Photoshop CS3 opens very slowly. Not the programm, i mean the files. When i make FILE -> NEW and make my setting and press OK it takes about 45 seconds to 1 minute to make the new file.
When the file is open, it works normal till i want to make the next file.
With the scenarios set up below, it seems that these files are taking unusually long to open and save (up to 20 minutes on scenario #1, up to 7 minutes on scenario #2). Is this typical for the filetype described?
SCENARIO #1
[Running 32 bit Windows XP on a 2.3GHz ThinkCentre M55p, 2GB RAM, Photoshop CS1. Have files ranging in size from 50MB to 325MB. Application installed on C: drive, primary scratch disk is on partitioned D: drive with 3.96GB free space, secondary scratch disk is on C: drive with 53.98GB free space. Largest file has about 12 layers, including 3 layers with rasterized PDFs and about 9 layers that have blocks of filled color with craquelure & inner shadow added.]
SCENARIO #2
[Running 32 bit Windows XP on a 2.3GHz ThinkPad T61p, 2GB RAM, Photoshop CS1. Have files ranging in size from 50MB to 325MB. Application installed on C: drive, primary scratch disk is on partitioned D: drive with 36.4GB free space, secondary scratch disk is on C: drive with 29.7GB free space. Largest file has about 12 layers, including 3 layers with rasterized PDFs and about 9 layers that have blocks of filled color with craquelure & inner shadow added.
In Lightroom 4.2 when open and I want to edit in PSE 10, I go to Photo, edit in PSE 10, and PSE 10 opens, but there is no image. I want to edit in PSE 10 and can't. Using LR 4.2, and attempting to edit in PSE 10, PSE 10 opens but no image opens to edit
View 1 Replies View RelatedI have a PSD with the size of 344 MB. When I open it with Photoshop CS5, it take 1,38 GB from the RAM.When I do the same with Photoshop CS6, it take 5,26 GB from the RAM.Then CS6 works very slowly and I can forget to do anything with it.
I have a notebook with this technical data:
Intel Core i7 2Ghz8 GB Ram AMD Radeon HD 6850M 4GB1000 GB HDD...The settings for performance of both Photoshop are the same.
I just purchased a new computer - an HP h8-1360t with an intel i7-3770 core, 10 gigs of RAM, NVIDIA GeForce GT 630 graphics card. I have a solid state hard drive as my start up and scratch disk with a separate hard drive for files.
Everything is running very quickly in photoshop with the exception of saving my files. I'm working on photographs (around 3000x5000 pixels). I use lightroom first, then open in photoshop, adding maybe 10-15 layers. When I go to save, it takes a minute or so. I know it's not long, but it's the slowest part of my workflow, and when editing many images it really adds to the overal time. Is there something I can do to make this process faster?
I've been using CS for a short time, but when I open the file browser the program comes to a crawl. I'm currently using a laptop with a 700mhz processor and 512mb of ram. Are there any setup settings I should be using to get the thing to run faster, short of dumping the file browser?
View 4 Replies View RelatedI have need having trouble with cs6 running slowly on my iMac. The computer runs fine with all other applications but will quickly run up several gigs of page outs when handling camera raw and photoshop files, it starts to creep along after a short while. Apple ran "stress tests" on the computer and everything is perfectly functional. I used to have no issues with cs5 and the computer should be able to handle the task easily. I have tried to reinstall photoshop.
View 2 Replies View RelatedSo, I purchased CS6 when it was released and have been dealing with it's ridiculous speed ever since. It's gotten to the point where I can't tolerate it and can get no work done inside of it.
Basically, the main issue is the menu bar. I'll click on File or Image and have to wait at least 5 seconds for the menu to drop down. In the layer pallette I'll go to Alt Drag a layer and it'll freeze for a good 5-10 seconds, then reset and let me drag at will. Until I want to do another layer...then it does it all over again. Brushing occasionally becomes painfully slow and delayed. I used CS4 for years and never had these problems on the same computer. I work with extremely large files and am only having trouble with them after upgrading to CS6.
I'm running on Vista, yes I know. 6GB of Ram, so that should not be the issue. I do plan on purchasing a Mac in the next few months, but really need this problem sorted out Asap. I've googled endlessly and cannot find anything that works. I've changed drawing mode to Basic, disabled OpenGL, seemingly all of the obvious fixes, that haven't worked.
I want to use Vellum section dividers in my portfolio for the same reason everyone else likes them: they're translucence.
Saba's Blog: arts, culture, visual material, and good readin' -
The first 2 photos are Illustrator files. They have a solid white background and the black text. Then, I pasted the fading images. I made these images fade on Photoshop, by using the gradient tool, and setting the fade on top of a mask.
