Premiere Pro :: Capturing At 24 Fps With Black Magic Decklink Studio
Mar 26, 2014I keed capturing video at 24 fps. I would rather be at 29.97 fps. How do I get to that level. The black magic is set to NTSC.
View 2 Replies
ADVERTISEMENT
Premiere Pro :: Sound Settings Through Black Magic In PR?
Feb 3, 2014I have a black magic and have problems setting the sound properly in PR to get the sound out through the black magic. Although settings seem to have been done properly, there is no sound coming out. When I start the setting again, most of the time the settings have automatically changed and are not on the black magic anymore.
View 1 Replies View RelatedPremiere Pro :: Playback Setting Black Magic Isn't Appearing As An Option
Feb 19, 2014i have a black magic declink studio on my hp workstation Z600 and im working on a premiere cs project and wanted to watch on a external monitor , when going to preferences playback setting black magic isn't appearing as an option but in audio hardware it is!!
View 3 Replies View RelatedPremiere Pro :: Black Magic Pocket Camera / Cinema DNG (compressed)
Nov 12, 2013Is there a method to get the Pocket Camera CinemaDNG files to work in premiere ? (or Speed grade?) They work as individual frames in Photoshop. Apparently they are "compressed" CinemaDNG files.
View 28 Replies View RelatedPremiere Pro :: Adobe Not Allowing Import Of XML File Captured From Media Express Through Black Magic Capture Card
Jan 30, 2014find a way to import the XML files to fix the digitized look Adobe capture gave my footage.
These are not XML from Final Cut. They are files saved from Media Express, a Black magic design program used for Capturing.
Premiere Pro :: Capturing From Beta
Feb 26, 2014Capturing: DV-PAL Widescreen 48kHz from Sony J-30 Beta compact player.This device is equipped with Firewire port.Could not get 16:9 format of captured or preview material.
View 4 Replies View RelatedPremiere Pro :: Prevent Capturing Process From Splitting Up Source Material Into Short Clips?
Feb 11, 2014Capturing: I have a continuous miniDV tape that I am capturing, but Premiere keeps interrupting the capturing and makes short multiple clips...I have tried it with both Scene Detect ON and OFF. I just want the miniDV tape to play and to have one continuous file. How do I prevent the capturing process from splitting up the clip?
View 4 Replies View RelatedPremiere Pro :: Plural Eyes Turning Premiere Timeline Black?
Apr 14, 2014Syncing in plural eyes is good with our pro res files, but when I try and sync with some mp3 files from a zoom h1 recorder it goes black at the bottom of the timeline and responds really buggy.
View 1 Replies View RelatedAfter Effects :: Black Magic And CS6 Ram Preview Not Real Time
Jan 24, 2014I'm on a MAC PRO with the OS 10.6.8 and 8Go Ram, the problem is when i turn on my preview video on the Blackmagic the video monitor is not in real time and the after effect is so slow. When i put it off (computer monitor only) it's ok but i havn't my video monitor of course....and i need it. Is there some tricks for having my black magic (1080 i 50) ON and a RAM Preview in real time ? My drivers Black magic is the 9.5.3 it's the highest driver for MAC OS 10.6.8 + ADOBE CS6+ FCP7. ( i tried update adobe, change qt library, change aspect ratio, pixel, preview ram settings, change drivers black magic and other but nothing work )
View 5 Replies View RelatedPhotoshop :: Whenever Magic Wand Tool Or Anything Used Picture In Document Keeps Flashing Black
Jan 2, 2013whenever i open a document using the magic wand tool the picture in the document keeps flashing black - CS6
View 4 Replies View RelatedPremiere Pro :: Can't Add Dip To Black To Clip
Mar 17, 2014I have created 3 different sequences, and placed a clip into each one. I went into #s 1 and 2, and added a dip to black transition to the end of the clip in each. When I went to #3, I was unable to add the dip to the clip in there. Dragging the transition to the clip on the timeline gave me a had with a circle + slash. Double clicking the transition wit hteh clip selected did nothing. The layer is not locked.
View 5 Replies View RelatedPremiere Pro :: Why Does Exporting In H.264 Discard Black Frames
Feb 5, 2014I have been attempting to export a video from both Premiere and Media encoder in the H.264 codec and it continually discards the final few seconds of black frames. I have tried placing black video there, but it doesn't make a difference.
View 6 Replies View RelatedPremiere Pro :: Black Screen While Using X264 With AVC Intra 100
Jan 6, 2014I've got Premiere Pro CS6 and I've started testing the use of x264 with Dxtory. The problem I face is that the footage is incompatible with every sequence preset (as far as I know) apart from AVC Intra 100 (AVC Intra 100 1080p 30fps is the one I'm trying to use). However when I use this preset all that the preview gives me is a black screen wheras the audio is playing perfectly. This isn't urgent as it's always possible to just convert the footage to MP4 with Handbrake however not being able to use this codec would be a shame, especially since I've seen others using it
View 4 Replies View RelatedPremiere Pro :: Black Borders Around Time-lapse Movie
Apr 19, 2014I made my timelapse movie in quicktime then imported it into my premiere pro cc sequence and there are black borders all around it whilst the other clips are fine and in the format i want the movie to be shown in.
