Photoshop :: Recolor A GIF With A Gradient
Jan 4, 2009
I am trying to recolor a GIF with a gradient.
Most of the GIF is a solid color that I want to change from one color to another. I know the before background color (in this case blue) and after background color (in this case green). However, there are many shades of varation in the gradient that I hope can switch from a shade of blue to a shade of green automatically.
I've played with the Image > Adjust > Replace Color options, but can't seem to figure out how to exactly change the background color from the old one to the exact new one that I want.
View 9 Replies
ADVERTISEMENT
Aug 27, 2013
I recolored a set of emotion icons to yellow without any problems. The example is attachment 01.png. However, I failed to do the same with the icon 02.png. I'm struggling with the gradient. I'm using Hue/Saturation Adjustment Layer but I don't know how to set it properly so the icon itself is yellow but the blushing is retained reddish.
View 6 Replies
View Related
Feb 4, 2006
I can't recolor white to transparent with the recolor tool, is this a bug? is there any other way to do it? :?:
View 4 Replies
View Related
Dec 11, 2012
In Recolor artwork is there a way to change the black and white colors to a color? When I try to edit them it doesn't edit them at all. It would be nice if I didn't have to manually tweak the colors to have color before I go into Recolor Artwork.
View 2 Replies
View Related
Jan 1, 2004
Way back I did this but now cannot duplicate it. I'm using PS 5.0. I changed a photo to B&W and then I think I used the eraser to change my granddaughter back to the 'colored' version. It's like what is done in a TV commercial.
View 4 Replies
View Related
May 25, 2012
I have a lot of black and white photos and most of them have just got very faded in just a few spots,how can i re color just these faded spots? I have tried to recolor the whole area but but the faded spots are still there !
View 1 Replies
View Related
Dec 9, 2012
I have a picture that i'm trying to recolor. I'm going to image, adjustments, replace color. I'm choosing the color I want to replace and then choosing a color out of my swatch to replace it with and when the color loads onto my image it doesn't look anything like the color i chose. I don't want to use the saturation, hue, and lightness bars. I have a specific color that I want to use and it doesn't seem to be working.
View 1 Replies
View Related
Jan 17, 2013
Is it possible to create a gradient similar to radial gradient, except that the shape is other than circular? This image would be the starting point, but I would like the white part fading to black to be another shape (say, a rectangle, a banana, etc.).
View 5 Replies
View Related
Jul 9, 2012
I've been experiencing problems with the Gradient editor since I got PS and the problem is that whenever I create a gradient through the gradient editor and then load it, it does load it and instead just duplicates the ones that already exist.
I save all gradients at:
C:UsersRHAppDataRoamingAdobeAdobe Photoshop CS6PresetsGradients
However it does (mostly) work when I import pre-made (from web) Gradients.
I don't know why this happens but it also did the same thing when I had CS5.5!
View 3 Replies
View Related
Jul 15, 2011
I am creating sprites and recolors and i was wondering if it was to recolor an entire image and make it only use the colors you have in the palette this would make recoloring much easier.
View 1 Replies
View Related
Apr 13, 2013
I was trying to recolor an image using the appropriate tool. I followed the instructions on getpaint.net, but when I used the tool, it gave me the inverted version of the color I wanted. I uninstalled and reinstalled twice. I even went so far as to paint the color I wanted, invert the photo colors, use the picker tool, and set the inverted color as my secondary. It turned out the actual color I wanted.
View 2 Replies
View Related
Feb 28, 2013
I have a file with a number of artboards on which there are objetcs filled with 100% Magenta and some with 100% Magenta and 0,34% Yellow. I want to get rid of that 0,34% but Illy is refusing to cooperate.
Even selecting just two or three objects and trying to recolor using the Edit/Edit colors/Recolor Artwork dialog has no effect. I can change the color manually though, for one or more selected objects.
View 3 Replies
View Related
Feb 4, 2013
I have presently 20 colors in a graph and its being a pain using the recolor artwork.
View 1 Replies
View Related
Jan 25, 2014
new to PaintNet. I have a Hex Grid PNG file where the Hex outlines are in a shade of grey. I want to "recolor: the grey lines black. Thought the RECOLOR tool would do that but I can't seem to get it to work. The Hex grid PNG is attached to this post.
Attached Thumbnails
View 13 Replies
View Related
Feb 26, 2011
Basically I have a picture of my hall and I want to change the colour of the blue part to different colours to see what paint would look good.
All I can see is to make rectangles and then a thick brush to recolour each one with the mouse which takes ages.
can I not create a shape to outline the entire blue area and just click on different colour palettes to see how they look?
View 9 Replies
View Related
Mar 31, 2011
I am making an adjustment to my "LOGO" for business. I am trying to recolor the bottom half of a circle, that has a thick border, split in half by TWO colors.
When I enlarge picture to 2400%< i see all kinds of "shades" of colors that line be more "Definitive" ..I am guessing?
When i try changing the color fron a "TAN" color to a "DARK RED" , then Zoom out, the lines are VERY CHOPPY and "SQUARED".
QUESTION:
Is there a way to create a PERFECT LINES on a circle, by using a specific tool, or i have to do a lot guessing and do "FILL-IN" colors to get the line more definitive?
I am a rookie at Paint.net
View 2 Replies
View Related
May 1, 2011
I was using the Grim Color Reaper plugin for when I needed to merge a shadow map and regular texture. Now it seems that with the new release of Paint.net the plugin has stopped working.I need something that merges the shadow map and the normal texture, that works with the new release.
