When I look at the LatLong choices while in the "Select Global Coordinate System", I see a longer list than I expected. Which of these choices is most consistent with the Latitude and Longitude system Google Maps uses?
View 1 RepliesI have a file in autocad with something like 24,000 points of objects that include the x,y coordination in autocad... so i export all the point to a text file because i want to have all this point in my database of my site (i am using Google maps to see all the point on the map) but, the problem is that the x,y point is not in the correct format like the Google maps need... an example for some point:
181447.163751433,643530.564881084
But i need it to be with latitude and longitude... any formula to change this xy point to longitude and latitude and i will do it with c# or there some other way to do it?
I have a customer who needs to have a precision of 5 decimal places for Lat and Long. Currently the style can be set to 4 (0.0001).
Any way to get 0.00001?
Point number, Lat, Long, Pole tag, Dams_ No, Height, Yr Installed, QSEC.
I have created a new point format with Point number, lat, long and the last 5 colums i created with User-Defined (data type is String)
When I import the point, it said doesn't match with point format.
Is there a way to create points using latitude and longitude. i have some borehole to be located on my project and the location information was given to as latitude and longitude.
View 4 Replies View RelatedI would like importing lat long points into Autocad Map 3D 2013. Once imported, the points need to be connected to form a line.
View 2 Replies View RelatedIs there a way to find the latitude and longitude of a point in an AutoCAD drawing?
View 4 Replies View RelatedI need to work with latitude and longitude, I believe there is a way to do this in autocad 3D Basics, but I can not remember how. How I could change the units to accept lattitude and longitude?
View 3 Replies View RelatedI am trying to create a Pipe Network table where my structures are located by Lat and Long. In the Table Component Editor under Properties I have a selection for 'Structure Northing' and 'Structure Easting' but I'm looking for the Properties Latitude and Longitude. How is it possible to add Lat and Long to my Structure Table?
View 6 Replies View RelatedThere seems to be a bug somewhere in the way Lightroom 4 is exporting GPS information.The GPS data is fine in the .xmp file and in Lightroom 4 (shows up on the map okay)but when I export the RAW file to a JPG then the GPS info in the file properties (Windows 7) reads like a 2 or 3 long integers (for example -2147483648; etc). This may be normal but when I import the file into Photoshop Elements 10, the GPS info appears as zeros and when I upload the jpg to flickr, the GPS info is absent.
View 14 Replies View RelatedI wish to input the GPS data (latitude, longitude) manually in the ways:
- Insert the value directly into the GPS field on the image (in map mode). It is pretty hard. In fact, I try to copy/paste value but I failed. I wish to be able to simply add manually GPS data to a picture.
- Move the map to a point giving llatitude, longitude. Maybe add a field close to "search".
I'm working on a project looking at modifying cycle routes. I just discovered that they've been added to google maps and I was wondering if there's a way to import the cycle routes from an area on google maps into CAD. If not, I can draw them in on the OS but it would be time wasted if there's a way.
I thought maybe on AutoCAD WS on chrome, but it seems limited on the mapping features available.
i m trying to import gmaps in to drawing.
i import it with drap image but problem is how to scale it.?
how to mache drawing and image?
How do you import a google maps tracklog made on my android phone with "my tracks" into the lightroom 4 map module?
View 8 Replies View RelatedI just installed Lightroom 4 and am trying to use the maps feature, but panning and zooming it is so slow that it is nearly unusable. I never had perf problems with LR3, and I've got a decent machine:
Windows 7 x64
4-core 2.8 Ghz CPU
8 GB RAM
NVidia GeForce GT 440
Using Google Maps on the web is as snappy as expected. Would installing Google Earth worth?
I am using Autocad LT 2013. I wish to use Autocad to draw subdivision lines and need to overlay satellite imagery (Google Earth or Google Maps) in tandem with Garmin GPS waypoints taken in the field.
In the 'type a command' ribbon, when I type in 'GEOGRAPHICLOCATION' and select 'Import the current location from Google Earth' (opens Google Earth, where you can retrieve a location to import).
Then a window appears which says 'Navigate to the location in Google Earth that you want to import before continuing (for best results, configure the view in Google Earth to look directly over the location that you want to import).
When I select 'continue' the command ribbon asks that I, 'select a point for the location <0, 0, 0>:
I have looked at the co-ordinates on google earth and attempted to enter but it does not feel right. Then says 'specify the north direction or (angle):s, then 'Point or option keyword required'.
Any way to have the ability to draw subdivision lines on satellite imagery. Garmin's Basecamp will allow drawing on top of google earth but I do not want tracks, I will only use the waypoints made by the gps device, but I need to draw measured lines that reflect the co-ordinates of the location.
I am using Autocad LT 2013. I wish to use Autocad to draw subdivision lines and need to overlay satellite imagery (Google Earth or Google Maps) in tandem with Garmin GPS waypoints taken in the field.
