Photoshop :: Make Sketch Of Scorpion In One Stroke
Oct 14, 2013
I have a scorpion which I want to make it more perfect and simple. see attached pictures. my expectation isthe joints of scorpion could be more obvious, at least when it becomes small the joint could be saw perfect the joints.the strokes no more than 3, at this moment too many strokes, combine the leg, head, claws together like the bodyonly solid color could show a vivid animal,the leg is something that I don't have a better way to deal, if make it in solid color, it will be not vivid.it's better that show some aggressive,the claw could be more sharp and narrow than round one.Attachment 37931
View 9 Replies
ADVERTISEMENT
Feb 16, 2014
I am using CS5.5, and I was watching a video of someone using CS6 inking a sketch with a calligraphic brush that has black stroke and white fill. I am trying to do the same thing, but every time I select the fill color and start using the brush it goes back to "none" as the fill option. Is this a CS6 exclusive feature?
View 1 Replies
View Related
Oct 12, 2008
"open the brushes palette and select a 7px, hard edged brush. Adjust the Spacing to 356% and ensure nothing is selected and the new layer is targeted. Now click the Stroke Path Icon (which one's that?). By default, your foreground color will be used to create a dotted stroke."
View 2 Replies
View Related
Jan 24, 2013
Im using a tablet. I want to make my brush stoke very very short. Previously, I would do this by setting the fade to a very small number. I think I used to set it to airbrush but possibly it worked in brush as well. (I cant even figure out how to select an airbrush now) How do I do this in 6?
View 3 Replies
View Related
May 30, 2012
It's a right click command when using the pen tool and instead of doing that every. single. time...
it would be easier to just make a keyboard short cut but im not sure how to assign shortcuts to right click commands.
View 4 Replies
View Related
May 27, 2004
can change the size jitter on a brush stroke but can you make a stroke Ascend and Descend in size?
View 3 Replies
View Related
Sep 20, 2012
Anyway, I would like to use the Basic brush at half a pixel stroke and less like 0.25
However, when I type in 0.5 and then go to use the brush it just turns back to 1px
So, should I assume I cannot make a stroke smaller than 1px?
View 10 Replies
View Related
Mar 12, 2014
I have been a Photoshop hobbyist. Now I own a printing business. This has forced me into the world of Illustrator for our printing and cutting machines. Although I am very comfortable with PS, Illustrator. One of the key things is making "Cut lines" in Illustrator to send to the cutting program. Now here is my dillema, all of my images I have made are in Photoshop. To make these cut lines I have to stroke the image. When I bring a picture into Illustrator I can not get it to stroke that picture. It just strokes the box around it, or unless I draw a circle or shape around it and stroke that shape. Please refer to the picture I have attached. The first one is a decal that we initially made. The second is the image that I want to stroke for cut lines do I can just have that as a decal without the white circle.
View 1 Replies
View Related
Nov 1, 2012
I want the stroke above the elipse to be an eyelid for a cartoon. I want the part of the elipse to disappear that meets the stroke "eyelid" (see the left image).
I want the eyeball elipse to disappear as it goes into the eyelid stroke.
View 21 Replies
View Related
Jul 11, 2013
I made a selection with the Freehand-Tools and I need to make a Stroke in the selection line! How can I do this?
View 2 Replies
View Related
Jun 11, 2013
I think I remember this is possible in Illustrator, that you can make strokes that are for maps, like railroad tracks and the like. I need to make a 'zipper' and even the most simple line with cross perpendicular lines at regular spaces would do the trick for me. It's rather tedious to try to make these on a random direction path, but I need to know, is it possible to make a stroke that does this?
View 2 Replies
View Related
Sep 22, 2012
On this website is a logo for Okinawa, it has a stroke twisted into a ribbon. [URL] ...
View 5 Replies
View Related
Jan 17, 2013
I have a fabulous image of a painter's palette: [URL]
I want to show only parts of this image at a time, so that the viewer sees it in increments. However, I want to make the edges look more organic, like brush strokes, so that it looks almost as though the painting is being completed and the viewer gets to see the process.
p.s. I'm in CS2, unfortunately, so the bristle brush isn't an options
View 2 Replies
View Related
Dec 10, 2013
Why is the first dash shorter than the rest?
When I preserve the dash like this The first dash doesn't start at the beginning of the path...
So I looked up how to reverse the path and found this [URL] but my object options don't have the "reverse path" option
EDIT: I just realized that changing the direction of the path wouldn't work because it would mess up when it's too close to another path (although I still would like to know how to flip the direction regardless).
View 2 Replies
View Related
Feb 15, 2013
I've got some drawings that I've made in Inkscape and I would like to make them look more like they were drawn by hand. I know I found a tutorial for doing it some time ago, but obviously I didn't save the link. And when I try searching I only find how to make a sketch into vector or a photo into a sketch, and that's not what I'm looking for.
View 2 Replies
View Related
Oct 28, 2013
I am trying to make a 3d sketch into a solid. After trying everything I can think of, I admit defeat.
View 4 Replies
View Related
Jan 22, 2014
I need the frame of the image below as a stroke style (or at least I prefer that above having to copy-paste the elements of the sides 100 times along a frame in my design )
The thing is: it contains gradients. How do I get the frame to a stroke style so I can easily use it in Illustrator?