View 1 Replies
View Related
Aug 13, 2012
I want to change the color of a stroked shape but only partially (see attached image):
I tried using the Circle as Clipping Mask for the red Rectangle. When using a Clipping Mask, the red rectangle is clipped to the Fill of the Object, not the Stroke as in Step 3. Is there a way to keep the Stroke and not Expand the Stroke into its own Shape so that I can later change the Stroke from 10 points to 20 points, while retaining the partial red coloring?
I also tried making two Stroked Circles on separate layers and coloring/clipping the top one but having two Strokes stacked creates jagged edges instead of a smooth vector look. The top Stroke never perfectly covers the Strokes below, regardless of Color Mode. For example dublicating the green Stroked Circle and changing its Color to red should make it disappear on the red background, but parts of the green Circle still show through:
View 12 Replies
View Related
Jan 31, 2013
RGB Image.jpg
I'm using X5. I need to recolor the attached image from its current color to CMYK 15, 85, 53, 54. Is there a simple way to do this and retain the light colored styrations throughout the image?
View 7 Replies
View Related
May 25, 2012
Is it possible.
View 11 Replies
View Related
May 22, 2013
The recolor needs to change the artwork from blacks/whites/grays to reflex blue + tones
View 7 Replies
View Related
Aug 15, 2013
Is there any way to apply transparency to a color when using the recolor artwork box? I am dealing with a lot of puppet warp and gradients so it would be nice if I could use the recolor artwork box, instead of looking for all the colors manually.
As you can see from the screenshot, there is a lot of colors to go through.
View 1 Replies
View Related
Mar 5, 2013
How do I change the base color in the recolor Artwork settings? I know this seems like a silly thing but I really need to figure this out and I have read and gone through the manual to no avail.
View 11 Replies
View Related
Jun 27, 2013
The text below is set in one conatiner, I want to recolor 28m 100y process to a PMS 130 Global swatch.
I select the type, use recolor artwork, and take the arrows off of everything except the 2nd color (which is 28m 100y). This is where I get stuck, how do I assign PMS 130 to be the destination color?
Tried clicking a few things and did not work, and if I try to choose document swatches, I get the error below.
I cannot use select >> same fill color, because the type is in one text container, and I need just the gold type selected (along with fills and strokes in the rest fo the document)
[URL]
View 4 Replies
View Related
Dec 12, 2012
working in CS6, OS 10.6.8. I'm working on a 3-color screen print CD label, and the colors will be a white background, plus black and a PMS color. I've been recoloring some CMYK artwork to use in the design, and really liked the results of Recolor Artwork (selecting only black and the spot color), until I noticed that when I selected "tints & shades" it converted everything with black in it to process (which I know Adobe says is why you shouldn't select that option).
But my question is, how can I get the same effect (that is, using shades of the spot color "mixed" with black) without having it convert the shades to process? I'm sure it involves overprinting, but I'm hitting a big hole in my knowledge.
View 5 Replies
View Related
Aug 1, 2013
Illustrator CS6 (other users on 5)
Mac OS 10.6
I just need to go from K and tones of K to a spot color and tones of a spot color.
I'm using recolor artwork because I can't merge into K. The art comes in from our customers as K so we can't just design differently.
The rectangles on the right are k and tones of k. The rectangles on the left are the results after converting to a spot color with recolor artwork. Using recolor artwork. I just need a way to accurately move the tones from k to a spot.
View 16 Replies
View Related
Sep 10, 2012
I have two photos, shooted probably the same day, by the same photograph in the same place !But the pose is a bit different. first one is in high resolution and in black & white nuance. second one is a small resolution and in full colors.
I wish re-color the black&white photo using exactly the same nuance from the colored one.
can i "copy" all the colors from the color-one to the b&w one ?
i hope there is a quick way to do that with adobe photoshop or with a commercial plugin. Something like : i load the first one (color), i load the second one (b&n), and i press Ok and magic appears !
here are the photos :
the black and white to recolor
[URL]..........
the source color to use
[URL].........
View 4 Replies
View Related
May 24, 2012
The Recolor Artwork dialog does not replace the color of objects filled or stroked with pure black, either CMYK or RGB. (Yes, with the Recolor Art checkbox selected.) The dialog will replace any other color, but not black. Not even a manually created rich black. Manually selecting another color from the Color or Swatches panel does change the object's fill or stroke.
This happens with both CS6 and CS5 under Windows 7 x64. I reported it as a bug on the prerelease site. Also not sure if bug reports are still being read for the released version.
View 6 Replies
View Related
Sep 10, 2012
I have two photos, shooted probably the same day, by the same photograph in the same place !But the pose is a bit different.
first one is in high resolution and in black & white nuance. second one is a small resolution and in full colors. I wish re-color the black&white photo using exactly the same nuance from the colored one.
can i "copy" all the colors from the color-one to the b&w one ?
here are the photos :
the black and white to recolor [URL].......
the source color to use
View 14 Replies
View Related
Aug 28, 2012
I have CS5. The bugs and broken features in AICS6, make it unusable in my workflow.
I am specifically concerned about the inability to drag global color swatches from the color panel to Gradient stops in the Gradient Panel. I use this method to update a gradient color because I find it MUCH faster than option-dragging to duplicate a stop color, then deleting the unused stop. Since I do this constantly, I find using CS6 very tedious.
View 4 Replies
View Related
May 21, 2013
The recolor tool does not recolor shades into shades but only shades into a fixed color. Eg if I have a gradient blue to green and recolor the green into red, then it won't be a gradient anymore. Also, using eg. antialiasing for lines you get lighter shades of the chosen color, again maing it problematic to change the line into another color. What to do?
View 1 Replies
View Related
