In Photoshop, there is a SELECT/COLOR RANGE tool that allows the selection of Highlights, Shadows, etc. Is there anything comparable in PSP X6? This would be very useful when trying to adjust for example blown highlights.
View 3 RepliesWhen I have an color image I sometimes need to select a certain color from all the image. Is there a way with Photoshop CS2 to make this selection so the program figures out which areas have the same color specified and select it also? (did I explained myself?)
In other words if I want to select, say dark red in all the spots with the same color range, can I make the first selection of the color anywhere in the image and then use any selection option so it selects all similar colors?
I do not want to use the the Pen Tool to make selections of Vectors! I want to know if it possible to use the Pen Tool to select say the eyes or the arm or the chair or the apple, etc! Then convert that vector pen tool selection into a Raster selection?
Photoshop and Gimp do this! I would love this feature in PaintShop Pro X5, but since that out maybe the next version X6!
PSP X4 opens in the Edit page. When I select the "Manage" tab, the program freezes and I need to use the Task Manager to shut the program down.
I contacted Corel and they told me to reinstall the program. I have done so but the problem still persists. I have the service pack 2 installed.
Windows 7 Home Premium
Dell 64 bit, 3.2 GHz
memory 12gb
Intel i5
How do I select a vector object whose property has been set to invisible? I am using PSP v7.04
View 2 Replies View RelatedI don't know if it is a bug, or something to do with Windows7 but it has been bugging me for quite a while.
On my old computer (which ran Windows XP), i could choose to open several images in PSP (all versions i had at the time) and the number of selected files didn`t seem to matter. Now, on my new computer (since a few years), i run with Windows7 and i find that if i select more than 4 files to open at once (usually jpg or png) i get an error message asking me to "select a valid file". If i deselect enough files to reach 4, it opens them fine.
It is not a big issue, although it might get a bit annoying if i have 20 small files to open at once, as i have to do it in groups of 4 at the time.
I noticed in Cassel's excellent Wishlist for X6 that she said:
Cassel wrote:since it is possible to have the text too long or otherwise extending outside the image, it is impossible to select the whole text to change the font or the size or the kerning.
I have a transparent PNG file that I want to overlap onto a background and be able to fill the transparent areas of the PNG with the background. I know you can do it for text but I can't figure out how to do it for images.
See my examples. M1.png is my transparent file. (not sure why the image is showing in black) I want to overlay this PNG on a background and have it come out looking similar to image m.jpg
To view these files [URL] .......
If I have elements on separate levels and I use the colour range option to select the area, it works on all the levels, not just the level I have selected. That's not what I want! I only want it to select the colour range on that one level. The work around is to manually turn off other levels, but on a file with lots of levels, that can be tedious. Can this be avoided? Incidentally, magic wand works only on the selected level, but not colour range (or color range, if you are American).
View 15 Replies View RelatedI know how to use the various menu items to select rings and loops, and even understand that double-clicking will select an entire loop/ring, but how do I select a range of loops/rings?
After selecting the first edge, then double-clicking on a second only results with the entire loop/ring getting selected. A single-click will merely add the next selection to the first, but not fill in the range in between. This used to be more intuitive. What has changed? I've tried using additional keys to no avail.
I'm exporting Tiff Prophoto files from Lightroom into PSPX4 for further processing. The images are 1 to 2 stops under exposed when compared to Lightroom's image.I have selected PSPX4 color profile to match LR export color space.
I have tried exporting the Tiffs as sRGB and adode1998 and still the images are under exposed. I have little knowledge about color management and have searched around the web for possible answers, but no luck.
For family history purposes, wish to improve the legibility of some hand written 1930 telegrams; the ink has faded with time so I want to change its colour to black. The form printing has not faded.
The user guide draws attention to the fact that the color selected for replacement must be in the image. Using the Dropper tool with sample size 1 pixel I position the dropper where I want it, see the color in the preview window, then right-click and the selected color appears in the background window on the Materials panel. So far, so good. I then place the Dropper tool over black in the swatch on the Materials panel, click and black appears in the Foreground window of the Materials panel. I think I'm set.
