VideoStudio :: X4 - Large High Def Videos Slowly Chugging To A Stop
Mar 5, 2013
I have for 2 years fighting with any video longer than 30 mins. I recently started doing amature recordings of sporting events with 3 camera views or 3 layers of video, one audio, corss-fading and titles.
To date I have only atempted 2.
While playing the video in the edit mode or even the preview window, it plays fine for 5 seconds then starts to studder and progressively chuggs so bad its impossible to edit.
So I bought a NIVIDA 550GTX-Ti. Did not improve even the slightest.
So before I purchase X-5, the NIVDIA support people asked me if the graphics card is compatable with videostudio. I have duel core 2.4, with 2gg ram.
View 1 Replies
ADVERTISEMENT
Dec 8, 2010
I cannot save any high quality videos I edit in Corel VideoStudio Pro, and I don´t know why. I have this program for about three months and there were never any problems. However now, when I want to save the final product and choose the usual WMV HD 720 option (or any other high quality option), the video saves in the lowest quality possible! I don´t know what might have caused this. Does it mean I have to re-install the whole program?
View 12 Replies
View Related
Aug 11, 2008
With the scenarios set up below, it seems that these files are taking unusually long to open and save (up to 20 minutes on scenario #1, up to 7 minutes on scenario #2). Is this typical for the filetype described?
SCENARIO #1
[Running 32 bit Windows XP on a 2.3GHz ThinkCentre M55p, 2GB RAM, Photoshop CS1. Have files ranging in size from 50MB to 325MB. Application installed on C: drive, primary scratch disk is on partitioned D: drive with 3.96GB free space, secondary scratch disk is on C: drive with 53.98GB free space. Largest file has about 12 layers, including 3 layers with rasterized PDFs and about 9 layers that have blocks of filled color with craquelure & inner shadow added.]
SCENARIO #2
[Running 32 bit Windows XP on a 2.3GHz ThinkPad T61p, 2GB RAM, Photoshop CS1. Have files ranging in size from 50MB to 325MB. Application installed on C: drive, primary scratch disk is on partitioned D: drive with 36.4GB free space, secondary scratch disk is on C: drive with 29.7GB free space. Largest file has about 12 layers, including 3 layers with rasterized PDFs and about 9 layers that have blocks of filled color with craquelure & inner shadow added.
View 4 Replies
View Related
Jan 11, 2007
My questions is this: What should I do cut down the almost frozen status of my computer when Im working with gigantic canvas sizes AND 300DPI?
the project in question is a 6 foot x 3 foot banner, that will be printed out, so the DPI has gotta be 300.....
but when im doing the simplest things, paint bucketing, using the paintbrush, it "loads" for a good few minutes for each move... at this rate, Im going to finish sometime 2 years after the deadline.
View 5 Replies
View Related
Jun 27, 2011
I've a scene which is a city layout (30 crore polygons)which now dosent open on my machine..it opened up sometime back on a comparatively low end machine but not on my current machine which is 12 core xeon with 48 gb ram and a quadro 600 1 gb card.
This file is a flythru of city with detailed models and 2K substance maps, thats all. I've gone thru a lot of threads on memory management but so far i was not able to open this file.I dont think it could be a hardware issue as the machine i'm using is quite high end.
View 9 Replies
View Related
Apr 17, 2012
exporting my CorelDrawX6 files as a high quality jpg for large scale printing purposes. In X4 it was very easy - just export as usual to the highest quality cmyk jpg and open in Photo Paint... now when I export this way it takes forever to bring up the preview page and most of the time it ends up being blank. Sometimes even crashes. I have played with all options in the filter dialog menu that I can find but nothing works. Thought it might be a file size problem but never had that problem in X4 and anything under 200dpi will not be high enough quality.
View 11 Replies
View Related
Jun 13, 2012
I've created a dvd slideshow and also added two music tracks to it. I then used the original file and put two different music tracks on it. I hoped it would then play the slideshow twice and I would hear 4 music tracks (i also want it to repeat continuously).
When I used Share- Create Disc the disc played as I wanted it to on my computer, but when I play it in the dvd player at work it just plays the first video with the first two songs on and keeps repeating this.
Is there a tick box I've missed somewhere for it to play both the videos on a loop not just the first one?
View 4 Replies
View Related
Feb 18, 2013
I'm making some graphics to be printed on a car. I have some lines with outer glow on them, but Illustrator won't render these unless I use 72DPI in raster effects reslution. I would like to go higher, but it won't give me anything. Guessing it's to heavy for Illustrator maybe? Is there anything I can do about this? I'm making my graphics in 1:1 scale, but I do it in a lower scale since it's just vector art anyway, however how would that effect my glow? Since it's a raster effect.
