Is this a Windows 8 issue or an Autocad issue? I mean this thing crashes at random. Its not like I'm runnign a lot...1 version of autocad....no other programs other than google chrome...We have a lot of macs runnign LT I think 2013 with no issues.
View 9 RepliesHow would you make tabs like the one in the screen-shot just using gimp?
[URL]
I am using Autocad LT 2013. I wish to use Autocad to draw subdivision lines and need to overlay satellite imagery (Google Earth or Google Maps) in tandem with Garmin GPS waypoints taken in the field.
In the 'type a command' ribbon, when I type in 'GEOGRAPHICLOCATION' and select 'Import the current location from Google Earth' (opens Google Earth, where you can retrieve a location to import).
Then a window appears which says 'Navigate to the location in Google Earth that you want to import before continuing (for best results, configure the view in Google Earth to look directly over the location that you want to import).
When I select 'continue' the command ribbon asks that I, 'select a point for the location <0, 0, 0>:
I have looked at the co-ordinates on google earth and attempted to enter but it does not feel right. Then says 'specify the north direction or (angle):s, then 'Point or option keyword required'.
Any way to have the ability to draw subdivision lines on satellite imagery. Garmin's Basecamp will allow drawing on top of google earth but I do not want tracks, I will only use the waypoints made by the gps device, but I need to draw measured lines that reflect the co-ordinates of the location.
Any good add on PIPING program for AutCad. We've been using CADPIPE, but every time that they do an update, their program changes default settings. It's getting to the point that it's time to look for a program that will work with autocad and not make me have to reset all of my settings every time I start Cadpipe.
View 1 Replies View RelatedI've a problema with autocad 2014 when I start it all programs are freezing about a variable period fron 30s at 1min.
With autocad 2013 I don't has problems.
I have just a general question regarding "File Removal" of the Beta Programs.
In the past there would have been a "File Removal" app to go with the beta's after the expiration however there was no app this year, (our expiration was May 31st). any associated problems with removing the beta's "Manually" this year?
I just installed 2013 on my pc yesterday. The first task I was given was to import a Google Earth image into AutoCAD to try to get some dimensions on a house for an exhibit. I open Google Earth and set my location to import, then I go to the Render tab, select Set Location, I click Import the current location from Google Earth, click Continue, then i get an error message saying Class not registered.
View 2 Replies View RelatedI am using Autocad LT 2013. I wish to use Autocad to draw subdivision lines and need to overlay satellite imagery (Google Earth or Google Maps) in tandem with Garmin GPS waypoints taken in the field.
In the 'type a command' ribbon, when I type in 'GEOGRAPHICLOCATION' and select 'Import the current location from Google Earth' (opens Google Earth, where you can retrieve a location to import).
Then a window appears which says 'Navigate to the location in Google Earth that you want to import before continuing (for best results, configure the view in Google Earth to look directly over the location that you want to import).
When I select 'continue' the command ribbon asks that I, 'select a point for the location <0, 0, 0>:
I have looked at the co-ordinates on google earth and attempted to enter but it does not feel right. Then says 'specify the north direction or (angle):s, then 'Point or option keyword required'.
way to have the ability to draw subdivision lines on satellite imagery. Garmin's Basecamp will allow drawing on top of google earth but I do not want tracks, I will only use the waypoints made by the gps device, but I need to draw measured lines that reflect the co-ordinates of the location.
Does you can still import a google earth image into civil 3d 2013 and if so what are the steps to do so.
View 5 Replies View RelatedHow can i import Google earth to the original coordinate system in 2013 autocad civil 3d?
In autocad civil 3d 2012 i imported google earth image and the program asked me about (use coordinate system for image location)
but how can i get it in 2013
how to import my alignment to google earth so that i can visualize how my alignment goes
as there is no link between google earth and civil 3d 2013
i am trying to make a usb pendrive but i did'nt get chrome material for the metal part of usb is it possible to make such type of materials in autocad itself. trying to getting this type of materials.
View 5 Replies View Related1. I have a centrifugal pump assembly in which the color is Blue.How can i save the same Pump which can be available with 5 different colors.other then the Blue.This would save me changing the color of the parts in the assembly everytime i want the Pump to display a different color
2. Part-0 attached. Can the chrome color be displayed without the reflections?
ver.2012
I am currently working with a company who is attempting to design AutoCAD symbols for an outside food service company.
How common is it to produce 2D symbols as well as 3D symbols? And, if 3D symbols are common, what programs are easiest/best to use?
Additionally, what are the standard set of views for the symbols? Just overhead? Or overhead and profile?
How or where to go to find out how to convert Autocad LT drawings into programs our CNC machining centers can use? Autocad assured me it would do this when we bought it. I just can't seem to find any info on it.
