I repaired, I reinstalled, I reinstalled again, I repaired again. NOTHING seems to work!
I asked adobe, but they take FOREVER to answer, its been 3 weeks! I keep trying!
The problem is that whenever i open Adobe photoshop, it opens fine, but it wont open any files!
On my old computer, which was a 2.8Gzh Pentium, older model toshiba, photoshop ran really slow, there wwere "lags" when i would click around in a big image. Not bad, but there.
My new computer screams when editing photos... it's a 3.4ghz with a gig of ram, 7200rpm drive etc.
Yet for some reason, batching files runs MUCh slower on the new machine. I've tried to figure out why but can't see anything. Same batch from the same action too. All I'm doing is this:
"Generate proofs" action"
open raw file
fit image to 450
create text later
write "proof"
change opacity to 45%
flatten
save
That's it. But ANY batch I do will run slow like this, not just this one. It's driving me crazy cuz just to batch proofs of about 40 images (about what I shoot for a given photo session) takes like 45min!
is it possible to write a plug in that runs when a user does something.example. you start inventor and open a assembly file the user selects a part and the plugin automatically runs.no pussing buttons, no quick key, it just runs.
View 2 Replies View Relatedevery time I open up an image file in CS5 all I get is a file box containing a couple of large pixel looking shapes. When I hover the mouse over the file my image appears but disappears again when the cursor moves out of the file. I cannot work on any file. I have just loaded up a second copy of my CS5 onto my PC at home. The original copy is on my pc at work.
View 4 Replies View RelatedI recently got a new laptop with windows 8, it is horrible. Aside from that I was able to install my CS5 , I pinned my 32 bit to the task bar but for some reason whenever I am in bridge and want to open an image (s) it goes to open the 64 bit Photoshop.
View 8 Replies View RelatedHow can I set ps cc as standard prog. to open image files? I tried the normal "open with" but that is not working.
View 2 Replies View RelatedI have ps 7 with image ready. Whenever I try to open a file in image ready I get the following error message.
"Could not complete this operation becuase an assertion has failed."
If I open the file in PS first and then switch to Image ready it will work but then I egt the same error message when trying to save it.
I have re-installed ps but still no luck.
When I try and open images using image sequence, it does not open all the consecutively numbered files. It only opens about half of them 471 or 873. Why is this? I have copied the files, batch renmaed a few times, and still it does not open all 873. I can tell this by the short length and when I go to export it only says "files up to 471" and it is not the entire folder.Â
View 7 Replies View Relatedi recovered .nef raw image files from a dead external drive. i now can not open them in any program. the message i get in CS6 is 'could not complete your request because the file-format module cannot parse the file.'Â
Â
originally the extension was .NEF now it is .nef- i dont know if that makes a difference, but i hope the file is somewhat corrupted but still fixable.
Â
usually the .NEF file has a .xmp sidecar file with it. these ended up separated from the original .NEF when the files were corrupted, and i cant match them up.
Looking for a way to open Nikon Image Files .NEF
This link is broken [URL]....
EDIT
I don't think this is PDN [URL]....and several folders down it looks like PDN but is not it leads to an "am i hot or not au site"
...usually it is [URL]...
I'm using Maya 2013 SP2 on a MacBook Pro running 19.8.2. When trying to load 32-bit floating point OpenEXR or Tiff files for displacement maps I will invariably get the following error:
// Warning: Failed to open texture file: <file path>
The proper OpenEXRLoader and tiffFloatReader bundles are loaded in the Plug-in Manager and the very same files open without issue on Maya 2013 on my Win7 machine. It seems this is OSX specific.
I cannot open Nikon D800 RAW image files in lightoom 2. My raw files will not import into lightroom (it imports jpegs, but not the RAW files) I am using Lightroom 2, version 2.7, camera Raw 5.7.
View 6 Replies View RelatedI have Mac Book Pro 2010 with 8 GB Ram and all CS6 programs runs smoothly but photoshop os slow and also all text i type have gaged hard edges how cna i fix those problems ?
View 3 Replies View Relatedbeen working with this CS2 on my PC here at work for sometime but as time goes on it seems to working less and less like it use too..
Take for instance I use the color picker tool and the whole program freaks out as if its trying to allocate ram up. It flickers.. then I wait.. it flickers some more.. and still I wait.. it looks as if its done freaking out, but then flickers somemore and I wait.. total I spend up to 5 mins waiting for CS2 to stop freaking out sometimes, then out of the blue it will begin to work again, but only for a short period of time. Now here is the kicker I am running PS alone.. no other programs, I even end un-needed tasks from taskmanager.
So far I found out the fallow actions makes this occure.
Color Picker.
Closeing Files.
Applying a transform.
Adding Text.
My system specs are
Windows XP Service Pack 2 with latest updates from windowsupdate.com
P4 3.00GHz.
2 GB of Ram.
256MB ATI card.
75-G HD.
My CS2 PS is
Version 9.0.2
Have all the latest update from Adobe Update Center.
I have need having trouble with cs6 running slowly on my iMac. The computer runs fine with all other applications but will quickly run up several gigs of page outs when handling camera raw and photoshop files, it starts to creep along after a short while. Apple ran "stress tests" on the computer and everything is perfectly functional. I used to have no issues with cs5 and the computer should be able to handle the task easily. I have tried to reinstall photoshop.