When I select the Color Replacer tool the background window immediately reverts to another color, usually white.Incidentally, the user guide suggests you read up on selecting colors with the Dropper; when you do this you learn that its OK to pick colors from the Materials panel.
Question #1.
Were can I change the "color saturation" to use for my "color changer"?
Question #2.
When using "point-to-point" or "edge seeker", is there a way to go back one or two steps, without having to start all over again?
I want to use the paint brush for editing a photo I have, but the only color available is black. No matter where I've looked in PSP, there was no option to change the color of the paint brush. I've read online that you need to change the pallet to material pallet, then go to "Foreground & Stroke Properties" and set the color box to the color I want, but the only colors I get are different hues of black and gray.
Even in Paint it's just a matter of clicking the desired color to use different colors. Why isn't it so simple in PSP?
Is there any way in Elements 9 to convert a color or color range to "transparent"? I want to change a white background of an imported image (a map) to transparent so only the non-white objects (lines and shapes) are present. The image is way too complex to select each area individually.
View 4 Replies View RelatedI have PSP X4 SP2.
Current color working space: AdobeRGB1998.icc.
I want to take HDR photo. I have 3 pictures JPG in AdobeRGB1998. When I giving HDR/MERGE EXPOSURE program automatically changing color profile of my pictures from AdobeRGB for sRGB. Why does it happen?
Just updated from X3 to X4. Spent an hour looking for the workspace color so I could get rid of the huge graphite box. Updated to SP1, found this forum, saw how to change the color in the files menu, and was very disappointed that the menu backgrounds changed, but not the BIG GRAPHITE BOX IN THE MIDDLE OF THE SCREEN!!
X3 gave us control of the colors. X4 is a big disappointment.what about the big graphite elephant in the room, the workspace?
When I try to print, the print placement dialogue box shows the image in greyscale, and when I click the options tab, the options to print color and CMYK separations are greyed out. Going ahead to print gives me a B&W print. The same file prints perfectly in color in PSP X3. What setting I need to tweak?
View 2 Replies View Relatedthe image is attached.I would like to make the pin "blue", without loosing "real" appearance.
View 6 Replies View RelatedI understand many of the aspects of color management: gamut, color space, profiles, calibration, and most of the accompanying pieces. The problem is that I don't understand the inter-relationships of the various steps between taking a photo and printing it.
My equipment is not wonderful. If I were serious, I would have spent 10x what I did; but I'm not a pro. I'll settle for the best I can squeeze out of it. My goal, at this point, is to get my prints to look like what's on the screen.
For software I am using PSP X6 and Windows 8.1.
The photos I get come from various sources. As I understand it, those images (primarily JPEG if they come from a camera, presumably RAW if I scan directly into PSP) should have the profile of the capturing device embedded in them. Is that correct?
In the past I've been told that I should always use the color management in my editing application, rather than whatever Windows makes available. Is that still true? So far as I can tell, there is no way to turn off Windows Color Management (WCS).
You can turn off color management in PSP. There is a checkbox for it.I've been reading that I should set my PSP color working space to sRGB. Is that turned on and off by the color management checkbox? Assuming I have a profile for my capture device (camera or scanner), should I use that profile instead?
I have factory supplied profiles for both my monitor and my printer. Supposedly the printer will automatically select one of its various profiles based upon the paper I use, but that's a setting in WCS. (I can force a particular profile if I want.) In PSP's color management, I have to pick the profile manually.
Should I turn off color management in PSP, and set everything up in WCS? WCS has a setting for viewing conditions. The default is "WCS profile for sRGB viewing conditions", the alternative is "WCS profile for ICC viewing conditions". Does that mean that I could (or should) get an ICC profile based upon my work area's lighting, etc.