View 3 Replies View RelatedPremiere Pro :: How To Remove A Partial Black Frame At End Of Video Sequence
Mar 1, 2014How to remove a partial black frame at end of video sequence? 1/8 of end frame is black. I inserted last clip on timeline and it ends with this last scene with 1/8th vertical black bar. I just need to know how to stretch out that last frame to get rid of the black so the whole image is there without messing up the audio file.
View 2 Replies View RelatedPremiere Pro :: Get A Black Capture Screen (preview) / But Video Captures Fine
Feb 17, 2014I get a black capture screen when capturing with CS6 on a Windows 7 machine. I'm capturing through Fire wire from DV tape, via the VCR function of a Canon XL2 camera. I have tried restarting, etc.; also toggled the "preview video" radio from the Settings button in the capture Window. Nothing works and I need to be able to preview my video as I'm capturing. It is not good enough that the video actually captures fine. Also, I am forced to turn off Device Control in order to capture because it kicks me out of every capture (an immediate message of : "no frames captured") unless I do.
View 4 Replies View RelatedVideoStudio :: Capturing VHS Not Working?
Sep 5, 2012I'm running X5 on Windows 7 and I'm trying to put a VHS tape to DVD. I have a Winfast VC100 U capturing device with the red white and yellow cables plugged into the VCR. The video plays through X5 (with no sound) and when I press the 'capture video' button, it says its capturing, but in the information box, the available space does not budge. Once I stop the capture and go to the edit screen it has only saved a video of 2 frames. I have never tried to capture a VHS tape before.
My current video settings are:
Input source - Composite
TV System - PAL B
VideoStudio :: Capturing Music From CDs In Pro X3?
Apr 23, 2013When we capture music from CD's in Pro X3, the last few seconds of the songs get cut off. Or the recording skips, cuts out a few seconds of the song right before the end, and then captures the end of the song. It's an intermittent problem with no rhyme nor reason that we can figure out as to which songs are being affected. But once a song has been captured and the end garbled, that same song will always be garbled no matter how many times we delete the recording and recapture it.
View 11 Replies View RelatedVideoStudio :: Capturing From HD Camcorder (JVC)
Nov 26, 2012I have used old tape type camcorder (sony) for 7 years and used firewire cable(1394) to capture the video into my desktop. capturing file format was AVI(DV type 1). It's pretty big size of files but I like this type of file format because there were no compression so that I can keep an uncompressed original DV files. When I captured(download) the video from camcorder, I usually turn power on the camcorder after connect into desktop, then VideoStudio automatically recognized my old SONY camcorder so it's always ready to capture the videos.
BTW, I purchased new HD camcorder (JVC, model jvc gz-e10). I did connect same what I did tape camcorder, but neither my computer nor VSX5 can't recognized to capture. (It just only detect as movable device, i.e. SD card...)
How to capture this video clip from HD camcorder using VideoStudio program? Inside of SD card, captured files have "mts" file extension.
VideoStudio :: 14 Keeps Crashing When Capturing From DV?
Aug 27, 2012Whenever I try to capture anything from VHS > DV > Firewire to my PC VS crashes hard core. Everything freezes and it reboots.
i7-2700K I have Two brand new 4th generation SSD (Vertex 4's) in RAID 0, Read and writes @ 1GB/sec I have 16GB of RAM, 2133, half is a RAMdrive (temp). This reads and writes @ 5GB/sec. I usually write to this because there is no possible chance of bottleneck. Though I've tried SSD or HDD write too. Top of the line everything else, MB, sound, etc. How the hell much more power do I need?
Can't believe the FREE 100Kb WinDV can capture for 8 hours + no hiccups, no lost frames, but the second I try to capture, even go into capture mode with VS14 it starts to stall, crash, choke up and eventually reboot the whole F%^&$%^ machine, leaving my 6TB RAID 5 to have to rebuild.
VideoStudio :: Capturing From Camcorder
Mar 24, 2011I have been using VS for quite a few years firstly with VS6 and currently have X3 (depending on a few things I will probably upgrade to X4).
Up until the present time I have been capturing on my PC at home via fire-wire from my current camcorder (Canon MD 235 which of course uses mini DV) . I want to purchase a new laptop to give me some mobility and also be able to edit produce DVD's on the move, looking around virtually no current laptops (unless I go well beyond my budget (around £500)) have fire-wire or even an express port to use a expansion card with fire-wire.
I realize that I will probably have to step up and get a newer more up to date camcorder over the summer and what I am trying to understand is the difference in capture formats. I like the look of some of the low end Hard drive/flash/SD card camcorders around, but how do you import to PC, is all done by USB?
In what formats is the video imported and how easy in comparison to say Avi files and is it easy to edit video using VS and produce a DVD from the resulting files?