In the 'type a command' ribbon, when I type in 'GEOGRAPHICLOCATION' and select 'Import the current location from Google Earth' (opens Google Earth, where you can retrieve a location to import).
Then a window appears which says 'Navigate to the location in Google Earth that you want to import before continuing (for best results, configure the view in Google Earth to look directly over the location that you want to import).
When I select 'continue' the command ribbon asks that I, 'select a point for the location <0, 0, 0>:
I have looked at the co-ordinates on google earth and attempted to enter but it does not feel right. Then says 'specify the north direction or (angle):s, then 'Point or option keyword required'.
way to have the ability to draw subdivision lines on satellite imagery. Garmin's Basecamp will allow drawing on top of google earth but I do not want tracks, I will only use the waypoints made by the gps device, but I need to draw measured lines that reflect the co-ordinates of the location.
I would like to know if I can import my AutoCAD 3d file into 3DS MAX, with the lighting maps and material maps intact. This is because I am doing my thesis on AutoCAD 2011 but I would like to use 3DS Max to do a walk through video.
View 3 Replies View RelatedI've mapped a grid onto a sphere. The latitude lines look fine. But the vertical longitude lines come out wiggly!
I've tried different sizes of the grid graphic. I've tried rendering preference quality and rendering the file.
My laptop Dell Latitude E5420 is not recognising my camcorder. I tried with two of my mini DV camcorders, both of them are not recognised. When I connect through the IEEE1394 port on the laptop, it doesn't respond at all. In UL VS or any other video capture programs, the camcorder is not recognised, but only my laptop built in web camera is recognised.
Tried with changing IEEEE1394 host controller with Legacy in the Device Manager, but doesn't work.
I'm trying to load the Google Earth Extension in AutoCAD Map 3D 2011 on a 32 bit machine (XP)
I keep getting this error in Map: Import GE Image unknown command.
Demandload is set to 3. I have loaded the Google Earth.cuix. I have added it the support file search path.
We have it loaded on many machines that are 64 bit and have no problems. Is there something I have to do with the 32 bit machine?
What happened with Google Earth extension? I cannot find it in labs. I've installed Map2012 on new laptop and I'm sure I had Google Earth plug in on the old one.
with where do I find GE for Map 2012?
So I missed getting the extension by a day and every where I look for it just points back to the labs where it is no longer available. I used Autodesk CAD and REVIT full design suites 2012.
View 3 Replies View RelatedMonths back I did this project with multiple surfaces and exported them to Google Earth with no problem. Today, I'm trying to update a surface with some changes. After the changes, I tried to re-export it to Google Earth, but for some reason it's coming in really small. I have my units and zones set to what they have always been.The surface is highlighted in yellow, but it should take up roughly the size of the red circle.
View 3 Replies View RelatedIs this a Windows 8 issue or an Autocad issue? I mean this thing crashes at random. Its not like I'm runnign a lot...1 version of autocad....no other programs other than google chrome...We have a lot of macs runnign LT I think 2013 with no issues.
View 9 Replies View RelatedI am using AutoCAD LT 2010 and I am wondering how I can upload from my dwg file onto Google Earth? We do have one user at work who has a drawing that we believe was uploaded onto Google Earth from AutoCAD but it appears it is loaded onto Google Earth using a KMZ file. Would I need to create a KMZ plotter or am I looking in the total wrong direction when trying to get this onto Google Earth?
View 9 Replies View RelatedI saw a video on YouTube the Google earth extension for AutoCAD,Autodesk Labs search, but says that is not available for download, I need this plug in, extension of Google earth for AutoCad.
View 2 Replies View RelatedIs there a way to export a layer from Map 3D to google earth? It appears the built in google earth extension only exports linework that is part of the DWG and not GIS layers.
For example, I have arcview shapefiles of drainage areas for a storm drain report that have been connected to throught the data connect palette, and stylized through the task pane. I would think there should be an easy way to export this drainage layer directly to a KML file that can then be opened up in Google Earth. How to go about it other than converting a map to a dwg and then exporting it to GE?
I ran into a problem after just installing Civil 3D 2010 when I tried to import an image and elevation data from google earth. The message box says the following:
The Feature you are trying to use is on a network resource that is unavailable.Click OK to try again, or enter an alternate path to a folder containing the installation package 'Google Earth.msi' in the box below.
When I capture the elevation data from google earth, the elevations on the grid once in Autocad Map 3D are not the same as shown in google earth. It seems that the elevation have been scaled up.
View 1 Replies View RelatedI want to prepare base map by Google earth. How to prepare base map of Jeddah city only (Saudi Arabia). It show clear view of all road name etc.
How can prepared base map of Jeddah City so that it will use in our all autocad 2010 drawings.