I am trying to select all the objects in a particular color range and then export the color histogram stats of those objects as one object.. In my photo, the object is broken up but I can't seem to figure out how to group the different pieces together.. Currently, when I go to 'export data' after recording it, it gives me a histogram for every single thing selected.
View 11 RepliesI have a picture of some speakers with red wire. I'd like to select the red and put the wires on a new layer.
I go to select color range and set it to red and i see in the preview that the wires are selected. But the save option is greyed out in the dialog box.
well thats it I'm stuck. when i hit OK it says less than 50% pixels error??
Using Mac OS 10.6.8 and recently updated Photoshop to version 13.0.4. Select color range is not working properly. Won't select black or white in a black on white logo. Created layer with half green and half red. Select color range will work (in a strange fashion linked to the invert button on the pop up screen) for green half but not red half. Majic wand works fine for either but I must use select color range quite a bit in my work flow.
Is this a compatibility issue or a bug? Have found a couple of recent references to same thing specifically to Photoshop versions 13.0.4 on web but no information on cause or correction. Currently downloading 13.0.4 update again and will reinstall to see if that fixes problem but would like to know if I have to go back to previous version to recapture functionality.
I was trying to make a color range selection to use as an adjustment mask. Each time I make the selection the dialog box freezes, I can not exit the dialog, or cancel the save options are available but even after saving can not exit dialog box. Also the menu "Select" "Save Selection" option does not work.
I end up having to close the program using Windows Task Manager. I am running Windows 7, CS6 13.01 I have tried this in both the 64 and 32 bit versions of CS6. Oddly if while in the Color Range selection Dialog intermittently if you only make one sample with the dropper tool you can exit the dialog with the selection in tact, but not always.
If i want select objects that same fill color in document, I can use 'select - same - Fill color' function in Illustrator.
It's so fast. below 1 second.
But, If i want make it in Javascript, I can't do it like fast.
for(i=0; i<activeDocument.pathItems.length; i++){...}
If document have 10,000 objects, above script can't finish in even 60 seconds.
How Illustrator can traversal fast?
Is there something other way?
Is there a way to select similar objects (by stroke color) programatically?
View 3 Replies View RelatedIs there any way in Elements 9 to convert a color or color range to "transparent"? I want to change a white background of an imported image (a map) to transparent so only the non-white objects (lines and shapes) are present. The image is way too complex to select each area individually.
View 4 Replies View RelatedI am working on a scanned black and white image that I image traced in Illustrator. I am now in the process of seperating certain parts of the image from each other for changing colors. I know how to do this, but my way is by using direct select and going in and picking out points and joining them which is going to take ages. Is there any way to say select a range of anchor points on a path (not the whole path, but not individual points either) like shift clicking a range of files in windows explorer? Are there any other ways I can go about this in a more time efficient manner? I am using the Creative Cloud.
View 1 Replies View Relatedcan't select range of time in some Scene
[URL]........
look what happen when i del all the key in the HumanIK system
[URL].......
I know this discussion title is a bit murky, but the problem is a bit odd. I have Photoshop CS6 v13.1.2. In this version, I will activate the Select Tool, check Auto-Select: Layer, check Show Transform Controls, and then while using the Select Tool I will drag to create a rectangle to select multiple layers with content within the specified area.
Unfortunately, this action only works when I begin the selection from outside of the canvas area. If started from within the canvas area, no rectangle will appear, it will show me a measurement of my selection size, and then no layers will be selected upon release.
This cannot be working as intended right? I mean multi-select dragging cannot be intended to only work when started outside of the canvas right? Is there some way to fix this issue? Is this a bug? See the images below for more information on this issue.
Is there a way to make the color select tool not only select a specific color but related shades as well. I have a graphic that is mainly shades of gray but with black outlines and divisions as well as other colors mixed in. I want to shift all the shades of gray to shades of dark yellow without have to select each shade individually.
View 1 Replies View RelatedI am trying to learn how to use colour range in PS 5.5.
I select the eyedropper & click on a spot inside the area I want to select.
The fuzziness bar in the dialog box is supposed to have a triangle to slide & a value box. Instead the fuzziness bar and the value box are grayed out. There is no triangle to slide. I am unable to set the fuzziness tolerance.
How do I get the fuzziness function to work?
Is Color Range broken in CS6? …. it's not working…. OR it's not working like it has before in CS5...
View 13 Replies View RelatedJust bought the new CS6, but already got a problem:
Color range in Photoshop doesn't work, every time I try to use it, it says, that there is a programming error.
After invoking the color range command, I movedmy eye dropper over the image, (in this case, the large cloud) and clicked. Nothing is selected...nothing appears in the preview window. Alone, the eyedropper tool works well.
I tried color range with different images with the same result. Using the same images with the exact settings, I then tested them using color range in CS5.2 . It worked properly.
I'm using CS6 13.0.4 x64 on an iMAC OS 10.8.2.
