Photoshop :: Batching Files Runs MUCh Slower
Mar 23, 2007
On my old computer, which was a 2.8Gzh Pentium, older model toshiba, photoshop ran really slow, there wwere "lags" when i would click around in a big image. Not bad, but there.
My new computer screams when editing photos... it's a 3.4ghz with a gig of ram, 7200rpm drive etc.
Yet for some reason, batching files runs MUCh slower on the new machine. I've tried to figure out why but can't see anything. Same batch from the same action too. All I'm doing is this:
"Generate proofs" action"
open raw file
fit image to 450
create text later
write "proof"
change opacity to 45%
flatten
save
That's it. But ANY batch I do will run slow like this, not just this one. It's driving me crazy cuz just to batch proofs of about 40 images (about what I shoot for a given photo session) takes like 45min!
View 3 Replies
ADVERTISEMENT
Jul 24, 2013
I finally updated from photoshop 7 (ancient, eh) to Photoshop CC recently. My computer uses Windows 7.I noticed that my files seems slower when I was working on it via photoshop CS3 (office machine) compared to photoshop CC:
1) When zooming in with CTRL+, photoshop CC seems to go from a low res to gradually filtering to higher res, compared to photoshop CS3's rather jagged, broken lines to smoother lines. The new feature, was causing my files to slow down, because zooming in and out seems to be taking longer than before. Is this a feature I can turn off?
Â
2) I was wondering if photoshop CC being slow is also affected by my file size. The image is 37cm x 142cm at 300 pixel/inch. The file is quite small at 38.8Mb, but I noticed that the document size on the photoshop status bar is 209.7M/552.0M instead. I was wondering if this status bar was a clearer indicator of how slow I could expect the file to be?
Â
3) Lastly, er, this might seem a stupid question, but I was wondering if photoshop CC being slow might be just be an indicator of my computer on the overall being slow. I recently replaced a 3 year old desktop drive with separate power plug with a portable harddrive. When my computer is reading into the harddrive it does get slower. Does Photoshop CC automatically read into external hard drives when it is working?
View 9 Replies
View Related
Sep 18, 2008
I have a new laptop using Vista. It has twice the memory and speed of my last laptop. It takes much longer to open a file in CS3 compared to my other laptop, however once a file is open it runs faster. Is there a setting that I'm missing or is it a Vista thing.
View 7 Replies
View Related
Jul 20, 2006
I repaired, I reinstalled, I reinstalled again, I repaired again. NOTHING seems to work!
I asked adobe, but they take FOREVER to answer, its been 3 weeks! I keep trying!
The problem is that whenever i open Adobe photoshop, it opens fine, but it wont open any files!
View 7 Replies
View Related
Jan 18, 2012
I record a program with my computer. When I get two recorded, I take each episode and "multi trim video' and cut out the commercials. I do it for each one. Now I have two episodes without commercials I open VS and 'add video to timeline.' I do that for each one and now have two shows i save together. I watch them as a 90 minute movie every two weeks instead of each week 45 minute.
For several years, when I save the video "same settings as the video.." it saves it pretty quick. Just as you would count, 1, 2, 3, 4, 5,.... until 100%. The screen is blank when it does this. This has worked fine for years. Resonantly, without changing anything, when I save the file, it goes really slow and the video shows up on the screen when saving. In stead of taking maybe 100 seconds, it takes hours. It never had the video show up and go so slow.
View 4 Replies
View Related
Sep 17, 2012
How do i select a path in an action when the paths of the multiple files have different names ? Now the action is interrupted because it cannot select the path due to its name.
View 4 Replies
View Related
Mar 30, 2009
I have done this a million times.. but now when I am running the batch program on one file, it is not changing the resolution to 72DPI. HELP!!!! lol. my current settings are 500x800 image quality 5 but it is still saving at 300dpi
View 4 Replies
View Related
Aug 24, 2006
I need to send multiple photos with my watermark to people but im having trouble working out how to do it.
View 2 Replies
View Related
Mar 10, 2006
I include a save as in action. I have to choose somewhere to save as right? So choose desktop. Only problem is that even though I tell photoshop in BATCH a new folder I want to save in, it still saves the whole batch job to desktop?
View 2 Replies
View Related
Jan 7, 2009
I am batching about 1200 images. They are all about 3 or 4 megs each. Need them at least 250K. I did a bunch of them (180) on my macbook and they took about 6 hrs. with 2 gig ram.
View 1 Replies
View Related
Jun 7, 2006
I have a photoshop cs2 and have created an action to be used for mutkiple files in one folder, but alas it seems to open up the jpeg file which
I used when recording the action and this is the only file it applies the action to even in batch or in " image process", does anyone know why this has got to occur?
View 1 Replies
View Related
Jun 25, 2008
I recently started an event photography company. The problem that I have is the large volume of pictures I need to adjust at the same time. Doing it one by one is really time consuming. In a nut shell: I need to but the name of the event on each picture as well as a color frame. Is there some kind of automation I can use?