VideoStudio :: Capturing VHS To MPEG?
Oct 25, 2010Capturing VHS to MPEG? Does this tutorial work?
[URL]
VideoStudio :: No Video When Capturing
Oct 19, 2010I have VideoStudio X3 which has been had been running fine, however when I came to use it today I found that although I could capture video from within the capture tap, nothing was displayed on the "monitor" window. I've un-installed and re-installed and still nothing. I can control the tape transport via clicking on the play / pause / rew etc buttons under the monitor window, but there is no picture displayed. To check if this was a fault with the camera / Firewire card I launched Windows Movie maker and that displayed the incoming source without any problem, suggesting this is a VideoStudio issue.
System spec:
Vista Business 32bit
Dual core Pentium running at 2GHZ
4GB RAM
Asus 210 silent (Nvidea) with 1GB RAM
Panasonic NV=GS65 3CCD
Using the monitor on the camera I captured a clip (again nothing displayed within VS) which when placed on the time line played back on the VS monitor, although it was very interlaced with zig-zagy edging on movement.
VideoStudio :: Stop Capturing Video Using Pro X2
Jan 30, 2011We forgot to stop capturing video using VS Pro X2. There is now a file size that is a bit over 337gb. When trying to open that file for editing, an error message pops up [There is no common media type between these pins] (17101:70:2)
I am assuming that this file cannot be opened to remove about 330gb of unwanted data.
VideoStudio :: Video Preview During Capturing From VCR
Oct 6, 2011When i want to record from tv/tuner card from vcr (smi grabber) my preview screen go's black. It records but i only hear the sound. No video preview. But it is recorded with video and audio. When i only play the vcr the video preview works in corel.
View 2 Replies View RelatedVideoStudio :: 8mm Tape Transfer / Capturing?
Jan 10, 2011-I just installed the VideoStudio v10 software and it captures video fine, however I have an issue with the audio. The audio is present but for some reason there is a noticeable static on the video file. Im using a 2000 Sharp ViewCam VL-A10 monaural/analog 8mm camcorder to transfer video to my computer. Im confused because there is NO static on the original 8mm tape, when I play video on the camera, the sound is fine as well as when I plug it in to my TV set for playback. I dont understand where the static is coming from on the digital transfer? Ive tried several capture formats MPEG, DVD, AVI etc. the static is present on all versions. Im using the EasyCAP USB device with A/V plugs for capturing.
View 14 Replies View RelatedVideoStudio :: Capturing Video With ProX4?
Jan 12, 2012I have purchased a Sony DCR TRV480 to play Hi8 tapes and convert to Digital Video. My camera came with a USB cable that plugs into the camera in the video jack. I want to capture the video using VSProX4. What do I need to do to capture it? Do I need a driver for the USB. I dont seem to have a firewire jack on this computer but it does have a 1394 labeled jack in the back. It has several USB jacks.
View 6 Replies View RelatedXara :: Capturing Images From Video?
Jan 11, 2013I have our daughter's Nativity on my hard drive, and wanted to try some image screen capture so that our Playgroup can send a photo to our local newspaper. I have played the video, paused then performed a "Print Screen." I have then pasted that paused image into Xara PGDv7. But seem unable to resize the pasted image. If I try to resize the image, the resizing window just concentrated upon a portion of the pasted image. I thought this would have been straight forward, but it doesn't seem to have worked. Playgroup asked whether I could do this asap.
View 3 Replies View RelatedAutoCAD .NET :: Capturing Escape Key During A Command
Dec 17, 2013I have a vb.net Autocad add-in which runs an iterative routine with a while..wend loop that often takes a few minutes to finish. The routine is very stable and always restores user control eventually, but if the user hits the escape key while it is running, a fatal error occurs in acad.exe.
if there is a way to detect that the escape key has been pressed so the routine is exited?
Photoshop :: Capturing Multiple Signatures And Processing For Later Use
Feb 22, 2012Capture a bunch of signatures to be later used in PS for creating a collage of a sports team...each photo will have the players signature... I'd like to ideally use my i pad to capture and then move to PS where I can associate each signature with a photo, etc. The trick is to work off a list of names and be able to keep the association as a move it to PS...
File Maker Pro / Go combo will do what I want I think but its quite pricey at $150+40...was hoping some other cheaper way was possible. Obviously need to pay attention to transparency issues..Don't want to have to manually delete white backgrounds once imported, etc.
Photoshop :: Capturing Auto-color Settings
Oct 7, 2013Sometimes when working with particularly difficult imaging I'll start with a quick auto-level or auto-color adjustment. More often than not these attempts leave little to be desired and I move on to other techniques. But once and a while (like today's subjects) I'l do an auto-color and the result is good enough to warrant inclusion in an action where I want to apply the exact same settings from that single auto-color step to a few more files.
Trouble is, unlike the levels where you can see what's been done and can save the .alv, there seems to be no equivalent for the auto-color adjustment. Can those settings be saved out?