AutoCAD 2010 :: Undocking The Draw Panel To Get It In Floating Mode
Nov 24, 2012
I can undock the draw-panel to get it in "floating" mode, but I would like it to display all the icons in one single column (so all the icons from top to bottom). I googled around, and found that it should be possible to resize the floating panel (mousepointer should change when you move it to any side). However, my floating panel doesn't allow me to do that. It always displays the icons in a 4x3 or 3x3 matrix. (depending on the orientation).
View 2 Replies
ADVERTISEMENT
Apr 10, 2012
I have a dual monitor setup and I maximize acad2011 on monitor 2 and have my toolbars on monitor 1.
I like to have my toolbars floating, but justified to the side with the 'gap' between the montiors so the tool bars fly out and I can see my email or reference docs or whatever on monitor 1 also. Sadly every time I close and re-open acad my toolbars re-justify to the center of monitor 1. I've tried unlocking and locking but that doesn't work. I am using the 'better', errr, excuse me, 'classic' workspace.
View 5 Replies
View Related
Oct 17, 2012
Just loaded AutoCAD Lt 2013 and the Draw panel doesn't have the Polygon tool. What to do?
View 3 Replies
View Related
Mar 19, 2012
I am having a problem this morning. When I started AutoCad LT 2012 and opened my drawing, I can only draw a line in one direction. Also, when i insert a block, all I get is a flat line.
View 3 Replies
View Related
Sep 25, 2013
Before the Revit purists come back with 'Revit is not AutoCAD' - A rectangle is a polyline, a hexagon is a polyline, and Autodesk has seen fit to include these shapes in the Draw Panel.
If I'm creating a component in place, say a cabinet door, and it's elevation is an L shape (or any custom shape - this is for a wall of cabinetry with odd-shaped panels), why, under 'Edit Extrusion', do I have to draw each custom shaped extrusion profile with these goofy single lines? The command doesn't even continue in a sensible way.
View 2 Replies
View Related
Sep 4, 2012
I opened Inventor 2013 this morning to find this issue. Everything starts fine, I am able to open/create a part file and enter sketch mode, but as soon as I click a draw operation (spline, line, rectangle, etc.) it freezes on me. I have been using 2013 for a couple months now without issue, and cannot associate this with a change of anything on my computer.I have tried:
1) Restarting computer
2) Reducing graphics display quality to Rough
3) Checking "Software Graphics"
4) Calibrate my 3Dconnexion mouse
5) The diagnostic check for graphics card (approved)
View 9 Replies
View Related
Sep 7, 2013
I am using Lightroom 5. In the Develop mode, is there a way to add a metadata item to a panel. I shoot with several cameras and the way I process an image depends on the camera I used. I would like to add the "Camera Model" to the Histogram panel just under the ISO, Lens length, f stop, and shutter speed. Now I must flip back and forth between Library and Develop to get the information.
View 2 Replies
View Related
Dec 16, 2012
illustrator is not letting use the properties panel, it is in some sort of preview mode.
View 5 Replies
View Related
Oct 4, 2012
My PS don't want to understand me! Every time i close brush panel, save document and every time after starting PS i see this panel. In preference i try picking "Remember Panel Location", but it's not working. And this software don,t save last color mode, i start PS with grayscale mode.
View 3 Replies
View Related
Aug 12, 2011
Is there any way of setting draw mode through a script?
I can't find any info.
What I'd like is to set the draw mode to paint inside for a selected path through a script instead of clicking twice on the toolbar button or hit Shift+D twice.
View 11 Replies
View Related
Apr 30, 2013
1. Why do Illustrator, Fireworks and InDesign (these are the ones I have checked) open with floating panels, tabs and windows, even in full screen mode... but Photoshop opens nicely in windowed mode with all the panels, tabs and windows fixed?
2. In full screen mode the left ruler is hidden behind the tools panel?! Why?!
3. How can I have Ai, Fw and Id open like Ps opens?
I have Adobe Creative Cloud CS6 for Mac.
View 2 Replies
View Related
Nov 15, 2013
I'm finally making a conscious effort to move to the ribbon... How to copy an existing panel to an existing tab?
I don't really want to start creating new panels from scratch.
View 1 Replies
View Related
Mar 22, 2012
I spent quite a bit of time a while back creating a custom tab panel, which displayed a collection of Lisp macros and other commands. It was set up to roll up out of sight when not needed, to give me back on-screen real estate. It has now vanished for no apparent reason. I am the only person using this machine, so I don't think it's related to any issue with changing profiles.
When I take a look inside the CUI interface I see that this tab and panel are configured with a "yes", indicating that they should be shown as part of my workspace. I've unlocked the on-screen CUI display before going to the CUI dialogue. I've also manually turned off the display of this tab and panel, then turned them on and hit "apply", before exiting the dialogue, all of this to no avail.
View 1 Replies
View Related
May 31, 2012
I have observed that I don't have the "Drawing View Panel" under the Annonate Tab. Try to right on the Annonate tab and go to show panels but the Drawing View panel is not on the list. How to add the Drawing View Panel?
View 4 Replies
View Related
Mar 28, 2012
I'm trying to get all our users to employ the ribbon and move away from toolbars and pull-down menus and one of the last hold-outs is finally giving it a try. Unfortunately, the titles on the ribbon panels is being cut short so he doesn't see the whole height of the title. See the attached PNG.