I have Adobe CS6 Design Standard student and teacher edition. The package includes Photoshop CS6, version 13.0.1 x64. In Photoshop CS6, when I bring up the Select Color Range dialog, I see the correct dialog box, but the main image of the photo on my screen changes to a black and white display that looks like the preview of a color range mask in the dialog box, instead of the normal full color image I should see. This occurs whether or not I have yet made a selection. Here is a screen photo of this incorrect display:
This problem does not occur when I use Photoshop CS2 on the same computer. Here is a photo of the correct display in Photoshop CS2:
On November 20, I spoke with an Adobe support person on the telephone. I was unable to describe the problem in a way that the support person could grasp, and the case No. 0184920291 description is now listed as "effect doesn't come with color sliders". It is impossible to use the selection eyedropper to select a color from an image displayed as a monochrome mask.
When I have an color image I sometimes need to select a certain color from all the image. Is there a way with Photoshop CS2 to make this selection so the program figures out which areas have the same color specified and select it also? (did I explained myself?)
In other words if I want to select, say dark red in all the spots with the same color range, can I make the first selection of the color anywhere in the image and then use any selection option so it selects all similar colors?
I want to change hair color on a picture (from black to blonde). Those pictures are textures for a game so it is pretty clean and easy to edit usually
I have another pictures with the blonde hairs tones and colors in it.
So i figured i had to save color range or something on the blonde hair picture to apply it on the black hair picture, right ?
Is there a way to select pixels in Photoshop based on given Lab values? I am using Select --> Color Range with a specified "fuzziness" threshold, but I'd rather make the selection based on specific Lab values instead of random pixels that I choose with my eye dropper. Is there a way to do this in Photoshop, or does anyone know of a plug-in that might do this?
View 6 Replies View Related[URL] would like to know if i can create an saturation mask action based on a range of colors that i can select with hue/saturation or color range / can i do it? and how?
[URL]
I am trying to find a way to target specific pixels of a certain color and value range. The Color Range dialog does not produce the desired effect. For instance the white pixels bleeding throughthe fabirc. What is the proper way to select these pixels
View 4 Replies View RelatedI have a problem with CS3. Since a few weeks I can't use properly "Colour Range" feature.
Especially for bright colour the Colour Range doesn't select what I want to select. For example I want to select a bright cloud and can't select it with Colour Range. Of course I checked if there is any information or I have a burn area. I use several different setting but I still have the problem.
I used 8/16 bit, Adobe RGB/sRGB
At Colour Range I use:
- Sampled colours
- Selection
- Fuzziness: how much I need it
- Selection preview: None
After creating a color range channel, broadly, I used the quick mask tool and was working on tightening up on the details. Reloading the selection showed the marching ants around the updated area, however the red mask still showed the original area, not the newly updated area.
Is it possible to update the masked area w/ the red painted area as well as the marching ants?
I tried to search "Color Range" option in Photohop Elements 10 but i could not able to find it.
View 1 Replies View RelatedMy PS element 12 has hidden color range selector.
View 2 Replies View RelatedI would like to replace a range of colors with a single color in an image.
I know there is the replace color adjustment, but this replaces a single color e.g. 190,190,190 with another color e.g. 200, 200, 200. I would like to replace a range of colors e.g. from 185 to 195 with 200, 200, 200.
I just updated to 13.0.4 at the end of last week. Today I went to use the Color Range command and it will not select any colors. The Eyedropper tool works fine. Adjusting the fuzziness and other options doesn't make a difference. Nor does selecting multiple instances of a color to add to the selection. Since I use this command regularly, I feel confident that it is a bug with the update and I would love to hear of any possible fixes. Or, is it possible to downgrade back to 13.0.3? I didn't realize how much I used this and it's a major inconvenience.
View 2 Replies View RelatedI accidentally turned something on in Autocad, and I want it to go away, I have no idea what it's called or how to get it gone. It's akin to the "select other" window in Inventor when you select at the intersection of several objects.
How do I make this go away?
Is there a trick to getting the new Color Range selection function to work on a retina Mac Book Pro? I am quite familiar with the color range selection in the previous version of Photoshop, and used it regularly. I've decided to try as simply as possible by using a flat image (no layers), and trying to select colors. I've increased the contrast in the image to make dark and lights much easier to pull out.
I've explored setting the sample size to point-sample up to 3x3, and 5x5. I've also set the resolution of my display to 2880 x 1800 (to reduce the possibility of anti-aliasing problems). It will not make any selection though, using the eye-dropper sample. Using other options will work, such as Highlights, Shadows, Skin Tones, etc., but it won't do anything with Sampled Colors.
Right now, when i click one object and then another, the first object becomes deselected. Holding shift is the only way for me to select multiple lines right now (other than dragging of course) but that's not what I'm used to and it annoys me a lot. At first everything is fine but then after a while it does this without me changing any options at all.
View 9 Replies View RelatedI have a image that i need to convert to a set 16-color range... the range is: 209 209 209148 157 15723 19 1963 63 63155 42 38213 118 14452 72 2355 179 4481 48 26182 169 2436 48 14589 128 208122 47 188188 62 19937 109 140233 122 46
How would i go about doing this?