I have a picture of some speakers with red wire. I'd like to select the red and put the wires on a new layer.
I go to select color range and set it to red and i see in the preview that the wires are selected. But the save option is greyed out in the dialog box.
well thats it I'm stuck. when i hit OK it says less than 50% pixels error??
Using Mac OS 10.6.8 and recently updated Photoshop to version 13.0.4. Select color range is not working properly. Won't select black or white in a black on white logo. Created layer with half green and half red. Select color range will work (in a strange fashion linked to the invert button on the pop up screen) for green half but not red half. Majic wand works fine for either but I must use select color range quite a bit in my work flow.
Is this a compatibility issue or a bug? Have found a couple of recent references to same thing specifically to Photoshop versions 13.0.4 on web but no information on cause or correction. Currently downloading 13.0.4 update again and will reinstall to see if that fixes problem but would like to know if I have to go back to previous version to recapture functionality.
I am trying to select all the objects in a particular color range and then export the color histogram stats of those objects as one object.. In my photo, the object is broken up but I can't seem to figure out how to group the different pieces together.. Currently, when I go to 'export data' after recording it, it gives me a histogram for every single thing selected.
View 11 Replies View RelatedI was trying to make a color range selection to use as an adjustment mask. Each time I make the selection the dialog box freezes, I can not exit the dialog, or cancel the save options are available but even after saving can not exit dialog box. Also the menu "Select" "Save Selection" option does not work.
I end up having to close the program using Windows Task Manager. I am running Windows 7, CS6 13.01 I have tried this in both the 64 and 32 bit versions of CS6. Oddly if while in the Color Range selection Dialog intermittently if you only make one sample with the dropper tool you can exit the dialog with the selection in tact, but not always.
Is there any way in Elements 9 to convert a color or color range to "transparent"? I want to change a white background of an imported image (a map) to transparent so only the non-white objects (lines and shapes) are present. The image is way too complex to select each area individually.
View 4 Replies View RelatedI am working on a scanned black and white image that I image traced in Illustrator. I am now in the process of seperating certain parts of the image from each other for changing colors. I know how to do this, but my way is by using direct select and going in and picking out points and joining them which is going to take ages. Is there any way to say select a range of anchor points on a path (not the whole path, but not individual points either) like shift clicking a range of files in windows explorer? Are there any other ways I can go about this in a more time efficient manner? I am using the Creative Cloud.
View 1 Replies View Relatedcan't select range of time in some Scene
[URL]........
look what happen when i del all the key in the HumanIK system
[URL].......
Is there a way to make the color select tool not only select a specific color but related shades as well. I have a graphic that is mainly shades of gray but with black outlines and divisions as well as other colors mixed in. I want to shift all the shades of gray to shades of dark yellow without have to select each shade individually.
View 1 Replies View RelatedI am trying to learn how to use colour range in PS 5.5.
I select the eyedropper & click on a spot inside the area I want to select.
The fuzziness bar in the dialog box is supposed to have a triangle to slide & a value box. Instead the fuzziness bar and the value box are grayed out. There is no triangle to slide. I am unable to set the fuzziness tolerance.
How do I get the fuzziness function to work?
Is Color Range broken in CS6? …. it's not working…. OR it's not working like it has before in CS5...
View 13 Replies View RelatedJust bought the new CS6, but already got a problem:
Color range in Photoshop doesn't work, every time I try to use it, it says, that there is a programming error.
After invoking the color range command, I movedmy eye dropper over the image, (in this case, the large cloud) and clicked. Nothing is selected...nothing appears in the preview window. Alone, the eyedropper tool works well.
I tried color range with different images with the same result. Using the same images with the exact settings, I then tested them using color range in CS5.2 . It worked properly.
I'm using CS6 13.0.4 x64 on an iMAC OS 10.8.2.
I have Adobe CS6 Design Standard student and teacher edition. The package includes Photoshop CS6, version 13.0.1 x64. In Photoshop CS6, when I bring up the Select Color Range dialog, I see the correct dialog box, but the main image of the photo on my screen changes to a black and white display that looks like the preview of a color range mask in the dialog box, instead of the normal full color image I should see. This occurs whether or not I have yet made a selection. Here is a screen photo of this incorrect display:
This problem does not occur when I use Photoshop CS2 on the same computer. Here is a photo of the correct display in Photoshop CS2:
On November 20, I spoke with an Adobe support person on the telephone. I was unable to describe the problem in a way that the support person could grasp, and the case No. 0184920291 description is now listed as "effect doesn't come with color sliders". It is impossible to use the selection eyedropper to select a color from an image displayed as a monochrome mask.
When I have an color image I sometimes need to select a certain color from all the image. Is there a way with Photoshop CS2 to make this selection so the program figures out which areas have the same color specified and select it also? (did I explained myself?)
In other words if I want to select, say dark red in all the spots with the same color range, can I make the first selection of the color anywhere in the image and then use any selection option so it selects all similar colors?
I want to change hair color on a picture (from black to blonde). Those pictures are textures for a game so it is pretty clean and easy to edit usually
I have another pictures with the blonde hairs tones and colors in it.
So i figured i had to save color range or something on the blonde hair picture to apply it on the black hair picture, right ?
Is there a way to select pixels in Photoshop based on given Lab values? I am using Select --> Color Range with a specified "fuzziness" threshold, but I'd rather make the selection based on specific Lab values instead of random pixels that I choose with my eye dropper. Is there a way to do this in Photoshop, or does anyone know of a plug-in that might do this?
View 6 Replies View Related[URL] would like to know if i can create an saturation mask action based on a range of colors that i can select with hue/saturation or color range / can i do it? and how?
