Photoshop :: Select Target Shadow Color
Apr 21, 2009double clicking on the shadow eyedropper in the curves dialog, I should get to the "Select target shadow color" dialog box. However, I only get a color dialog box.
View 5 Replies
ADVERTISEMENT
Lightroom :: How To Color-correct / Color-match Lot Of Photos To Certain Target
Feb 11, 2012I have something like 1,850 photos, taken in RAW and later converted to DNG, to create a stop motion. All the photos were taken with the same camera (Canon 5D Mk II) and most of them with a 24-70L. All were taken in the same lighting conditions (in an interior, with the house lighting from flourescent lights) and the same day, in a period of maybe 2 or 3 hours. Each "take" was with the exact same camera and exposure parameters.
Â
When processing the photos in Lightroom (using the LR4 beta) I can see some minor but very noticeable differences between color an exposure in the photos of the same "take". The exposure can be more or less automatically corrected by the Matching total exposures (although I think this doesn't work when the exposures are really similar, but there are some subtle differences like in this case, say, something along ~1/5 stop or so), but I haven't found how to try to match the white balance. All of the photos have already been set to a specific WB (I took a ColorChecker Passport at the beginning of the session), but there are still some differences between some of the shots. Some of them look a tad more greener. I blame the flourescent bulbs, but I'm not sure of the real cause.
Â
So, the question is: is there a way to match the color balance of a series of photos to a target one? I really don't want to go photo by photo setting the white balance manually. Is there a tool like the Match total exposures, but for color balance? I have already tried with the automatic white balance, but the problem is that the decided WB for the photos is not the one I need, and I need to have the same WB for all the session, and this could change from different takes. The difference between shots is usually around 4 or 5 "points" in the Tint scale, some are with Tint +11, some with +15.
Â
Or any other tool that could process this after? At the end I'll use JPGs to create the stop motion, so if there is a tool that could process the exported jpgs it could work too.
AutoCAD 2013 :: Adapt Lisp To Allow To Select Multiple Target Blocks To Be Overwritten
Oct 22, 2013I've found a .lsp that does nearly what I require. The lisp that I've got allows you to identify a block, and have another block replace it.
Is it possible to adapt this lisp to allow you to select multiple target blocks to be overwritten?
(defun c:rblk (/ pre nb ss i en ed) (while (or (not pre) (not (snvalid pre)))
(setq pre (getstring "Existing BLOCKs Name Prefix: "))) (while (not nb) (setq nb (getstring "
New BLOCK Name: "))
[Code] .....
In this particular instance, I'm trying to have multiple different door symbols in a 2D plan overwritten with a uniform marker.
GIMP :: Make Color Select Tool To Select Specific Color / Related Shades
Jun 4, 2011Is there a way to make the color select tool not only select a specific color but related shades as well. I have a graphic that is mainly shades of gray but with black outlines and divisions as well as other colors mixed in. I want to shift all the shades of gray to shades of dark yellow without have to select each shade individually.
View 1 Replies View RelatedPhotoshop :: Apply Color Variation Calculated From Target And Source Image
Oct 15, 2013Any way to, have a source color chart, a target color chart, calculate what are the variations between them, and then use that to apply it to another image? I'm not talking about "match color", I know how that works, but is not what I'm looking for. It can be compared to switching to a custom color profile (calculated by the variation of source and target). Or something like "color lookup" (but with a custom icc/icm/lut). Creating a custom icc has been really complicated for me, and I still can't get it to work. (I have the icc profile, but can't open it nor from "convert profile" nor from "color lookup").
View 9 Replies View RelatedPhotoshop :: Color Select Via Wand Select?
Apr 27, 2012I have two questions for CS4, which may not be possible, and I didn't find in the feature forums.Â
Â
1) Is there a way to do a color range selection created from all the colors that were selected from the magic wand tool. See attached image one.
Â
2) Is there a way to crop an image based on histogram? For example if I wanted to remove all px that were above level 200 for all colors (or a specific color). Can effect the image at all from the histogram (without an side step to something like select color range)?
Â
I'm working with very large images on multiple systems (both 32 and 64 bit, all CS4). Normally in the 50,000x30,000 -- 50,000x70,000 px range. For the sake of argument and ease of use I could scale down but eventually need to be operating in this range. The images are created by stitching a series of images taken under high magnification. I would like to find ways to quantify certain regions of interested based on color, but that do not have great color separation (see image 1). The hope would be take this information from several images and export the histogram information. As far as cropping the histogram is concerned: the scanning process used to create the stitched images produces a lot of near white color variation that so far I've been unable to select entirely (via color range select using clusters). I would say my best effort is only 85% of the "white" (see image 2) I want to drop out the white px for size reduction and noise reduction when it comes to histogram statistics.