View 8 Replies View RelatedI'm trying to load the Google Earth Extension in AutoCAD Map 3D 2011 on a 32 bit machine (XP)
I keep getting this error in Map: Import GE Image unknown command.
Demandload is set to 3. I have loaded the Google Earth.cuix. I have added it the support file search path.
We have it loaded on many machines that are 64 bit and have no problems. Is there something I have to do with the 32 bit machine?
My school uses Inventor 2013 but I have 2014 at home. I dont have any complicated files but I cannot open 2014 files in 2013. How do I do that?
View 2 Replies View RelatedWhat happened with Google Earth extension? I cannot find it in labs. I've installed Map2012 on new laptop and I'm sure I had Google Earth plug in on the old one.
with where do I find GE for Map 2012?
When I look at the LatLong choices while in the "Select Global Coordinate System", I see a longer list than I expected. Which of these choices is most consistent with the Latitude and Longitude system Google Maps uses?
View 1 Replies View RelatedSo I missed getting the extension by a day and every where I look for it just points back to the labs where it is no longer available. I used Autodesk CAD and REVIT full design suites 2012.
View 3 Replies View RelatedMonths back I did this project with multiple surfaces and exported them to Google Earth with no problem. Today, I'm trying to update a surface with some changes. After the changes, I tried to re-export it to Google Earth, but for some reason it's coming in really small. I have my units and zones set to what they have always been.The surface is highlighted in yellow, but it should take up roughly the size of the red circle.
View 3 Replies View RelatedI am using AutoCAD LT 2010 and I am wondering how I can upload from my dwg file onto Google Earth? We do have one user at work who has a drawing that we believe was uploaded onto Google Earth from AutoCAD but it appears it is loaded onto Google Earth using a KMZ file. Would I need to create a KMZ plotter or am I looking in the total wrong direction when trying to get this onto Google Earth?
View 9 Replies View RelatedI saw a video on YouTube the Google earth extension for AutoCAD,Autodesk Labs search, but says that is not available for download, I need this plug in, extension of Google earth for AutoCad.
View 2 Replies View RelatedIs there a way to export a layer from Map 3D to google earth? It appears the built in google earth extension only exports linework that is part of the DWG and not GIS layers.
For example, I have arcview shapefiles of drainage areas for a storm drain report that have been connected to throught the data connect palette, and stylized through the task pane. I would think there should be an easy way to export this drainage layer directly to a KML file that can then be opened up in Google Earth. How to go about it other than converting a map to a dwg and then exporting it to GE?
I ran into a problem after just installing Civil 3D 2010 when I tried to import an image and elevation data from google earth. The message box says the following:
The Feature you are trying to use is on a network resource that is unavailable.Click OK to try again, or enter an alternate path to a folder containing the installation package 'Google Earth.msi' in the box below.
When I capture the elevation data from google earth, the elevations on the grid once in Autocad Map 3D are not the same as shown in google earth. It seems that the elevation have been scaled up.
View 1 Replies View RelatedI'm working on a project looking at modifying cycle routes. I just discovered that they've been added to google maps and I was wondering if there's a way to import the cycle routes from an area on google maps into CAD. If not, I can draw them in on the OS but it would be time wasted if there's a way.
I thought maybe on AutoCAD WS on chrome, but it seems limited on the mapping features available.
I want to prepare base map by Google earth. How to prepare base map of Jeddah city only (Saudi Arabia). It show clear view of all road name etc.
How can prepared base map of Jeddah City so that it will use in our all autocad 2010 drawings.
Just want to know whether Google Earth Extension is compatible for Window Vista? Because received an error message when i try to load Google Earth Extension into my AutoCAD Map 3D 2010. Below are the step that i've done:
Install Google Earth Extension - No error (so i assumed the installation success).
Appload - Successfully loaded.
Menuload - Error message occurred as shown below:
I am using the DWGPublishToGE tool in AutoCAD Map 3D 2012. I can get the images and blocks to finally show up in a fairly clear manner. I was using earlier versions of AutoCAD before and everything was exporting all choppy.
Now that I have the linework in I was hoping to accomplish two more things:
The line types aren't coming across properly (e.a.: dashed lines are continuous)The text, both within blocks and along the path, only comes in as text. It's not fixed to where it is in the drawing. For example, if I have a block with HH in it the line work comes in normally but the text part of the block does not.
See my two images I have attached. The first is the CAD version and what I am hoping to get to in GE. The second is what is happening in GE.
The AUGI Magazine (Page43) this month has information on a free download called CAD to Earth. Available Jan1, 2013. Is this the resolution to future downloading and using Google Images in our drawings?
View 6 Replies View Related