But this doesn't work. It does not fade to nothing....but rather fades to white. I need it to fade to nothing so its somewhat translucent on my vellum.
if print like this on vellum, the image won't fade into the transparent sheet vellum sheet, but would rather fade into a white square (which will print on the vellum and therefore not be translucent).
When I make the image fade on Photoshop, I want to see the checkered pattern underneath, not another layer of white.
Simply put, my image fades to white (the white layer beneath it). I want it to fade to nothing.....so i can paste it on something else, and can see through the faded, part to whatever is underneath.
I have used Photoshop elements for a long time. I continue to upgrade b ut each version seems to run slower then the one I'm upgrading from. Elements 10 is so bad that I have been using 8. I use Windows 7 Home Premium, I have 4 gig memory. I do not have problems with any other programs.
View 1 Replies View RelatedI'm looking for a way to make an object (in my case a kind of girder) slowly appear in animation. I mean that in first frame there is nothing visible and then frame by frame object grows untill it's visible completely. I thougt I could make it by cutting the girder into parts and then "fly" them one by one into position to create the final object. But is there any way to make it smooth, like gradient from nothing to whole?
Intel Core 2 Quad Q6600 2.4GHz
4GB RAM, Radeon HD 6870, DX 11, Space Navigator
3DS MAX 2012
I am finding that the thumbnails for images to be imported from CF and SD cards (Sandisk Ultra and Extreme both 30MB/s) are taking a long time to appear in the import panel in LR5 - and much slower than they did for LR4.
I also get a lot of blank thumbnails as I scroll up and down the panel - sometimes in the middle of the group and sometimes at the top or bottom. These then eventually appear if I hold still on a block of thumbnails.
The most images I have tried to import at once is 155, (Canon 5D III) and I would guess that any more than this would be very slow indeed.
I am using Lightroom 4.3 64 bit. My PRINT module is responding slowly or not at all. I had been using Lightroom 4 upgraded from Lightroom 3 with no issues for some time. I did upgrade to Windows 8 and noticed no issues with Lightroom. Recently however, my PRINT module started responding slowly to print settings and commands...with "Lightroom - PRINT is not responding". This issue started gradually and has increased over time. Making it almost impossible to print now.
View 1 Replies View Related However my machine is not using all cores and is rendering very slowly.I have a mac pro running os 10.9, 2 x 2.4 GHz 6-Core, 64GB RAM, and my graphics card is an NVidia Quadro 4000 with Cuda version 5.5.28. I've looked for updates, but everything seems to be current. Not sure what I should do?
Fast Draft:Available Texture Memory:1515.00 MBRay-tracing:GPU
OpenGL
Vendor:NVIDIA CorporationDevice:NVIDIA Quadro 4000 OpenGL EngineVersion:2.1 NVIDIA-8.18.22 310.40.05f01Total Memory:2.00 GBShader Model:-CUDA
Driver Version:5.5Devices:1 (Quadro 4000)Current Usable Memory:691.00 MB (at application launch)Maximum Usable Memory:2.00 GB
I have AutoCAD 2011 my Cross Hair in drawing area is moving in slow motion
View 1 Replies View RelatedI've been using gimp for awhile now and have had great success using itto retouch about a zillion scans of old family photographs. but other than then few things I need in order to do that (paintbrush, clone tool, rotate tool and crop) I am still largely ignorant of how to use gimp. (There's just so much functionality in there, and I'm sure that I don't even have any use for about 90% of it.)
Anyway, a relative just sent me an old old family photo that some nitwit,perhaps a generation or two ago, did some seriously violence to with a pair of scissors. To salvage this one and to make it look presentable I really need to be able to take the scan I have of it and crop it into a oval shape.(Yes, it is a portrait.)
So anyway, how do I do this? It isn't obviously. I already did manage to figure out how to make a selection of the exact size and shape (and location)of oval that I want, and I _did_ make a selection like that... at least I_thought_ that I did... but then when I did crop-to-selection I ended up with the picture cropped to a rectangular shape, where the rectangle in question is, quite apparently, the rectangle which only and exactly contained the oval that I had selected earlier.
I'm sort-of guessing that what I really want is gonna end up being another one of these things that ends up involving multiple layers... yes? I mean of course, what I _really_ want to end up with is an image that _is_ in fact a rectangle, but everything outside of my selected oval has to end up being painted total white (255).
This is a strictly B&W image, BTW... just like all really old family photographs everywhere. How to fade the edges of the oval slowly to white.
I have for 2 years fighting with any video longer than 30 mins. I recently started doing amature recordings of sporting events with 3 camera views or 3 layers of video, one audio, corss-fading and titles.
