I have a photo, 2000x1500 @ 300 dpi. I cropped the photo.
When I cropped the photo, the canvas dimensions were 9.367inx7.68in.
I then loaded a blank background image and set the canvas size to the same dimensions.
I then copied my Cropped image and dropped onto my new background (canvas dimensions the same).
Now when I view the photo (nero or image viewer), I get white space above and below the photo. Yet when in Adobe, not white space.
Why does my cropped photo look like a broken page inside a version set with the original photo?
View 1 Replies View RelatedThis is an embarrassing question as i'm sure it's a basic photoshop tool, but I can't figure out how to take crops out of images, and merge them together to form one photo.
I have 4 photos of individual people, and I want to take equal 'slices' of them to merge into one- but still keeping the image the same size as a photo.
I know that my photo sizes are 3543px by 2362 px, and I know how to crop the images to the right size (885.75px by 2362px) but how to combine them.
Should I be using layers? I'm using CS4
I cropped the attached photo and printed it at 8x10 and the first time there was no problem but, when I tried again the print had horizontal lines spaced at about 1" apart on it. I switched printers but have the same problem with this and another cropped photo. Never had an issue before?
View 7 Replies View RelatedElements 7 used to place my photos in a new document and there was very little resizing to do. now with elements 10 and 11, my photos are placed way larger than the document and i have alot of annoying resizing to do on every one. There must be a way to change this.
View 2 Replies View RelatedI have Lightroom 4 and the plug-in LR2/Mogrify; which I purchased. I am trying to send my images at 300 dpi to a photo lab to produce 4x6 prints with a border at the bottom that is 10% of the short side, and the other 3 borders are 2% of the short side. I then add text for a size 25 pixel font. I am happy with this look when I export to the file folder on the desktop. When I upload to the photo lab, their software wants to resize my prints; where I loose my border or part of the image or the larger border with the words cut-off. I know I have to do something with the canvas, but I don’t understand what to do to get a fixed image size for a 4x6 print with borders and text. I need to know what the numbers are to imput in the Mogrify "background canvas" and how many KB to "compress to file size".
I have the "image sizing" at 6" longest edge, 300 dpi for resolution
I have the canvas at 1280 x 1920
The compression size at 300kb
With this I am losing the top border and the other borders now look wierd.
i use InDesign to design and Photoshop to convert to JPEG or TIFF....and i using these step when print/convert :
1. Print at InDesign using .ps or PostScript format.
2. convert it to PDF using Distiller with High/Press Quality Setting.
3. open PDF in Photoshop and save it to JPG or TIFF.
my text that i designed in InDesign always getting Cropped at Top or Bottom.This is the example at top of text "Th. 2013" is cropped... and sometime it getting worse.when i see the PDF file, it goes fine, no cropped text.
CS5 when I try to crop a jpg or psd file the image on my work area and the thumbs in layers go blank. When I hit "step backward" they reappear.
View 1 Replies View Relatedwhy is my raw image cropped when I reopen it?
View 6 Replies View RelatedOpen an image with some detail in the lower right area. Create a duplicate layer. Choose the crop tool. Make sure the option "Delete Cropped Pixels" in NOT checked.Grab the crop corner in the lower right of your image and move it diagonally inward somewhat. Confirm the crop.
Get the blur tool, make your brush size fairly large and brush the lower right of your image. Allow your brush to go beyond the border of your image.
Okay, when your image is noticeably blurred, switch to the move tool, grab your image and move it up and to the left exposing some of the area you cropped out.Ta-da! Isn't that pretty? It only happens with the blur tool. Try using the burn or dodge tool and this doesn't happen.
How?
View 4 Replies View RelatedI've cropped a 10 megapixel photo in Cs4 10X15 centimeters, but when I save it as jpeg file with maximum quality, the file is very small (200-500k)when I open it afterwards.
View 2 Replies View RelatedI have Photoshop CS3 and Windows XP. I used to crop pfds and the resolution stayed at the normal 72 default. Now when I crop the image shrinks very small and when I check in image size the resolution goes to 9999. But in preferences the resolution is still 72.
View 1 Replies View RelatedHow do you crop and save a cropped image in PS Touch?
View 1 Replies View RelatedThis problem just developed. When I use the crop tool either by double clicking or using the tool bar the image immediately shrinks to one pixel. P.S.CS3 running on OSX10.5.8
View 2 Replies View RelatedI am working on a MacBook Pro running 10.7.4 using CS6 and ACR 7.1.
I was shooting video with the 5DIII yesterday and shot a few stills as I was working. I shot in RAW for the stills. When I look at the still image in Photo Mechanic, I see the full image and Photo Mechanic tells me it's 5760x3840 in size.