In the X3 version there was a menue setting for the color of the work space where you could change it and not have to use the Graphite color. In the X4 version there is nowhere to select non default color. There should be as not everyone wants to be forced into having it the default"graphite or whatever"color.
View 10 Replies View RelatedI no longer have my Paint Shop manual and I don't know what "this" is called to search here or in my help section of my software.
I have Paint Shop Pro Photo X2, version 12.00
I want to change a pic I have of Jimi Hendrix like the one below so I can sketch it onto a canvas. I have played around with Photo shop.
73164_145358045511754_102317626482463_234732_3842573_n.jpg (20.36 KiB) Viewed 586 times
Coming from Pspx2 into Pspx4 this week. Applied a text title to a border on an image yesterday. Accustomed to having just a background colour for plain text. Went to click off the foreground colour and could not find a choice for NO COLOUR in the foreground Also No text box.....what happened to the text box?
What is the procedure for plain text with a single colour now in Pspx4
I am having a rather strange problem with PSP X14. I will describe my general workflow and where the problem occurs.
I do some editing to my photo and save it as a full size image. Next I resize it to a much smaller version for use online. I have no problems at all with these two steps. Next, I cancel the resized dimensions and resize it again to a file closer to the original size, after I sometimes sharpen it and add a canvas. Many of the thumbnails for this last step have horizontal color bars across the bottom of the thumbnail, ranging roughly from 1/16 to 1/3 of the image size. When I hit on it and open the file, the bar is not there. I tried opening this thumbnail in another photo editing program and when I have access to the thumbnails for opening, that bar is there on select images, and when I open the file, it's gone. Unfortunately I haven't had the opportunity to try printing it yet.
I've been following this basic formula for preparing and editing photos for a very long time and haven't had this problem until recently. And it's random, as not all images have this problem. I tried changing this process and reopening the full size file that has been edited and resize that one, but am getting the same random results. I have no problems with the thumbnails for the full size and the first reduced size images.
I have been a long time user of PSP...since v.7 and upgrade versions regularly. I'm running Windows 7 premium, 64-bit on a laptop with an Intel i-7 processor.
In my PaintShop Pro X4 there is a plugin called "Color Efex 3.0 Pro Complete" by Nik Software. Can I get that plugged into my PaintShop Pro X5? How?
View 2 Replies View RelatedI downloaded the trial of PSPx4 and sadly enough the trial does not include Nik's Color Efex Pro 3 (CEP3). What I would like to see, is if the CEP3 window actually fills the screen, or if it is smaller and the user unable to "maximize" it.
View 4 Replies View RelatedI'm testing the trial of X4, and it opens in an unpleasant window which has a dark gray background - is it possible to change the color of this background?
View 13 Replies View RelatedI downloaded a trial version of PSP X4. When i export an image from ASP in ProPhoto RGB color profile, PSP insist to convert it to sRGB. I wonder what is the color profile that been used by PSP as the working space?
View 9 Replies View RelatedAny way to simply remove a color by replacing it with a transparency? More specifically, the background of my image is solid black but the object itself is a little too intricate to cut out via the selection tool.
View 1 Replies View RelatedI tried moving Nik Color Efex 3.0 out of PSPx5 Plug Ins folder into PSPx6 Plug Ins folder, but that didn't work. Tried plugging in via Preferences...File Locations...Plugins... but that didn't work either.
I installed 64 & 32 bit version per the installation instructions. Is there anyway I can install Nik Color Efex that came with x5 into x6?
I have a problem with the display of images that come out too blue. The thumbnail looks correct but the large preview image has too much blue. I have processed the same raw images in other software with no issues but this seems to be an issue with Paint Shop Pro. Is there a setting that needs to be changed?
Once I open the image the image in the raw converter it shows the color balance "As Shot" as a different value that what the Adobe software reads. Not sure why. You can try and adjust the blueness out of the image but why do I need to do this all the time when I don't have to in other programs.
If I open any image in the full editor the thumbnail takes on this too blue look as well, even if no color adjustments were made.
I have attached 2 screen shots that show the problem.