View 8 Replies
View Related
Dec 19, 2012
I'm working with AutoCAD 2012 and I want to modify the width of the Layer Panel in the ribbon. I have layer names that are sometimes too long to see. Is there still a MNU or MNC or a file like that that I could edit and change the width of the panel in the ribbon?
View 2 Replies
View Related
Oct 23, 2013
I am new to creating ribbons.Is there any way to put two vertical ribbon button just in the middle of the panel? Is it possible to align Ribbon Buttons? Or changing properties of ribbon buttons like font size?
This is part of my code that creating two vertical buttons in a panel,but unfortunately they aren't align.
Dim ribbonbutton5 As New RibbonButton()
ribbonbutton5.Text = "Detail"
ribbonbutton5.ShowText = True
ribbonbutton5.ShowImage = True
ribbonbutton5.LargeImage = getBitmap(My.Resources.Rib_32)
ribbonbutton5.Image = getBitmap(My.Resources.Rib_16)
[code]....
View 1 Replies
View Related
May 31, 2012
I am a new user of AutoCad 2010 and am trying to access what used to be the detail component manager, but now I understand would be accessed through the Style and Display panel under the manage tab.
The problem is, I have no Style and Display panel
I have attached a screen shot showing the manage tab open and the CUI open showing the panel options expanded - which do not include the style and display panel- only the four panels currently installed under the Manage tab.
I've really hit a dead end and don't know where to look for the style and display panel so I can ultimately access the structural catalog.
View 2 Replies
View Related
Apr 19, 2012
I need to draw a 3D of a car's glass in AutoCAD 2011. I have attached pic of glasses.
View 2 Replies
View Related
Dec 9, 2011
How to draw contours in Autocad 2010 LT? Is it possible without eagle point?
View 3 Replies
View Related
Mar 13, 2012
My AutoCAD Architecture 2012 system was acting funny so I reset it and lost my build panel under the home tab. I tried to right click and select it in the tool bar but it was no longer there. How do I get this tab back?
View 1 Replies
View Related
Nov 1, 2012
Any file they could share for the front, side and/or rear panels of a motorhome. Failing that, How I could adjust to create one (e.g. bosy panel from van/truck or complete drawing of motorhome).
View 5 Replies
View Related
May 19, 2010
When objects are selected, they don't show up on the properties panel (or on the Quick Select panel either) It doesn't matter what method I use:
-Pick one object (lines, arcs, circles, blocks, etc), the Quick Properties flyout appears, but empty. Properties flyout show "no selection"
-Window-select object or objects. Quick Properties bar shows up empty again. Properties flyout show "no selection"
-Click on the Quick Select icon. It prompts me to pick geometry. I do. The Quick Select window comes up, but where it says "Object Type", it only has the option "Multiple", and not the normal list of the geometry you selected.
Have Autocad 2011, as well as Autocad 2010 and Inventor 2010 (trial license) on the same machine.
Intel Core2 Quad Q8200 2.34 GHz
8 GB RAM
Windows 7 Pro 64 bit
View 9 Replies
View Related
Nov 8, 2011
I have sold my colleagues on using a ribbon control (instead of a palette) for our custom commands, but... I am stuck on one last detail.
Here's where I'm at.
Using AU examples:
- I have my beautiful new ribbon loading on startup/initialize (IExtensionApplication.Initialize)
- My dll is registering and everything is working as expect.
However.Many users prefer to un-dock panels from the ribbon and place them on their second monitor, either stacked or horizontal. Once the user exists autocad and restarts the application the panels (from the custom ribbon) return to their native positions. The out-of-box ACAD/ACADE retain their position. How can I get my custom ribbon's source panels to retain their last positions?
View 4 Replies
View Related
Feb 15, 2013
I like to set up my draw order within my CAD file since I use many XREFs to create my design. Every time I go back into the drawing the draw order reverts back. How can I get it to stay in the order I have changed it?
View 1 Replies
View Related
May 30, 2012
Is there are tool somewhere where you can make the draw order layer specific. I.e so we have a layer with a certain number of items on it that always appear above another layer with other types of items.
We tend to use leaders a fair bit and they often drop below some of our design elements, ideally we want them to be at the front & have to spend time bringing to front / sending to back etc.
View 2 Replies
View Related
Mar 23, 2012
how to draw 3d box in Dragging Using object arx.
View 2 Replies
View Related
Oct 1, 2012
What is the smallest object I can draw and "SEE" in AutoCAD? I was hoping to prove a point in my introductiory AutoCAD class, but it appears I have been lying!! I tried to draw a cirlce with a diameter of 1.24E-10m. The dot shows up, but I cannot zoom to it. I tried using an enormous zoom scale, but did not have any luck. I am almost positive my instructor introduced the capabilites of AutoCAD by drawing a full scale helium atom, and that was release 14. Is this still possible? Obviously the atom can be drawn, but what are the zoom limitations?
View 5 Replies
View Related
Feb 8, 2011
how to go about drawing up a site plan
View 9 Replies
View Related
May 4, 2012
Is there a command / system variable to set all buttons on every panel in the ribbon to have a button style of "smallwithouttext". I wiould like to do this without having to adjust each button manually
View 3 Replies
View Related
Feb 21, 2012
Any list of what the differnt levels of Expert Mode do? I can't seem to find it in the product help file.
Windows 7 x 64
Nvidia GeForce GTS 450
8 GB Ram
Intel Core i5-2310 @ 2.90 GHz
v. F.107.0.0 AutoCAD Civil 3D 2012 SP1
View 1 Replies
View Related