I'm using CS3,
View 2 Replies
View Related
May 16, 2013
Each time I batch process thumbnails in CS6 v13.1.2x64 I've noticed that the resulting thumbnails do not match the sequence of the original photos the thumbs are batched from.
Â
Is this a fault with CS6 or a lack of communication between my Nikon, Mac and Adobe?
Â
The original full sized photos are JPEG fresh out of the camera and havent been preprocessed. I will add that if I do apply batch filter to the full size photos, they too are pushed out of their original numerical sequence.
View 4 Replies
View Related
Dec 8, 2005
I have a brush set to do this but it is VERY time consuming. So, I need to find out how to design a copyright notice and then batch stamp it onto a folder of photos. I have tried and tired to figure this out but not getting anywhere. I am going to either to one across the middle very opaque or I want it down the side of the photo. Then I want to save the batch into a new file and keep the originals intact for printing, etc. I am using PhotoShop CS.
View 7 Replies
View Related
Jul 10, 2009
I am trying to make an Action that will apply a set of various (yet specific) changes to an image, and then apply that Action to an entire folder of images. I have created the action and when run manually it work great, but when I apply it to Automate - Batch, there is a "bug".
Currently, the Action will take the image and set the layer to BG, then it will save the original to a folder. It then will resize the image to a set width maintaining aspect ratio, save that to another folder.
This all works great.
The last portion of the Action reduces the file to yet another width (maintaining aspect ratio), but it then applies a 1px stroke, and applies a dropshadow, at 120 degrees and 100 opacity. When I run the action on an individual image, this part works great, however when I batch this in a folder, all of the images get the dropshadow with a 30 degree shadow. Everything else works fine. The default settings for a shadow are 120 degrees, so I cannot figure out where this 30 Degree setting is coming from.
Any help would be appreciated. I dont know if anyone will be able to read my action, but I will try to attach.
View 7 Replies
View Related
May 28, 2008
if it is possible to set a batch command that will only process tiff files that also have .fff's and .jpg's within the same folder.
I have 2500 images in 125 subfolders with all three formats in each folder. I know I can batch all the sub folders, but can I specify only one type of file?
View 6 Replies
View Related
Oct 17, 2008
I'm running:
AMD Phenom 9550 Quad-Core processor 2.20GHz
4GB Ram
Windows Vista 64
My graphics card: Dual SLI Geforce 9600 GT (1GB Ram)
I booted up CS4 last night expecting to see an amazing difference, and well I did. It ended up seeing slower redraw rates and it chugs when I pan through big images.
I have a feeling there's some setting that I'm not doing right. I updated my Geforce drivers.
In the Nvidia control panel, there are a ton of settings for the Photoshop CS4 applications that I've been playing with but cant seem to get a favorable solution. Anyone have an Easy Button for this?
View 22 Replies
View Related
Mar 27, 2007
I have trouble recording the brush strokes in PS CS2. The record action feature refuses to record brush strokes and similar actions. I tried to create a path and use the 'stroke path with brush' feature but it doesn't record the path. Any idea on how to get this working?
View 1 Replies
View Related
Jun 16, 2004
I'm trying to batch convert groups of photos to b&w. The action i want to perform involves 3 steps: 1)channel mix to b&w, 2)stop to do curves, dodge/burn,etc. and 3)finish b&w convert w/ hue/saturation. If i insert a Stop then PS does allow me to finish the action but it stops the batch. I need to do the Hue/Sat after adjustments b/c otherwise i get a color shift. If this makes sense,
View 6 Replies
View Related
Jun 15, 2004
I'm using Photoshop and the Fit Image command to resize my images for a slide show program. The slide show software does not offer the ability to place the image number anywhere on the image. Is there someway to write an action in Photoshop that will grab the image name and place it where I designate on the image? Even stretching the canvas and filling with black and placing the name there would work. I'm not sure if this is possible or if I need to find an Apple Script to do this.
View 7 Replies
View Related
Aug 20, 2012
Bridge and Photoshop CS6 have been locking up after installing as part of Creative Cloud. I thought CS6 was suppossed to run faster than CS5. I am a PC user, running Windows 7 with 16 GB of Memory and I& proccessor.Â
View 1 Replies
View Related
Jul 20, 2012
I have Mac Book Pro 2010 with 8 GB Ram and all CS6 programs runs smoothly but photoshop os slow and also all text i type have gaged hard edges how cna i fix those problems ?
View 3 Replies
View Related
Apr 30, 2007
been working with this CS2 on my PC here at work for sometime but as time goes on it seems to working less and less like it use too..
Take for instance I use the color picker tool and the whole program freaks out as if its trying to allocate ram up. It flickers.. then I wait.. it flickers some more.. and still I wait.. it looks as if its done freaking out, but then flickers somemore and I wait.. total I spend up to 5 mins waiting for CS2 to stop freaking out sometimes, then out of the blue it will begin to work again, but only for a short period of time. Now here is the kicker I am running PS alone.. no other programs, I even end un-needed tasks from taskmanager.
