is exactly the same as 4 & 6
.
9- Trying to delete the unwanted audio bits at the end of Audio A from Audio B, and then stretching the Audio A to the right length actually reduces the Audio A further down, deleting some part of the wanted audio too :S ... thus just turning the problem upside down ..
I am using Corel videoStudio X5 Pro with Service pack 1.
I just had my gopro take 377 pictures over a few hours (30 seconds apart) and imported them all into the timeline. What I want to do is compress all these to a time frame somewhere around 1-1:30 or so just for a short clip of clouds moving across the sky. This is easy enough to do by selecting them all and bulk changing the duration to some fraction of a second. The problem is that it was quite breezy so the movement of the tree branches from one frame to another make it more "jerky" than I want when playing back.
Is there some way to smooth this out, I was thinking a real short fade transition between each frame, but that would take a month of Sundays and I don't know if I can get the transition short enough. I tried importing with default transition to cross-fade but the transition was way too long.
I have been taking pictures (like 20+) of our new house that has been being built over time. I was taking them while standing in the exact same spot across the street, and trying to line them up the same, but of course they are not perfect. Is there a program/script that will take pictures and line them up together like by user selecting 4 common points and then it will resize/skew each picture to line up those 4 points, and hence the picture?
View 1 Replies View RelatedI have been taking pictures (like 20+) of our new house that has been being built over time. I was taking them while standing in the exact same spot across the street, and trying to line them up the same, but of course they are not perfect. Is there a program/script that will take pictures and line them up together like by user selecting 4 common points and then it will resize/skew each picture to line up those 4 points, and hence the picture?
View 2 Replies View RelatedWhen i´m rendering out a video with still images (timelapse) i use Timewarp. I like to have Timewarp at 50%, but then i only get rendered half the images. If i have 500 images, only 250 gets rendered to the final QT-video. There must be a way to get all images in the video??
View 13 Replies View RelatedI took 650 pictures to make a stop motion animation, then imported the pictures to the time line, then selected the "video", then right clicked to time-lapse the video, and the time lapse is grayed out.
View 14 Replies View RelatedI experimented with slow motion of a water fall video clip from Letchworth State Park of New York where we visited recently. The original clip is 1080p24fps. I used virtualdub, avisynth, mvtools method to change the video clip from 24fps to 96fps, and 144fps. This method smoothly builds additional frames between each of the 24fps appropriately and the method works great to create smooth slow motion that plays in VLC slowing the 96 and 144 clips fluidly slow. Inserting the three clips into VS works fine and play normally. Selecting the inserted 96fps clip, and slowing it by 25% plays jerky, and renders as 1080p24fps the same way. Same situation with the 144fps clip. I played with all the parameters: frame and % and I could not make VS X4 play the clips smoothly. I am hoping I don't understand how to use this new Time lapse/Speed feature. BTW, I also own Premiere Pro, and it does the slow down of these clips perfectly. You can see the three clips in VIMEO done with Premiere Pro: [URL]
EDIT: I just tried Microsoft Movie Maker that comes free from Microsoft, and it does the slow down correctly. I am thinking this is a problem with VS X4
I imported a number of Powerpoint slides into VideoStudio Pro X6 and am now recording voice audio for them. My problem is: I don't know how to stretch each slide's duration to match its audio. By default, all the slides came in with a 3 sec duration. I can increase each to a max of 6 sec, but that's not long enough for my audio.
I've dug around the internet and watched tutorials on Corel's site, but they don't work. Everything I've looked at (even page 60 in the User's Guide for X5) says that to change a photo's duration, double-click it and select "Speed/Time-Lapse" on the Edit screen.
When I double-click a photo, there isn't a "Speed/Time-Lapse" option on my Edit screen (see image). So how am I supposed to change the slide's duration?
I am trying to create a time lapse video and need all my photos lined up perfectly before i start, (all photos are quite close but not exact) is there any way i can select a certain point in photos eg the eyes, mouth and line them all up. i have about 30 photos. i am using photoshop elements 12.
View 2 Replies View RelatedI have a problem with After Effects being unable to process image files in the correct order when making time-lapse videos.AE seems unable to identify the correct chronological order from the camera generated file names and the files need to be re-numbered with a number prefix.
However sometimes even after re-numbering AE still cannot order the files correctly and will generate a video with either individual or blocks of frames out of order.
I have another app (Video Velocity) that can also suffer exactly the same problem and which will often process a video with the exact same individual or blocks of frames out of order as AE.
However VV has options to order the files in various ways including ‘sort by file create date’ in which case the time-lapse video will be processed correctly. AE doesn’t seem to have this option? Or does it?
I'm talking about the movie icon/preview picture you see in explorer when you're looking at the movie.
I want to select what it shows, kinda like how you can select a thumbnail on youtube when you upload a video.
I finished my movie and cannot seem to find a way to get this burned successfully to a DVD. Encore did not download with my month purchase of premiere pro cc and when I open the creative cloud there is not additional options to download encore. I have tried exporting the media to a MPEG-2 DVD file however, windows media player cannot seem to open that file and I have not been able to successfully burn it to a disc. I just want to burn my movie to a DVD to play on the television
View 10 Replies View RelatedWhenever it gets to 4:40 it just says unknown error compiling movie. I have it exporting to .wmv at 720p 29.97 fps.
View 7 Replies View RelatedAs soon as I click on edit properties of a Crop Borders xf, Pro X4 crashes.
View 1 Replies View RelatedWe thinking about buying Adobe Premiere Pro for production of movies shown as LED banners on sport arenas. We need to make a customised projects and sequenses where 20 small movies are shown on the screen at the same time. Full screen has a solution on 2560 x 1120 px. Each small movie has a solution on 1280 x 112 px. The 20 movies filles up the total screen. Is this posible and an eacy thing to do in Adobe Premiere Pro?
View 2 Replies View Related