View 4 Replies
View Related
Sep 27, 2013
I cannot make a plane parallel to a surface and through a sketch point.
I can't also select the sketch point or line in order to make an axis. the sketch point, line from the sketch or anything from a sketch isn't selectable.
View 4 Replies
View Related
Dec 8, 2011
I have a sketch on a component. That component is being used in an assembly. The assembly drawing (.idw) does not show the sketch on that component. I have made them visible on the component, but don't want it visible on the assembly model. (only the assembly drawing)
View 1 Replies
View Related
Feb 10, 2012
I`m using Inventor 2012.When i select a new sketch from the New file drop down selection box ( new sketch picture) the XY plane is a different view to when i select a new sketch from the Part selection box (new sketch 1).
How can i make a default work plane when opening a new sketch?I would like to have the work plane identical to the new sketch picture when ever i open a new sketch file
View 3 Replies
View Related
Sep 14, 2013
Is there a way to make a custom vector brush smoothly meet at beginning and ending of the stroke, such as with a circle? I'm trying to create smooth circles with a brush and Wacom. I want a brush rather than a mathmatically perfect circle with a perfect stroke weight-thickness, but I don't like how the two beginning and ending join up. i like the slight variations of human imperfections one gets when using a vector brush, but there must be a way to make the joing points look more smooth, rather than an after-thought prgramming fault, right? Is it possible?
The image below shows my attempts to make as smooth a joint as possible, but it still looks too much like it wasn't meant-to-be.
I'm using Ai CS4, Mac OS10.8.4
View 6 Replies
View Related
Sep 12, 2013
Is there a way or an option I am missing to convert my regular paths to a path stroked with a brush profile,while maintining the proper stroke width?
For instance, I have a regular line with a stroke of 5 and then add a brush profile, which then converts the original stroke to whatever the brush was made at.
View 1 Replies
View Related
Aug 31, 2006
I work in Sketch-Up a lot creating urban streetscapes and such as I am the graphics person at a community planning consulting firm. Sketch-Up is great for quickly drawing and creating 3D models of screens; however, it is not good for producing a great looking final image to show to a client. What I want to do is export a 2D graphic from Sketch-Up and make it look like it was hand drawn. I am semi-proficient in Photoshop, meaning I can follow a tutorial and be able to tweak and apply what I learned to fit my needs but I can't seem to find something that gives me what exactly what I'm looking for. I've uploaded an image that represents the style I am looking for. This one was done by hand on tracing paper. I can't draw by hand to save my life so I want to create the model in Sketch-Up, export the screen as a JPEG, load into Photoshop and process to make it look like it was done by hand.
View 3 Replies
View Related
Jan 4, 2013
I have a shape with a black stroke and green fill. I have a white line segment over it. How do I get it so that the end of the line segment doesn't show over the black stroke of the object? If I try to put the line segment behind the object, then the object fill hides it completely.
I'm new to illustrator and I've tried to search for an answer but I don't know the best way to accomplish what I want to do. Seems like some combination of transparency or knockout groups and I've read a bit about this and can't figure out what I need to do.
View 3 Replies
View Related
Mar 24, 2014
I need an outline on a stroke that i drew but when i apply object>path>outline stroke i keep getting my initial stroke applied as well. I only need the outline, not the initial stroke. I use Illustrator CC.
View 4 Replies
View Related
Sep 21, 2011
I've created a shared sketch and have used it with various features. Sometime those features are suppressed. The model works fine but the shared sketch generates a sketch doctor error because the feature that created it has been suppressed. Is there anyway to make the sketch suppressed so it doesn't trigger a sketch doctor error? Inventor 2013
View 2 Replies
View Related
Sep 20, 2012
How do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
View 4 Replies
View Related
Dec 3, 2013
I was trying to query some sketch points data from a profile Path using code as below. However the program stopped without telling the reason.
Code below:
i = 0;
foreach (ProfileEntity oSourceProfileEntity in oProfilePath) { switch (oProfilePath[i].SketchEntity.Type) { case ObjectTypeEnum.kSketchArcObject: { SketchArc srcSkArc = default(SketchArc); srcSkArc = (SketchArc) oSourceProfileEntity.SketchEntity; // error points[i] = srcSkArc.StartSketchPoint.Geometry; break; } default: { SketchLine srcSkLine = default(SketchLine); srcSkLine =(SketchLine) oProfilePath[i].SketchEntity; // error points[i] = srcSkLine.StartSketchPoint.Geometry; break; } } i++; }
View 2 Replies
View Related
Aug 1, 2011
First we imported an ".igs" file to inventor, which produced "wires". Then by promoting the wires it produced a 3-d sketch.
The model is in one plane and 2-D, and we are trying to use Ansys 2-D analysis, but in-order to do so it needs to be in a 2-D sketch.
The model is too large to be redrawn on a 2-D plane, how to convert it to a 2-D sketch
View 9 Replies
View Related
Dec 14, 2012
want to change sketch 2013 into the sketch of 2010
View 1 Replies
View Related
Jan 28, 2013
Is there any way to make 2 to sketch lines instead of floating lines so that I can dimension them?
For example, if I have a part that can change lengths and I need to print off a new drawing, it would be good if I could say that the lines were a set distance from each end of the part or some features of the part.
Then I could update the part length, then just open the part drawing and not have to adjust anything.
View 1 Replies
View Related