View 9 Replies
View Related
Mar 20, 2013
I have been trying to add an MP4 video to edit in VSP. Every time I select the file, it would tell me that "The file had no video data" when it does.
I tried to install the Service Patch which is said to include imports of MP4 files, but it won't install. It tells me " The installed version of the application could not be determined"
View 14 Replies
View Related
Jan 17, 2011
How do you have 2 videos side by side in PD9. Look´s like this video from youtube:
View 3 Replies
View Related
Jul 6, 2012
I am trying to publish several videos to one DVD. I used the menu template and everything works fine after burning the DVD. The DVD auto plays and shows the main menu.
The previews are fine. When I click a video to start, it looks good.However, I cannot find a way to easily return to the main menu so I can start the next video. I tried adding navigation buttons but when I previewed the DVD, they did not work.
View 2 Replies
View Related
Sep 6, 2013
I am making some videos.. And i really liked the flashback transition. but there's only one transition. i saw some tech videos online where they used somewhat same transitions.. where can we get more transitions?
View 2 Replies
View Related
May 12, 2013
Have Sony HDR-TD20V 3D camera and transferred 3D videos to PC. Starting X6 program files are recognized as 3D (little box bottom left) putting videos in timeline. Went to "Create Video File" and selected 3D per manual.
Now here is what I need to know my options as presented. I want to use a Bluray disc to burn with burner (BD) and play in my Sony S570 3D player to 3D Tv. Do I use the Bluray setting and what format (1920x1080)?
I know there is AVCHD, MVC and so on as choices. In other words (in case others have similar camcorder and X6 software) what are the steps I need to follow. I was wondering if I had to leave file as is or have it side by side, etc.
My 3D Tv is able to play any formats (side, Up/DN, etc) I used the Sony Play Memories and burned a bluray successfully but played only in 2D. I've read about players needed to be AVCHD 2.0 to play Play Memories 3D made disc.
I want to be able to use X6 to create discs, burn them and play in BD 3D player.
View 6 Replies
View Related
Sep 21, 2011
I have a Sony HXR-MC50U HD camera. I have been recording videos and then transferring them to my computer using the USB cord. They are in the AVCHD format. I use VS X4 to edit my movies. The video plays great when on the camcorder, however when I transfer it to the computer something happens. In scenes where I "Pan" I sometimes get what can be described as a "squiggle" that runs in the middle of the screen. Sometimes there is more than one of them. The squiggle looks sort of like when cinemax late night is squiggled out.. It is a blurry line that runs across the middle of the screen. This "squiggle" will then transfer to any output file that I select. Whether I choose HD AVI or HD WMV, it still does it..
View 14 Replies
View Related
Mar 26, 2011
I had a topic disapproved yesterday, "Can't create 3D videos", as I had not filled in some details on my profile.I've now updated my profile - hopefully to the required standard.Is it possible you can approve the topic now, or do I need to create it from scratch?
View 3 Replies
View Related
Jul 26, 2012
How to stream HD videos to Apple TV 3?
View 2 Replies
View Related
Feb 17, 2011
I have dual role video which i am trying to merge as one. But when i placed one video in the video track and other in the over lay track, i am able to see both clippings in preview. But when i tried to make both videos equally to be shared in the screen, the clips shrinks and the picture quality becomes thin rather i want to reduce or cut the half portion of each clip so that when both half porting of the clip will fit the screen size to show as a single clip to have the dual role scenes perfectly.
View 2 Replies
View Related
Apr 6, 2012
I using the Trial version of VisualStudio X5. I am wondering if there's a "best" way of synchronizing two different videos of the same event. Example: Say I have one camera that is of someone shooting a rifle. The other camera is of the target impact. Now say I want the video to show this person shooting the rifle, with the target impact shown in a smaller window superimposed on the main video. What is the best way to make sure the two videos are in sync with each other?
View 4 Replies
View Related
Oct 10, 2013
I want to create videos for Instagram, but I'm having trouble making a template that outputs a video that I can upload from my Samsung S3 smartphone to Instagram. I'm currently using VideoStudio X5 and would like to get started with these videos as soon as possible.
View 11 Replies
View Related
Mar 23, 2012
I've tried to compile videos in Quick time format at 800 x 600, 65% quality, using MPEG4 compression and each time it compiles at a much lower resolution than it should be, I used the Indeo compression for AVI and THAT compiles to my liking at 800 x 600, 65% quality, DivX is only free for 15 days, Xvid and Windows Encoder makes no difference (that can be noticed), Quicktime, DirectX and Windows Media Player is up to date.
I'll try compiling it using a compressor other than MPEG-4, but I'm not too hopeful of improvement, why it can compile AVI, but not Quicktime, I tried batch converting AVI to Quicktime, it still doesn't work.