[URL]
I am trying to find a way to target specific pixels of a certain color and value range. The Color Range dialog does not produce the desired effect. For instance the white pixels bleeding throughthe fabirc. What is the proper way to select these pixels
View 4 Replies View RelatedI have a problem with CS3. Since a few weeks I can't use properly "Colour Range" feature.
Especially for bright colour the Colour Range doesn't select what I want to select. For example I want to select a bright cloud and can't select it with Colour Range. Of course I checked if there is any information or I have a burn area. I use several different setting but I still have the problem.
I used 8/16 bit, Adobe RGB/sRGB
At Colour Range I use:
- Sampled colours
- Selection
- Fuzziness: how much I need it
- Selection preview: None
After creating a color range channel, broadly, I used the quick mask tool and was working on tightening up on the details. Reloading the selection showed the marching ants around the updated area, however the red mask still showed the original area, not the newly updated area.
Is it possible to update the masked area w/ the red painted area as well as the marching ants?
I tried to search "Color Range" option in Photohop Elements 10 but i could not able to find it.
View 1 Replies View RelatedMy PS element 12 has hidden color range selector.
View 2 Replies View RelatedI would like to replace a range of colors with a single color in an image.
I know there is the replace color adjustment, but this replaces a single color e.g. 190,190,190 with another color e.g. 200, 200, 200. I would like to replace a range of colors e.g. from 185 to 195 with 200, 200, 200.
I just updated to 13.0.4 at the end of last week. Today I went to use the Color Range command and it will not select any colors. The Eyedropper tool works fine. Adjusting the fuzziness and other options doesn't make a difference. Nor does selecting multiple instances of a color to add to the selection. Since I use this command regularly, I feel confident that it is a bug with the update and I would love to hear of any possible fixes. Or, is it possible to downgrade back to 13.0.3? I didn't realize how much I used this and it's a major inconvenience.
View 2 Replies View RelatedIs there a trick to getting the new Color Range selection function to work on a retina Mac Book Pro? I am quite familiar with the color range selection in the previous version of Photoshop, and used it regularly. I've decided to try as simply as possible by using a flat image (no layers), and trying to select colors. I've increased the contrast in the image to make dark and lights much easier to pull out.
I've explored setting the sample size to point-sample up to 3x3, and 5x5. I've also set the resolution of my display to 2880 x 1800 (to reduce the possibility of anti-aliasing problems). It will not make any selection though, using the eye-dropper sample. Using other options will work, such as Highlights, Shadows, Skin Tones, etc., but it won't do anything with Sampled Colors.
I have a image that i need to convert to a set 16-color range... the range is: 209 209 209148 157 15723 19 1963 63 63155 42 38213 118 14452 72 2355 179 4481 48 26182 169 2436 48 14589 128 208122 47 188188 62 19937 109 140233 122 46
How would i go about doing this?
In Photoshop, there is a SELECT/COLOR RANGE tool that allows the selection of Highlights, Shadows, etc. Is there anything comparable in PSP X6? This would be very useful when trying to adjust for example blown highlights.
View 3 Replies View RelatedI have two questions for CS4, which may not be possible, and I didn't find in the feature forums.
1) Is there a way to do a color range selection created from all the colors that were selected from the magic wand tool. See attached image one.
2) Is there a way to crop an image based on histogram? For example if I wanted to remove all px that were above level 200 for all colors (or a specific color). Can effect the image at all from the histogram (without an side step to something like select color range)?
I'm working with very large images on multiple systems (both 32 and 64 bit, all CS4). Normally in the 50,000x30,000 -- 50,000x70,000 px range. For the sake of argument and ease of use I could scale down but eventually need to be operating in this range. The images are created by stitching a series of images taken under high magnification. I would like to find ways to quantify certain regions of interested based on color, but that do not have great color separation (see image 1). The hope would be take this information from several images and export the histogram information. As far as cropping the histogram is concerned: the scanning process used to create the stitched images produces a lot of near white color variation that so far I've been unable to select entirely (via color range select using clusters). I would say my best effort is only 85% of the "white" (see image 2) I want to drop out the white px for size reduction and noise reduction when it comes to histogram statistics.
Also I know this is pushing the limits of intention for PS, but we tried this on three other software packages-seemingly designed for these purposes--and failed.
I've got a number of scenario diagrams to produce where I want to show the volume of material to be dredged from a harbour. There will be no "fill" just cut. In some parts of the area of interest the existing ground is below the target depth, so these holes wouldn't need to dredged further.
Two question:
1. Given that the area in question contains cut areas, but also other areas that I don't want to fill. What is the best way to get a good surface map and volume estimation? Currently, I create a feature line surrounding the entire area to be less than the target depth, set the elevation of the line at that depth, then grade to surface and add an infill. This gives me cut and fill volumes (for the deep holes), of which I ignore the fill number. Is there a better way??
2. I've created my TIN volume surface (comparison of EG with the graded depth surface). Now I want to present the maps with "range interval with datum", so the cut volumes are shaded increasing from (say) yellow to red, whereas for the "fill" areas I don't want to show anything (transparent would be ideal or maybe greys). Is there a way to create customised color ranges for the elevation analysis? As I'm doing numerous maps I don't want to be manually editing and re-editing the analysis range details. I'm using AutoCAD C3D 2012.
Civil3D 2013 (infrastructure suite)
Self-built i7-3930K, 16Gb RAM, P9X79 m/board
SSD(system), HDD(data), GTX680, Win7Pro64
Is it possible to select an area then within that area select by color?
View 1 Replies View RelatedI'm trying to change the color of this car to a gloss black using the Color Replacement Tool but how to change the color for the tool.
View 1 Replies View Related
