I've mapped a grid onto a sphere. The latitude lines look fine. But the vertical longitude lines come out wiggly!
I've tried different sizes of the grid graphic. I've tried rendering preference quality and rendering the file.
I am starting with a scanned pencil drawing, which often has very broken, rough lines, no matter how dark or clean I try to draw. I am looking to turn these lines into clean, solid lines, of one uniform color, for use in another program which relies on completed loops and no breaks in lines.
I've tried tools such as Trace Contour, but this isn't doing quite what I'm looking for. I'm very new to Photoshop, so I'm hoping there is something I am missing. Something like the magnetic lasso would work wonders, if only I could brush that line instead of making a selection.
I hope some of you experts out there in the Photoshop world can assist me in some questions I have about older versions of Photoshop vs new, how to use with a Wacom Cintiq 12wx,
and possibly if I can get a student CS5 extended newer version for my son Tony's use if the ver 5.5 I have won't meet his needs?
Here's the effect I'm going for, maybe a bit more glow and lines do not need to arc like that: [URL]
And like this: [URL]
I'm having a couple of problems: 1) if I put the network lines on the map it looks too flat so I think I need to apply them to a slightly larger invisible sphere; 2) when I add a blur/outer glow to the lines they do not wrap cleanly on the sphere, they kind of break up and distort. Plain lines do not seem to have this problem but objects with effects do.
I need to form a line/lines with thickness on the surface of a sphere as seen on the attached image. I also want to apply transforms to the line while keeping it stay on the surface. How can I do that?
View 9 Replies View RelatedI have a very large and complicated file from a civil engineer with way more information in it then I need. I want to pull layers I need out of the civil dwg and into a new dwg.
A few problems with the civil dwg are, all lines not in same x/y plane, everything not at 0,0,0, layers need to be combined, layers need to be purged, etc
Would just copy and pasting the layers I need into a new file be a good way to approach this?
i have some overlapping lines which are in different layers. i want to clean them up, but wants the cleaned line to be remained in a specific layer. Can i know or change which layer will the cleaned line be remained in?
or can i simple select the duplicate line instead of deleting them?
I often draw freehand onto a piece of paper and then scan the completed sketch, to change size and clean up sketch lines and then re print...I've recently tried pant.net and i was wondering if there is a tool that cleans up extra sketch lines? as most of my designs are basically tattoo designs, i need to make sure the lines and everything is perfect before taking them to a tattoo artist?
View 2 Replies View RelatedI have a file in autocad with something like 24,000 points of objects that include the x,y coordination in autocad... so i export all the point to a text file because i want to have all this point in my database of my site (i am using Google maps to see all the point on the map) but, the problem is that the x,y point is not in the correct format like the Google maps need... an example for some point:
181447.163751433,643530.564881084
But i need it to be with latitude and longitude... any formula to change this xy point to longitude and latitude and i will do it with c# or there some other way to do it?
There seems to be a bug somewhere in the way Lightroom 4 is exporting GPS information.The GPS data is fine in the .xmp file and in Lightroom 4 (shows up on the map okay)but when I export the RAW file to a JPG then the GPS info in the file properties (Windows 7) reads like a 2 or 3 long integers (for example -2147483648; etc). This may be normal but when I import the file into Photoshop Elements 10, the GPS info appears as zeros and when I upload the jpg to flickr, the GPS info is absent.
View 14 Replies View RelatedWhen I look at the LatLong choices while in the "Select Global Coordinate System", I see a longer list than I expected. Which of these choices is most consistent with the Latitude and Longitude system Google Maps uses?
View 1 Replies View RelatedI have a customer who needs to have a precision of 5 decimal places for Lat and Long. Currently the style can be set to 4 (0.0001).
Any way to get 0.00001?
Point number, Lat, Long, Pole tag, Dams_ No, Height, Yr Installed, QSEC.