View 1 Replies
View Related
May 2, 2012
I´m trying to edit some gopro videos in X4 (i already got the fix so i can import them ). The problem is to save the final video. The original videos are 1280x720 and i would like to keep the same quality and frame size but i cannot seem to find any option that would do and if i choose "same setings as first video clip" it just crashes.
View 2 Replies
View Related
Aug 29, 2012
The last version of VS I've used was V10. Just installed X5. I'm making a disk that has 2 videos in it. I want 2 menu options, one for each video file. The way I used to do it was to create 2 projects. In each project I'd edit the video as I need. I'd then create a 3rd project and add both projects with the edited videos in them.
Is this still the way to create a disk with multiple videos in it or is there a better way? If I do it this way will I get any audio sync problems? Had that with older versions.
Also, can I edit 2 videos in the same project without having them both in the same timeline?
View 2 Replies
View Related
Aug 31, 2011
I recently upgraded both my computer (to an Intel i7 processor) and editing program from VideoStudio X3 to X4. Suddenly, the FLV videos I convert are appalling quality. Just two weeks ago, I was converting videos to FLV on X3 and the quality was fine. If I use any of the standard options for FLV conversion, the video is such bad quality that it's almost smeared. Even when I increase the bitrate to 1000 (the maximum), it's incredibly pixellated, but less smeary.
View 6 Replies
View Related
Sep 19, 2011
I used trial x2 and x3, but after upgrading to X4 and bought it, it became very slow when making videos. Takes over 2 hours to make a simple vid in mpg 480*320 Or other formats for that sake.. Could it be related to my other video plugins installed in windows? ffdshow ?
View 3 Replies
View Related
Oct 1, 2013
I'm using Corel videostudio Ultimate X6 and regularly record live bands, upload them to youtube after I convert them to a MP4 format using videostudio. A few months ago one of the venues installed a set of quick flashing lights, now my videos look blocky and you can't even make out their faces.
View 8 Replies
View Related
Feb 8, 2013
I am using Video Studio X4. if I can capture You Tube videos for future viewing off line. I am a fairly new user and really need some detailed instructions if it can be done. There are some really informative tutorials regarding my husband's GPS unit and other gadgets but we don't always have access to an internet connection.
View 6 Replies
View Related
Apr 25, 2011
I am a new user of X4 and have used X2 for only about six months so some of my questions may seem lame, but here they are.
First, I upgraded to X4 to get rid of that annoying AVCHD blip problem (it worked). But, I have become increasingly frustrated that the quality of my DVDs are still fairly poor to my mind. I have been taking HD videos of my daughter playing soccer and the videos look good on my computer (in clip mode, anyway, as opposed to project mode, which probably takes more processing power than I have). However, they don't look that good to me when I watch DVDs I have created.
The camcorder is a Sony HDR – CX150 and its native MTS files are 1440x1080. After some reading, I discovered that standard DVD conversion plummets the resolution to 720x480, or 480p. So, perhaps that is part of the answer for why a standard DVD format of the soccer game doesn't look so nice on a 37" 720P or 1080i LCD Vizio TV? The 720x480 picture is being stretched to fit? OK, but why does motion look so bad? The image is decent when people are standing still, but I see a lot of blur and, sometimes, streaking when the camera pans or people start to run. What can I do about that?
I tried upping the bitrate for the DVD MPEG settings (from 6800 to 9800), but that did not work. I thought perhaps I could try making an AVCHD DVD using the 1920x1080 resolution and play it on my Blu-ray player (a Samsung BD-P1590) to see if that might look good. It didn't. In fact, it seemed to be the same or even slightly worse.
So, how do I get the good quality videos I am taking to translate to the TV screen? I have tried two different DVD players and TVs as well as my laptop.
View 11 Replies
View Related
Feb 10, 2013
I want to make my videos 480p. How do I do that?
View 1 Replies
View Related
Apr 8, 2013
I am having a problem viewing some previous videos that I made (I have had two different photo cameras since then and had used some of their software) could that be a problem?I get a message that the computer or disc player cannot find the file to open it.I have read articles about not being able to open VOB,BUP,IFO FILES but I am at loss on what or how to properly correct this concern.I am running windows7.0 and have corel video x5 software .
View 7 Replies
View Related
Oct 5, 2011
I have a video, recorded from a TV broadcast, that has a station logo on the screen. I understand EditStudio Plus has a way of "removing" this. Does Video Studio have a similar function (other than just super-imposing a black box over the logo)?
View 3 Replies
View Related
May 15, 2013
I am continuing to edit old videos to transfer them to DVD. I am currently trying to edit what I assume are old analogue 4:3 clips and find that even when played in the windows viewer, and again when I transfer them into Videostudio, that the Audio is about one third shorter than the film clip. I can understand the audio by dragging out the length to match the length of the clip, but the resulting sound is pretty dreadful.
View 2 Replies
View Related
