I'm using PS7.
When I save an image for the web, say the initial color is #020202, going through the save for the web menu, placing my cursor over the same area to look at the color and its changed to #535556.
It makes my image look kinda grey.
When I first started using CS6 I would edit my photos and when I used "save as" to save my photos then open them in a different photo viewer they would have lost a lot of color and contrast. When I reopened them in CS6 they still had no color. This is all occured on my PC. I used to use PSE 7 (on my PC) and the "save as" function to save them and they turned out fine. I recently got an iMac and when saved on there the same way and reopened in a different viewer they'd have the correct color,
but when opened on my PC the color would be lost again. Also tried opening the images I saved on my PC in CS6 on the iMac and they still had no colo/contrast. So that would mean it's not a monitor calibration thing. I'm trying to figure out how to save my photos so they have the best quality they can have for printing and also the correct color for clients to view on their computers.
PS: I did use the "save for web" option on my PC and the photos have the correct color that way! But those aren't the proper size and stuff for printing. Also I'm very new to iMac and full photoshop so I'm not sure what sizes/pixels/color modes/etc are normal or what photos are supposed to be.
In this lesson we will consolidate code to prevent code reuse. Follow along as we demonstrate by doing the following and more:
Apply a color to a form command button, loop form controls, and save and get the color from registry
Part 2 of 7
cs_setInnerHtml('video_43f4e134-ee93-489d-ba2f-80042d243821','');
[URL]
Hey, I made something in photoshop cs but everytime I save it ((No matter what format)) it comes out a total washed out color.
This is the color it is supposed to be.
Photoshop 7 .. not CS ..
When I try to save an image for web, it fades all the colors considerably ...
When doing a skin for a forum, I didn't use the web colors palette, and after I had sliced the whole thing up and went to export to web as a JPEG, it looked like that... horrifying, ugh. Thing is, when I do a Save As and save as a JPEG, it retains the original colors.
Is this just something I can't change in PS/ImageReady, or can I somehow change the save for web color space it uses? I'd really like to use the original colors, steel just doesn't fly with aqua.
My file is in sRGB profile, when I go to Save for Web, the color changes as seen below (the sky is not as blue for example). How to make the color not change?
View 17 Replies View RelatedI can't save anymore color when i create a new brush.I had no problem in CS5 but in CS6, it's a pain. When i created a new brush preset in CS5, i had the "save color" option in the windows.Now, in CS6, the only thing i have is "save brushe size" option.
View 4 Replies View RelatedFor some reaosn when i save my image in cs4 it chnages the colour Above is the original and as you can see all same comlourI save it then the below happens How do i stop this
View 9 Replies View RelatedI've been using PS7 on my Mac OX 10.2.8 for some time now and it's worked well. The images I work on in PS7 look bright and true but now, all of a sudden, when I choose the "save for the web" feature, the image appears washed out. And continues to look washed out when I place in my pbase gallery. This is a new event.
The only thing I've done recently was tweak with some Adjustment levels using Scott Kelby's "The Photoshop Book for Digital Photographers." Everything looks great on my screen until I now use that one feature (which never affected the color saturation before.) I would think that doing any number tweaking would affect the image all the way throughout PS, not just when I use this one feature.
Can someone offer some places and numbers to look for that might be affecting how my images appear on line? Maybe I should go back to all the defaults?
I have simple but very troubling problem. I have some vector text over a wood-texture background. I crop it and go to "Save for Web." I use the preset "PNG 8 128 Dithered."
Now, I want to get rid of the most of the background (but keep a touch of brown surrounding the text) by making it transparent. I hold down SHIFT and select the darker hues (see Screenshot #1). Then I click "Map Selected Colors to Transparency."
Is there a possibility to save every color-channel on my document as separate files (cmyk and rgb) ?
View 9 Replies View RelatedWell, it looks like I edited an image in ProPhoto RGB and now when I save as JPEG I get a color change (always looks warmer, like a change in white balance.)
When I convert to another profile, the color change. Is there anyway to either convert and get my colors back or as to JPEG with the color's I'm getting in photoshop? What is odd is I'll see a nice white background in PS and even in the thumbnail. But if I open it in anything but PS I get color change.
I use an outside service to make prints. How can I save an image in PSE 11 in either TIFF or JPEG format with the color profile for the outside lab's printer?
View 4 Replies View RelatedMy PS don't want to understand me! Every time i close brush panel, save document and every time after starting PS i see this panel. In preference i try picking "Remember Panel Location", but it's not working. And this software don,t save last color mode, i start PS with grayscale mode.
View 3 Replies View RelatedI'm aiming to take RAW photo files, edit them in a wide color space, and when posting them to the web, save them as sRGB.
My workspace is as follows:
I open RAW files in Photoshop via ACR as 16-bit ProPhoto smart objects. When I finish editing them, I use "Save for Web" with the "Convert to sRGB" and "Embed Color Profile" boxes checked.
Photoshop and Bridge tell me the profile in photos saved as such is sRGB as expected. When I upload to a site like flickr, however, the metadata says the photo is still in ProPhoto. See an example here: [URL]...If I use "Convert to Profile" and change it to sRGB, then upload to flickr, the metadata says the photo is in sRGB, as it should be.