When I open the image in Photoshop 6 using Camera Raw it shows up cropped 5760x3240 - the 16x9 video crop. But I can't get to the full image - the crop tool in Camera Raw doesn't let me reveal anymore of the image. How to see the whole photo.
Cropping problem. photoshop want to save the cropped file as a psd instead of jpg
View 2 Replies View RelatedUsing PS6 64 bit.
I bring in an image as a smart object, crop it (with 'delete cropped pixels' checked) and then attempt to add canvas on all sides. The image reverts to its pre-cropped size with the added canvas on 3 sides.
If I flatten the smart object before adding canvas, it works fine.
Is there any way to get this to work with a smart object?
When I use the crop tool, with "delete cropped pixels" selected, I expect that the image will be cropped destructively and that the cropped out portions will dissapear. But when I select one of the now cropped layers to drag it or free transform it, the cropped pixels are still there.
The entire original picture plane appears in free transform and in dragging the layer, the cropped out portions appear as if the image was never cropped. I recently upgraded from CS4 so this feature is completely new to me. Also, I use Windows8
I was wondering how to cut a round out of a square. I have this coin I am cutting out and find that by only erasing the background and then importing into my editor leaves some residual artifacts.
I would like to cut it out as a 'stand alone' circle without a background whatsoever.How to cut out the dime from the closely cropped background?
Not sure if you can tell there is a background as I did erase the background and save for "use on the web" with alpha BG. The background is evident in PS as a square that is as close to a round as possible. Which the sqare does show up in my video editing as a 'ghost artifact. Hence me wanting to crop that out as a round.
I have a really annoying problem when trying to use brushes. It existed in CS3 and is still there in CS4.
Whenever I make the brush diameter somewhat large, for instance above 100px, it begins to crop the brush outline so it only shows a small portion of it. If I make it large enough, ~500px, there's nothing left. Even if I have show crosshair enabled, the crosshair is cropped away.
I am running LR 1.4.1
Is there a way to save a cropped picture with a new name in the same album during the developing stage? I like to keep also the original picture.
How do I save cropped Images?
View 1 Replies View RelatedHaving cropped ~4x6 from a large photo, E11 will only print ~ 1/2 onto a 4x6. What to do?
View 1 Replies View RelatedI cropped a photo unevenly, and then added a stroke, but the stroke isn't coming up evenly.
View 1 Replies View RelatedI've been a long term Photoshop (elements) user, but rarely use it. I primarily use Aperture. I have a shot that I've printed successfully in 20 X 20 on aluminum and would like my next print to be bigger, 30 X 30 would be ideal.
I have a JPG Aperture export that measures 2318 X 2318 pixels. I was talking to a person at an art show this weekend, discussing my goal for this photo and he mentioned a feature of Photoshop that can take this image and basically adds more pixels. It's a 3 second motion shot in low light, so I'm not too worried about losing sharpness.
Here is a 1024 X 1024 export of the photo.
I am relatively new to Photoshop, and am using CS3. I would like to be able to create a collage with a background image, with superposed layers that are each an image cropped to a circle or ellipse. I found an article on how to do this with a heart shape using Photoshop Elements. He...using-Elements), but after a few paragraphs, the controls specified there do not correspond with CS3.
Preferably I would like each circle to be framed with a relatively thin colored border, to set them apart from each other and the background. Outside the border, the circular layers should be transparent.
I understand that I can create a simple circular shape that will show up as a layer and have a corresponding path, and that I can make a selection from the path.
I am fairly new to elements and I am having problems with resizing my images. I have cropped some images and want to upload them to say 'photobox' but I can't seem to get the images into the correct size for printing I.e 6x4, 7x5 etc. I have also noticed that I start with an image that is say 7mb in size yet when it has been edited and uploaded it is 700k and rated as a medium quality image ?
View 1 Replies View RelatedTif files when cropped and save as, seem to double in size. The crop tool is set at Unconstrained and the value boxes are empty.
e.g - Original 16bit Tif was 228.96 MB, 7304px x 5478px @ 300dpi, once cropped down to 7304px x 2390px @ 300dpi and saved as becomes 405.21 MB.
Using photoshop CS6 extended and OSX 10.7.4.
When merging groups in Photoshop CS6 (Command-E), the images are now being cropped to the document edge. I need to retain the image data for repositioning/sizing. This was not default behavior in previous versions and I can't find an option to change it.
View 8 Replies View RelatedI'd like to batch crop all while moving the cropped section with each file. This is for time lapse, so it will consist of about 500 files. I'm hoping it will give the effect of panning. I can do this in vegas but I have to zoom and pan AFTER the file is made. The zoom reduces the quality bad. My thinking is that if I can do this with picture files prior to making the video, the quality will be much better.
View 3 Replies View Related