To date I have only atempted 2.
While playing the video in the edit mode or even the preview window, it plays fine for 5 seconds then starts to studder and progressively chuggs so bad its impossible to edit.
So I bought a NIVIDA 550GTX-Ti. Did not improve even the slightest.
So before I purchase X-5, the NIVDIA support people asked me if the graphics card is compatable with videostudio. I have duel core 2.4, with 2gg ram.
I've made some custom tool palettes that are on the network. I just have them pathed in the options, and set up as a group for users to access. Civil 3D is real sluggish when it comes to using these, and switching between the tabs, and trying to load them up. But Vanilla AutoCAD loads them and switches between tabs no problem. Is there a variable specific to C3D that needs to change to make it work more like it does in Vanilla AutoCAD?
View 9 Replies View RelatedI have been looking for a plugin that adds a tool to slowly slim lines as you draw. For example, as you draw a line, the line starts off thick, but as you draw the line it gets thinner.
View 2 Replies View RelatedI have a graphic that moves along at a gradual pace which I then want to speed up for the last few seconds. My question is what do I need to do to speed up the process.
View 1 Replies View RelatedAutoCad sticking on commands like copy selection and move tool, It is running very slow and when saving it says there is no system memory, although my Computer has pleanty of memory (the local disk has over 200GB space)
PC has correct specification for AutoCad 13, and I have never had problems until this morning-
Maya 2012 is slow on win 7 64,moving vertex, extruding polys,sculpting,the viewport responds slowly if maya dosen't crash at all!
View 9 Replies View RelatedI have a drawing the loads slowly and makes Civil3d become non responsive for i while.
It seems to stop with "finding interior borders" as the action in the lower left corner it has some datashortcuts and xrefs on to a network drive.
How to find what is the causing the slow down?
I will start by removing all the xrefs and datashortcuts and see if it works?
I think I have read about slow load times with network drives recently but can not find the post again.
I have both ACad 2002 and 2012, (both 32-bit) installed. I have plenty of RAM.
I'm converting a .dwg file to a .pdf and plotting to the desktop to either send out the pdf file or print to myself.
My problem is that it takes "what seems like forever" to plot a .pdf file to the desktop using 2012.
My situation is:
1. In 2002, using the Adobe pdf driver it takes 6.7 seconds from the time I press plot until the pdf file appears on my desktop.
2. In 2012, using the same 2000 formated file opened in 2012 it takes 37 seconds for the file to appear on my desktop.
3. In 2012, using a .pc3 driver, the same file, qsaved and formatted to 2012 takes 34 seconds to appear on the desktop.
Acrobat was installed on my computer prior to ACad 2012 but I've uninstalled/reinstalled Acrobat and I get the same result as above.
Is there anyway to speed Acrobat up? I defrag'd, cleaned the registry but I get the same results.
I can open photoshop but it does not respond to anything, not even the Ctrl key. I have a new pheonix envy and windows 8. I have only used this photoshop program for one editing project. I have tried to reset the preferences with the keyboard shortcuts but nothing happens. I cannot quit the program or close the window. The program is completely frozen everytime I open it and all I can do it restart the computer. What could be causing this? It was working before I edited some photos....
View 2 Replies View RelatedWhen I try to open CS6 bridge, CS4 bridge opens instead. I'm running Windows 7. How do I fix this?
View 3 Replies View RelatedI have CS6 and CC on my system. CC opens fine when I open it with the Shortcut. But when I try to open a tif file on my desktop, the default program is CS6 and not CC. So I try "open with and CC is not listed. So I go to browse and find the Photoshop CC.exe icon under programs and choose it, I can't get it to show in the list. I want to make this my defalult program and it won't work.
View 4 Replies View RelatedJust installed Photoshop CC, for the first day it worked fine, now it opens and before I can open a file, it closes (crash) without any error message.
View 3 Replies View RelatedI just bought adobe creative suite 6 design and web premium package, I`m assuming photo shop cs6 is fully updated, I just installed it two weeks ago and I have not had any problems so far.
I have windows 7 on a hp laptop which is bran new. today I went to open up PS and it immediately says cs6 has stopped working then it shuts itself down.
When i try to open Adobe Photoshop CC it only opens in the taskbar and Im unable to open it completely as a whole. My only option for the taskbar is to close the window.
View 2 Replies View RelatedI recencly purchased a new Mac. Specs: OSX Version 10.7.4 and installed my copy of Photoshop CS4 onto the machine.
When ever I restart Photoshop it always automatically opens the last doc in the program from the previous work session. Is there anyway to stop this from happening?