Can anyone tell me what color settings I need to set in photoshop in order to avoid this from happening? It only happens once in a while and I don't know what I've done to fix it or screw it up. What happens is that when I'm in photoshop and I do a "save for web" my document jumps to image ready and when viewing '2 up' for optimization purposes and comparison, I realize that the original view is actually duller in color and does not look like the original in photoshop. The blacks are definitely not as black.
View 1 Replies View RelatedHurricane Irene has hit us hard and I lost 4 computers.
I downloaded X4 again and when I re-open a file that was designed in x4 previously, all colors replicate except RGB Green (0,255,0) that we use as a cutting contour on a Roland print/cut. There are hundreds of files. It now opens it as Green (4,255,2).
We need to use RGB because of 10 years of files written in Corel 3-11.
Now I realize that files we just composed and saved are also opening with the same results.
A printer ask me to save my file with a "RGB color space". How do I do that in Paint.NET?
View 12 Replies View RelatedI am operating on a Mac Air Book with the new Adobe Creative Cloud. I am new to Illustartor, so do not know how to use it well. I saved my document as a pdf, however, in the preview, it does not have the background color, but is jjust plain white. How can I save my document so that the color will show onto the pdf?
View 6 Replies View RelatedI have an AI file that I wish to save as a mask for an app.
The image has to be:
Format: PNG
Color space: Gray
Alpha Channel: No
I have set the following for my AI file: Document raster effect settings: Colormode: Grayscale
I have changed Edit -> Edit colors -> Convert to grayscale (but the "Convert to grayscale" text is not grayed out the next time I look in the menu, problem?)
I then save the file for Web and Devices as a PNG-24 or PNG-8 (Grayscale, no dither) but no matter how I save it the file info still says that the "Color Space" of the file is RGB. I can't get it to save the file with Color Space: Gray.
Is there any way to save like sets of text(drawing) color & font(family, size, weight)?
In some projects I frequently have to switch from red-arial-30-b to black-lucida-22-i etc. and it's really pissing me off.
So my question is: Are there any built-in tools (haven't found any yet) or plugins that provide the features described above?
I have white text on top of colored shapes in my Illustrator file. When I export to a PDF or a PNG, my white text does not export and display in the final version.
View 1 Replies View RelatedI just got X6. I can't get my default color mode to save. I go to options, document,general and change it from CMYK to RGB click document to save styles for all but it doesn't save it. When I export I have to manually change CMYK to RGB and the resolution every time. In other versions once I set it it was always there. Am I missing a setting somewhere?
View 2 Replies View RelatedI am new to Corel Draw X4 after using illustrator. I created some artwork for a client in hot pink. But when I try to print, or to save as a pdf, or open in illustrator it is not pink.
What do I need to do with my color settings? I have contacted Oki who assisted my in downloading the correct driver to print pantone colors. Therefore must by color settings in Corel Draw?
I want to save my PDFs as All Colors As Black, but setting the option to 0 or 1 doesn't work, it keeps saving the PDFs in color. Here's the snippet of
If oPDFAddIn.HasSaveCopyAsOptions(oDataMedium, oContext, oOptions) Then
oOptions.Value("All_Color_As_Black") = True
oOptions.Value("Remove_Line_Weights") = False
oOptions.Value("Vector_Resolution") = 400
oOptions.Value("Sheet_Range") = Inventor.PrintRangeEnum.kPrintAllSheets
'oOptions.Value("Custom_Begin_Sheet") = 2
'oOptions.Value("Custom_End_Sheet") = 4
End If
What is wrong with the option in the second line (shown in red)? I've tried a few other variations of All_Color_As_Black, but I'm having no joy. All the other examples I've looked at either has that option set to False (0) or that line is commented out .
I tried following action script code to save PDF file with color profile attached:
var saveOps: PDFSaveOptions = new PDFSaveOptions();
saveOps.colorConversionID = ColorConversion.COLORCONVERSIONTODEST;
saveOps.colorDestinationID = ColorDestination.COLORDESTINATIONWORKINGCMYK;
saveOps.colorProfileID = ColorProfile.INCLUDEDESTPROFILE;
doc.saveAs(pdfFile, saveOps);
But got following errors: error an Illustrator error occurred: 1346458189 ('PARM'). What is the correct way to save PDF file with color profile?
I opened a transparent PNG and exported the PNG to another file and unchecked 'save color values from transparent pixels' but about 20% of the color values in transparent pixels STILL remain in the picture when viewed in other programs that show those pixels!!! Gimp is NOT removing ALL color values in transparent pixels!
View 1 Replies View RelatedI am facing problem while using Save / Save As / Save for web options in my Photoshop. On clicking Save / Save As commands, my photoshop gets closed abruptly and I am losing all data. If I choose Save for Web option, the file Save dialog box appears and when I click on the 'Save' button, the application gets closed abruptly.
It was working fine yesterday. My version is bundled in the Technical Communicator suite 3.5 and I faced some problems with Adobe Acrobat, for which my IT team took support from Adobe and got it resolved just two days ago. (Case ID - 184809966)
I have a picture i took with my digital camera when i use photoshop to edit the size and everything and then when i wanna save for the web.. the colors come out slightly different.
View 1 Replies View RelatedI use autocad architecture 2013 and it works just fine until the save turns to qsave whenever i want to save a drawing by save, save as and ctrl+s it works as qsave..how can I turn it back to SAVE ?
View 9 Replies View Related