So far I found out the fallow actions makes this occure.
Color Picker.
Closeing Files.
Applying a transform.
Adding Text.
My system specs are
Windows XP Service Pack 2 with latest updates from windowsupdate.com
P4 3.00GHz.
2 GB of Ram.
256MB ATI card.
75-G HD.
My CS2 PS is
Version 9.0.2
Have all the latest update from Adobe Update Center.
View 2 Replies
View Related
Aug 1, 2012
I've got an exiting problem while trying to batch pdf export.
My task is quite simple: first, look through the drawing (all the lists and model space) and find all dynamic blocks with effective name "SheetGOST", case it's a drawing frame; second, export areas surrounded by those frames to pdf page by page. I've decided that plotting areas via "DWG To PDF.pc3" would be the easiest way.
Practically all the steps made: I get collection of blocks, I know howto print one of them to pdf, and it,s working correctly. The problem is, when I try to plot all the areas in cycle, in output pdf I get num of pages according to num of lists, and only the last area from the list. Test document contains 24 blocks on 3 lists, I get 3 page pdf with 7th, 22th and 24th frame printed.
The code is:
Â
Spoiler (Highlight to read)
Â
[CommandMethod("PlotToPdf")] static public void MultiSheetPlot() { Document doc = Application.DocumentManager.MdiActiveDocument; Editor ed = doc.Editor; Database db = doc.Database; Transaction tr = db.TransactionManager.StartTransaction(); using (tr) { List<GostBlk> BlocksToPlot = new List<GostBlk>(); List<Layout> LayList = new List<Layout>(); GetGostStampCollection(db, ed, tr, ref BlocksToPlot, ref [code]........
View 9 Replies
View Related
Dec 29, 2012
I have need having trouble with cs6 running slowly on my iMac. The computer runs fine with all other applications but will quickly run up several gigs of page outs when handling camera raw and photoshop files, it starts to creep along after a short while. Apple ran "stress tests" on the computer and everything is perfectly functional. I used to have no issues with cs5 and the computer should be able to handle the task easily. I have tried to reinstall photoshop.
View 2 Replies
View Related
Apr 25, 2013
Just got a new MacBook Pro Retina and Adobe Creative Suite 6 Design Standard. OS x 10.8.3 and Photoshop 13.0.4 runs extremely slow. Why?
View 1 Replies
View Related
Dec 24, 2008
I'm running Photoshop CS4 on Vista with 4G RAM. Even when working on a relatively small picture (34M/69M), I get an error when trying to use Quick Select. The message says "could not complete your request because there is not enough memory". I am not running any other applications and I am allowing Photoshop to use 80% of my RAM. I have a 700G scratch disk. What gives?
View 3 Replies
View Related
Oct 19, 2008
When I double-click SETUP.EXE to install the program, nothing happens. It shows up in the task manager, but it doesn't do anything.
If I run it on my laptop, the install starts without any issues. But I don't want it on my laptop. And it can't seem to run on my desktop.
I even tried creating a fresh user account to install it from there
View 39 Replies
View Related
Aug 17, 2009
In CS4, when I try to paint on an 8x10 300dpi portrait with a large, soft, low opacity brush...the appliction of the brush sometimes runs 2-5 seconds delayed behind where I am. I put down a few dabs and its OK... but then... when I put down 10 dabs in succession...then there is a few seconds delay. This same thing Does NOT happen in CS3. Im trying really hard to fix this by optimizing all I can. I have CS4 on Win XP SP3, and a 3 gig CPU, 4 Gigs of Ram, and an Adobe recommended Gforce 9600 512mb video Card set for open GL2. Ive set the preferences to 55% of memory for photoshop with 2 gigs of free memory, I set the history states to 20 and tried adjusting cache levels from 4 to 6, and I have a separate SATA scratch disk with 32 gigs free. AND, Ive upgraded to version 11.01 I dont get it. Why are my brushes taking so long in CS4 when they run perfectly in CS3?
View 5 Replies
View Related
Oct 18, 2006
i need to run through the preferences but does anybody have any article that will explain what settings?
View 6 Replies
View Related
Aug 24, 2008
I'm using Photoshop CS2 and recently installed it on my new Vista system. During normal use, I log in to Windows as a non-administrator, as recommended for security purposes.
Each time I launch Photoshop, it wants to check for updates, and asks for administrator privileges to do so. This is very annoying, first because I then have to enter my password for the admin account each time, and second because I don't need to check for updates every single time I run the program.
I can instruct Windows to run photoshop.exe as an administrator each time it runs, which fixes the annoying problem of it checking for updates, but it still means I have to enter my administrator password each time I want to run Photoshop. Surely there is a good solution to this problem? I'd be happy if I could just instruct Photoshop once and for all to "do not check for updates". I have this option set and it seems to work when I run it as an administrator but when I run it as a non-privileged user, it still insists on checking for updates.
View 4 Replies
View Related