Â
Also I know this is pushing the limits of intention for PS, but we tried this on three other software packages-seemingly designed for these purposes--and failed.
GIMP :: How To Select Area Select By Color
May 15, 2013Is it possible to select an area then within that area select by color?
View 1 Replies View RelatedPhotoshop :: Select Color Using Color Replacement Tool
Aug 2, 2011I'm trying to change the color of this car to a gloss black using the Color Replacement Tool but how to change the color for the tool.
View 1 Replies View RelatedXara :: Control Shadow Color
Mar 3, 2013How do I control the color of a shadow with the Shadow tool?
View 5 Replies View RelatedXara :: Changing Shadow Color?
Jul 2, 2011I have the attached image. It is the letters A & D combined, I'm trying to change the shadow color. I selected the shadow in the Layer Gallery and used the Color editor to change the color with no luck. Is there some other approach? I'm just playing around with the image to try to stylize it a little, so it would stand out on a black or white background. The creative part is not a strength.
AD.xar
CorelDRAW X4 :: Customize Drop Shadow Color?
Aug 4, 2009When I add a drop shadow to an object the color is preset to red. How can I change that color to black?
View 7 Replies View RelatedXara :: Adjust Color Of Shadow And Highlight?
Apr 16, 2011I've created a bevel, and I'm happy with the basics. Is there a way to adjust the color of the shadow and highlight? I can't seem to find anything.
View 2 Replies View RelatedIllustrator :: Create Drop Shadow Using PMS Color?
Sep 24, 2013I have a vector image of a truck. Colors will all be PMS. How do I create a drop shadow for the truck using a PMS color? I saw some responses online but they are either many years old or not as detailed. It looks like it may require a few steps, but not sure. The Effect>Stylize>Drop Shadow dialog menu only shows CMYK color options.
View 3 Replies View RelatedCorelDRAW X6 :: Black 100 Drop Shadow Color Changes To CMYK
May 21, 2013Drop Shadow.jpg
When I export PDF From Coreldraw X6 black color drop shadow appear in all plates.
Coreldraw X6Â
PDF preset  : prepress
OS : Windows 7 and Windows XP both
I have attached both coreldraw and pdf separation preview file.
Lightroom :: 4.2 D600 Deep Shadow Magenta Color Cast?
Oct 29, 2012LR4.2 gives some ugly magenta color cast on deep shadows especially at high iso pictures. Nikon Capture NX2 gives them too, but not so heavy. If I push the shadows at iso 1600, they are all magenta. Is it related to the beta state of the D600 support? My D700 is at iso 3200 in deep shadows completely black (only luminance noise), even pushed. Is there a possibility to correct that issue with LR (high iso blackpoint correction)? The shadow color tint correction from the calibration option is not really a solution, because it does not only correct the deep shadows, so the other shadows get a green tint.
View 15 Replies View RelatedPaint.NET :: Make Shadow Or Slightly Darker Color Around Edges Of Object?
Feb 16, 2012Are there any plugins that make a shadow or a slightly darker color around the edges of an object?
View 5 Replies View RelatedPhotoshop :: Can't Select A Color
May 4, 2012I'm using a MacPro version 10.6.8.I was trying to draw something on a blank page using a brush but I can't seem to get the brush color to change by selecting a color from the Color Picker. I've chosen red and green but they just show up as different shades of grey.
View 4 Replies View RelatedPhotoshop :: Getting Different Color From The One I Select
May 23, 2008I choose blue color as foreground, I get grey or black color and this happens for all the colors I choose. Do I have to change any settings?
View 1 Replies View RelatedCorelDRAW Graphics Suite X4 :: Drop Shadow On Green Background Comes Out As Reddish Color
Sep 13, 2011I have created a drop shadow on a green background.
Shadow Black value being C - 0Â Â M - 0Â Â Y - 0Â Â K -100.
In the file and the hard print the shadow comes out as a reddish color. How do I get the shadow Black?
Photoshop :: How To Select A Color Accurately
May 4, 2012I have an image with lots of colors. I was wondering how could I select all the greens in the image.
The problem is:
- by "all the greens" I mean even those colors that have in their RGB values, Green as little as 1, even those need to be caught in the selection.
Photoshop :: Select Color Range And Set It To Red
Nov 20, 2013I have a picture of some speakers with red wire. I'd like to select the red and put the wires on a new layer.
I go to select color range and set it to red and i see in the preview that the wires are selected. But the save option is greyed out in the dialog box.
well thats it I'm stuck. when i hit OK it says less than 50% pixels error??
