My PS don't want to understand me! Every time i close brush panel, save document and every time after starting PS i see this panel. In preference i try picking "Remember Panel Location", but it's not working. And this software don,t save last color mode, i start PS with grayscale mode.
View 3 Replies1. Why do Illustrator, Fireworks and InDesign (these are the ones I have checked) open with floating panels, tabs and windows, even in full screen mode... but Photoshop opens nicely in windowed mode with all the panels, tabs and windows fixed?
2. In full screen mode the left ruler is hidden behind the tools panel?! Why?!
3. How can I have Ai, Fw and Id open like Ps opens?
I have Adobe Creative Cloud CS6 for Mac.
When I'm painting, I create my custom color swatches it's easy to just click on the color I need and go. But, when choosing brushes, it's much more complicated.
I use several brushes, the mixer brush and the smudge tool back and forth when painting. Is there a way I can pull the various brushes, and tools into a panel like the color swatches so it's all right there and all I have to do it click and go?
I just installed Lr4 with update 4.3. . First when i click a photo in develop mode it shows up very small. If I adjust the zoom the photo does erratic things. It gets big but with massive distortion then it will clear up but will have an effect like looking into a bunch of mirrers. Also i can not get the adjustment tools to work at all.
View 5 Replies View RelatedI was always able to do this before. (should be simple...) I made a gradient and just want to save / add it to a Swatch Panel that I've already defined and saved. I used to be able to drag (I think) the gradient into the desired Swatch Panel and then 'save the swatch again' It won't let me do this today even though I just did it last night!
I'm working on a Windows 7 machine and I am using Illustrator CS5....
There seems to be way too many tools in the tools panel for me. Many of them I will rarely, if ever use. Is there any way I can rearrange or remove some of them? It would unclutter the screen immensely.
View 8 Replies View RelatedI just got X6. I can't get my default color mode to save. I go to options, document,general and change it from CMYK to RGB click document to save styles for all but it doesn't save it. When I export I have to manually change CMYK to RGB and the resolution every time. In other versions once I set it it was always there. Am I missing a setting somewhere?
View 2 Replies View RelatedWhen using the brush tool what is the difference between using the brush in color mode on a normal layer vs using the brush in normal mode on a color mode layer?
View 5 Replies View Relatedwhether Photoshop's tools panel can be customized? What I mean is can we change the Grey color tools panel icons on the left side of the Photoshop CS6 software, to appear in color, just like how Adobe Photoshop Element's tools panel look like.
View 3 Replies View RelatedI have CS5. The bugs and broken features in AICS6, make it unusable in my workflow.
I am specifically concerned about the inability to drag global color swatches from the color panel to Gradient stops in the Gradient Panel. I use this method to update a gradient color because I find it MUCH faster than option-dragging to duplicate a stop color, then deleting the unused stop. Since I do this constantly, I find using CS6 very tedious.
Is it possible to increase the icon sizes in tools panel to fit the whole screen?
I have already increased the UI font size to large in Preferences, Interface.
When I installed and tried to run Mike Wickham's "All Tools" panel, Photoshop opens a panel with the error:
Load panel xml error Error #2032
how to get the "All Tools" panel working? (I hate pop-up tool menus; I want to see all of them, none hidden)
How do I restore the tools panel on Elements 10? I accidently hit reset all tools to default settings?
View 1 Replies View RelatedIn the Printer Settings drop down menu both Color Mode and Print Mode are grayed-out. This just happened I cannot think of anything I've done differently.
I'm using OS 10.6.8 and the latest Epson drivers for the 3880. I have re-installed both PS and the Epson drivers. If I print from Acrobat Reader everything seems to work fine, this only is happening in Photoshop CS5.
I have a biped that I created to rig a horse. It was originally created in 3da Max 9. The problem is that through the years and different max versions it has worked fine for the most part. But sometimes when I take it out of figure mode the clavicles want to go back to the original rotation. See the attached images.
I have used the rig in 3ds max 9 3ds Max 2010 and now in 3ds Max2011.
This problem occured mainly in Max 9 and now in Max 2011. I have had it happen on other bipeds used in normal upright biped mode.
It has a run cycle animated on it and the biped behaved the whole time it was being animated.