I have created a new point format with Point number, lat, long and the last 5 colums i created with User-Defined (data type is String)
When I import the point, it said doesn't match with point format.
Is there a way to create points using latitude and longitude. i have some borehole to be located on my project and the location information was given to as latitude and longitude.
View 4 Replies View RelatedI would like importing lat long points into Autocad Map 3D 2013. Once imported, the points need to be connected to form a line.
View 2 Replies View RelatedI wish to input the GPS data (latitude, longitude) manually in the ways:
- Insert the value directly into the GPS field on the image (in map mode). It is pretty hard. In fact, I try to copy/paste value but I failed. I wish to be able to simply add manually GPS data to a picture.
- Move the map to a point giving llatitude, longitude. Maybe add a field close to "search".
Is there a way to find the latitude and longitude of a point in an AutoCAD drawing?
View 4 Replies View RelatedI need to work with latitude and longitude, I believe there is a way to do this in autocad 3D Basics, but I can not remember how. How I could change the units to accept lattitude and longitude?
View 3 Replies View RelatedI am trying to create a Pipe Network table where my structures are located by Lat and Long. In the Table Component Editor under Properties I have a selection for 'Structure Northing' and 'Structure Easting' but I'm looking for the Properties Latitude and Longitude. How is it possible to add Lat and Long to my Structure Table?
View 6 Replies View RelatedHere is a still from what will be a trade show video. The problem is that the longitudinal lines are a bit wobbly, especially near the poles, for instance in the top right quadrant, between the orange and yellow earplugs. [URL]..........
I created a new 3D object with the preset sphere from a layer that is a grid of my client's products. As the sphere rotates, the black edges of the grid straighten out as they come around to the front, and then get wobbly again as they approach the edge of the sphere. At first, I made the black part of the grid from a bitmap mask (which had caused a problem in an earlier 3D file) but no, same problem when I made the grid from a vector mask.
Pretty sure it is not a hardware issue as I have gone thru all the optimization steps for using the Mercury Graphics Engine on my quad-core iMac 27" with a supported video card, and the latest version of OSX.
I'm trying to make a marble ball that looks wet, thus a reflection. I can pretty much get the ball (albeit not extremely realistic) and some what of a reflection idea going on after looking at some reflection tuts, but the reflection just doesn't seem to wrap right or something, it just seems...unnatural.
View 14 Replies View Relatedpaint circles, align them into a square and spherize?
View 2 Replies View RelatedIs it possible to make the above in PS, then possible animate via IR to spin on on axis, also how hard would it be to put rings around the sphere (like Jupiter(?)
View 2 Replies View RelatedI believe I found this in CS2, but now I can not find it in CS3. Wasn't there a sphere tool that allowed you to wrap a bitmap image on a spherical or cylindrical curve, like a soda can or sports helmet?
MAC OSX | CS3
I have been following a tutorial on a wireframe sphere and all was going well until I was told to go to: "Filter > Distort > Sphereize"
I am using Photoshop 6 and this filter isn't included in my menu.
Doe's anyone out there know of anywhere that I can download this filter from as Its an important part of the project I am working on.
I'm trying to find a quick way to realistically wrap text onto the surface of this sphere, and initial experiments in CS2 with the Arc warp and some perspective finangling have proved below expectations.
View 9 Replies View Relatedplacing text on a sphere. I've seperated a golf ball from a different picture and would like to place text on it, any ideas on making it look as if it was there when the picture was taken?
View 1 Replies View Relatedhow I can create a similar looking image, I want to learn to make my spheres into perfect circles and I want to learn how they do the effect at the top center to gather all the words tightly at the tip.
View 1 Replies View RelatedI want to put text on a Christmas ornament. How can I make it look like it's actually printed on the 3-d sphere? I've tried warp text, but that doesn't look right either. Is there a way to do it? Is there some sort of text path tool and then I can apply warp?
I'm using CS2.
How should i do to fix them?
View 5 Replies View Relatedhow do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
View 2 Replies View Related