Photoshop :: Select One Color From Image
Jun 17, 2006I have an image that is just a rounded corner and I need the color changed. The image is red and the background white all on one layer. Is there a way to only select the red area? This way I can brush it with a different color.
View 2 Replies View RelatedPhotoshop :: Use Of Auto Color And Auto Levels - Get Shadow / Highlight?
Jul 8, 2013I was using these tool on a lot of images, because they often seemed to vastly improve them, making the colors pop on otherwise somewhat dull ones, and getting rid of unwanted color casts..
Later though I noticed that it is often at the cost of burning out hightlights in some areas beyond salvation.I also find shadow /highlight sometimes does this also.
Then I tried to protect some small areas with a mask before proceeding, but it seems that I can't find information on just painting a mask, but only videos with much more complex adjustment such as the Russel Crow or Lynda ones with maintaing hair detail while superimposing images, which is way beyond what I need in these cases.
Â
If I try the wand to select and inverse I get unnatural looking divisions. Is it a matter of feathering to the right extent?Â
Photoshop :: Select Color Range Under Update 13.0.4?
Apr 28, 2013Using Mac OS 10.6.8 and recently updated Photoshop to version 13.0.4. Select color range is not working properly. Won't select black or white in a black on white logo. Created layer with half green and half red. Select color range will work (in a strange fashion linked to the invert button on the pop up screen) for green half but not red half. Majic wand works fine for either but I must use select color range quite a bit in my work flow.
Â
Is this a compatibility issue or a bug? Have found a couple of recent references to same thing specifically to Photoshop versions 13.0.4 on web but no information on cause or correction. Currently downloading 13.0.4 update again and will reinstall to see if that fixes problem but would like to know if I have to go back to previous version to recapture functionality.
Photoshop :: How To Use Eyedropper To Select Color In A Layer
Aug 30, 2012if I bring a photo in to Photoshop, at that point I have just a layer and the eyedropper will work just fine selecting which ever color I want from that image. However, if I then bring in and place a second image into photoshop, so that now I have two layers that I'm working on, the eyedropper will not select any color on that new image. Obviously I'm doing something wrong, but can't figure it out. I just want to be able to select a color from that second layer image.
View 3 Replies View RelatedPhotoshop :: Select All The Objects In A Particular Color Range
Feb 8, 2013I am trying to select all the objects in a particular color range and then export the color histogram stats of those objects as one object.. In my photo, the object is broken up but I can't seem to figure out how to group the different pieces together.. Currently, when I go to 'export data' after recording it, it gives me a histogram for every single thing selected.
View 11 Replies View RelatedPhotoshop :: Color Settings - Select Other RGB Profile
Jun 12, 2012I want to select the eciRGB profile as my default Working Space Profile. But in PS CS5.1 (Mac) I can select the predefined profiles only. I can't select 'other' and browse for the .ICC profile file.
Â
How can I change it to eciRGB? Put all files into ColorSync folder and into Application Support/Adobe/Color..
Photoshop :: Can't Select Font Color With Eyedropper?
Nov 4, 2004I am trying to use the eyedropper tool to select the font color, but when I click on the eyedropper tool, the font color box disappears.
View 4 Replies View Related3ds Max :: How To Create A Shadow On Invisible Plane Like Matte Shadow
Apr 12, 2011I don't know if this problem was already there in earlier 3ds max versions, but i cant find anywhere on the internet how to create a shadow on a invisible plane like matte shadow could :
View 2 Replies View RelatedPhotoshop :: Auto Select Hex Number Via Color Picker
Jun 5, 2013Why is it that on some versions of cs6 when i select the "set foreground color" (or background), the color dialog pops up with the hex number selected allowing me to quickly ctrl+c it. However, on other computers - with the exact same copy of Photoshop (cloud based and fully updated) it does *not* auto select the hex number. I've looked through the settings to see if this is a feature that needs to be turned on/off but could not find it.
View 2 Replies View RelatedPhotoshop :: CS6 Freezes Using (Select) / (Color Range) Tool?
Jul 2, 2013I was trying to make a color range selection to use as an adjustment mask. Each time I make the selection the dialog box freezes, I can not exit the dialog, or cancel the save options are available but even after saving can not exit dialog box. Also the menu "Select" "Save Selection" option does not work.
Â
I end up having to close the program using Windows Task Manager. I am running Windows 7, CS6 13.01 I have tried this in both the 64 and 32 bit versions of CS6. Oddly if while in the Color Range selection Dialog intermittently if you only make one sample with the dropper tool you can exit the dialog with the selection in tact, but not always.