View 2 Replies View RelatedJust got a new MacBook Pro Retina and Adobe Creative Suite 6 Design Standard. OS x 10.8.3 and Photoshop 13.0.4 runs extremely slow. Why?
View 1 Replies View RelatedI'm running Photoshop CS4 on Vista with 4G RAM. Even when working on a relatively small picture (34M/69M), I get an error when trying to use Quick Select. The message says "could not complete your request because there is not enough memory". I am not running any other applications and I am allowing Photoshop to use 80% of my RAM. I have a 700G scratch disk. What gives?
View 3 Replies View RelatedWhen I double-click SETUP.EXE to install the program, nothing happens. It shows up in the task manager, but it doesn't do anything.
If I run it on my laptop, the install starts without any issues. But I don't want it on my laptop. And it can't seem to run on my desktop.
I even tried creating a fresh user account to install it from there
I am unable to open files from the file "OPEN". I can open from Bridge or open recent document, but not from just File, Open.
My operating system is Mac OS X.
In CS4, when I try to paint on an 8x10 300dpi portrait with a large, soft, low opacity brush...the appliction of the brush sometimes runs 2-5 seconds delayed behind where I am. I put down a few dabs and its OK... but then... when I put down 10 dabs in succession...then there is a few seconds delay. This same thing Does NOT happen in CS3. Im trying really hard to fix this by optimizing all I can. I have CS4 on Win XP SP3, and a 3 gig CPU, 4 Gigs of Ram, and an Adobe recommended Gforce 9600 512mb video Card set for open GL2. Ive set the preferences to 55% of memory for photoshop with 2 gigs of free memory, I set the history states to 20 and tried adjusting cache levels from 4 to 6, and I have a separate SATA scratch disk with 32 gigs free. AND, Ive upgraded to version 11.01 I dont get it. Why are my brushes taking so long in CS4 when they run perfectly in CS3?
View 5 Replies View Relatedi need to run through the preferences but does anybody have any article that will explain what settings?
View 6 Replies View RelatedI'm using Photoshop CS2 and recently installed it on my new Vista system. During normal use, I log in to Windows as a non-administrator, as recommended for security purposes.
Each time I launch Photoshop, it wants to check for updates, and asks for administrator privileges to do so. This is very annoying, first because I then have to enter my password for the admin account each time, and second because I don't need to check for updates every single time I run the program.
I can instruct Windows to run photoshop.exe as an administrator each time it runs, which fixes the annoying problem of it checking for updates, but it still means I have to enter my administrator password each time I want to run Photoshop. Surely there is a good solution to this problem? I'd be happy if I could just instruct Photoshop once and for all to "do not check for updates". I have this option set and it seems to work when I run it as an administrator but when I run it as a non-privileged user, it still insists on checking for updates.
Windows Explorer set to open image files with PSE11, but when I double click on image in WE it launches PSE11, but I then need to click on Open tab in PSE11 to get it into work window. PSE10 did not have this problem
View 1 Replies View RelatedI buy pse 11 from Apple appstore, this software runs very slow(Cpu very higher) and no retina supported , I want know is there a patch for these problem, orelse I'll ask for refund.
View 1 Replies View RelatedMy CS6 open on blank screen only, cant open with image (at les it is hiding behind something on known to me ). Image open OK in Bridge Raw. I did reload CS6, from my CD, but same thing.
View 1 Replies View RelatedOn my current system and on my previous system smart sharpen runs PAINFULLY slow. It happened in CS3, CS5, and now with CC it often causes the Photoshop to stop responding and I have to force quit.
Â
I currently have:
MacBook Pro Dual 2.5 GHz i7
8 GB 1333 DDR3 Ram
dual SSDs running Raid 0
OS 10.8.4
Â
The rest of Photoshop seems to run OK, it's just Smart Sharpen that bogs down I'm usually working on 16 bit files that have gotten to be around 800MB-1.2GB by the time I get to sharpening.
After getting no support from your phone support line. I am writing here in hopes that this issue can be resolved. I cannot open files or create new files in Photoshop CC trial.
View 3 Replies View RelatedAnyway, I would like to know if I can down/install PDN on a mac (before I buy one)
View 8 Replies View RelatedI have CorelDRAW X4, when I open some file(s), which takes long time to open, even which file size is smaller or bigger.
View 1 Replies View RelatedAbout a month and a half ago, after a microsoft update, I cannot open .cdr files from the file/open list. When going to file/open, the programs hangs up, cannot even use "cancel", and have to go to Windows Task Manager to shut down the program. All is well until I try to open a file from file/open.Â
I can import .eps, and everything else seems fine.My work around is to open from My Documents --Which works fine. Just is a silly little aggravation.
I have uninstalled, reinstalled, repaired, etc....all the normal fixes.
After installing an update to Illustrator 17.1 from the Cloud a few days ago I've noticed there is a significant hit in the performance. It runs really slow! Even with simple documents with just a few layers. I opened more complex ones and it's super painful to work. I have to wait a few seconds when selecting or moving a layer. I really want to go back to CC 17.0, As for the system I have the newest Mac Pro form the previous generation (before the trash can model) - Intel Xeon 6-core 2x2.4 with 28 gb of memory ram. Running Mac OS X 10.7.5. Graphic card: ATI Radeon HD 5870.
View 6 Replies View Related