I recently put it in figure mode to model a saddle on the horse and now it jumps when I take it out of biped. I just reinstalled Win7 and completed all wundows updates and loaded Max 2011 and put sp1, sp2 on. A week ago I was working with it with no problems. Since rebuilding the system I have this problem.
os windows 7, upgraded to Gimp 2.8.4 I open an .xcf file and go to single window mode. everthing looks ok the zero offsets on the rulers are where they should be and I can see the bottom of the gimp window where the % size change is. I then ask for a new tool bar which is provided and locked to the widow. if i go to full screen and then back the picture is pushed down as are the ruler zero's and i now can't get to the bottom of the screen. this annoying behavior does not seem to happen in multi window mode. attached is a screen capture.
View 4 Replies View RelatedHow can I add dimension parameters inside a Curtain Panel Tag family to adjust tag position?
View 2 Replies View RelatedWhen I switch to a layout there is a panel "Layout Tools" that grabs focuse. I've never had it before, where/how I turn it off?
View 6 Replies View RelatedIs there any way to edit (remove) the "Lock position" mode of a visible attribute in a block once the block has been created? This characteristic does not show up in BATTMAN for editing.
View 2 Replies View Relatedwhy members change position once mirror has been done in Assembly mode.
1..... i complete a sketch and save it.
2....Then i open up a new assebly while in the same project and save that also.
3...I place the sketch in the assembly and then go straight to Design tab and select insert frame a PFC member.
4 Also the sketch is fully constrained before going into assembly.
5..Now all mitering has been done.
6 Problem is when you Mirror the PFC in the assembly after picking a face or plane they change....................?
7 They mirror but swap ends and the miters are opp hand.
I have a problem with CorelDraw X4, some tools like save, save as, copy, cut, export doesn't work.
View 10 Replies View RelatedI am using Lightroom 5. In the Develop mode, is there a way to add a metadata item to a panel. I shoot with several cameras and the way I process an image depends on the camera I used. I would like to add the "Camera Model" to the Histogram panel just under the ISO, Lens length, f stop, and shutter speed. Now I must flip back and forth between Library and Develop to get the information.
View 2 Replies View RelatedTo create a special effect (but not TOO garish!) I'd like to change this brownish meadow so that it looks much more like one of the swatches from my color swatches panel.
Do I need to create a new adjustment layer, or are there other approaches? Below is a screen shot.
Illustrator files open only in preview mode and tool icons are gone. What do I do?
View 1 Replies View Related(lightroom 4)
So I just updated my mac and now my lightroom controls have changed. The tone/tint sliders and also the vibrance/saturation/hue sliders are missing the color. What I can do change it back? I have uninstalled and reinstalled... restarted my computer....
The left is what it should look like and the right is what my LR looks like...
illustrator is not letting use the properties panel, it is in some sort of preview mode.
View 5 Replies View RelatedI have problem with my Autocad 2011,It always showing a message "unable to load acetauto.isp/fasload failed"
View 1 Replies View RelatedI can undock the draw-panel to get it in "floating" mode, but I would like it to display all the icons in one single column (so all the icons from top to bottom). I googled around, and found that it should be possible to resize the floating panel (mousepointer should change when you move it to any side). However, my floating panel doesn't allow me to do that. It always displays the icons in a 4x3 or 3x3 matrix. (depending on the orientation).
View 2 Replies View RelatedAfter installing PS cc I built up my own swatches, saved them and see that they were listed in the Swatch menu - seperated in the menu from the standard swatches with some seperator lines.
Yesterday I wanted to save a swatch for a friend, and changed the save folder to the desktop.Today i wanted to make an update to my own "super"-swatches, but when I try to save it defaults to the desktop again.
Now, after fiddling about for a while, I've found out this:
• My "super"-swatch is saved here: /Users/[myname]/Library/Application Support/Adobe/Adobe Photoshop CC/Presets/Color Swatches/...
• The swatches placed here becomes seperated from the standard swatches by seperator lines above and below (which is nice).
• I've ruined the save folder default position, as I can't navigate to the hidden Library folder
This means that I can't update my "Super"-swatch and I can't save any new swatches that will be seperated from the standard ones.
how to navigate the "save to"-position into the Library folder again - or just reset the save folder default position?
In Photoshop CS6, when I open the program, I am unable to access the tools. I will not allow me to change from the hand tool. Cannot zoom, cannot move with the hand icon that pops up. I have restarted the program many times. Using a Mac book Pro, 10.7.5.
View 3 Replies View RelatedI have a PSD file open and I added a new layer via the copy command. I have added a Layer Mask to the new layer and I'm trying to use the Brush Tool with black forground to cover part of the new layer. I'm following an online tutorial step by step, but when I try to use the Brush Tool I get "could not use color replacement tool because it only works in full color mode". The Image>Mode is set to RGB.
View 1 Replies View Related