I cropped the attached photo and printed it at 8x10 and the first time there was no problem but, when I tried again the print had horizontal lines spaced at about 1" apart on it. I switched printers but have the same problem with this and another cropped photo. Never had an issue before?
View 7 RepliesWhy does my cropped photo look like a broken page inside a version set with the original photo?
View 1 Replies View RelatedI crop a picture and when I print it white lines appear on the print . When I print the uncropped version of the same picture I get no lines . How can I get it to stop.
View 4 Replies View RelatedElements 7 used to place my photos in a new document and there was very little resizing to do. now with elements 10 and 11, my photos are placed way larger than the document and i have alot of annoying resizing to do on every one. There must be a way to change this.
View 2 Replies View Relatedhorrizontal lines in printouts-how to stop?
View 2 Replies View RelatedI am using Photoshop Elements 9 on a Mac (Lion) and I get horizontal lines when printing. I have eliminated printer error by using several printers and if I print direct from i photo there is no problem.
View 8 Replies View RelatedWhen I use the spherical filter in the horizontal mode in order to narrow the center of my picture slightly, the filter creates evenly spaced horizontal lines. Is there a way to avoid this? Here is the funny thing. If I rotate the image 90 degrees, then apply the filter using "vertical only" the lines do not appear. The lines only appear when I use "horizontal only"!
View 6 Replies View RelatedWhy do I get black horizontal lines when I print photos. I am using elements 10.
View 1 Replies View Relatedhow do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
View 2 Replies View RelatedI have a photo, 2000x1500 @ 300 dpi. I cropped the photo.
When I cropped the photo, the canvas dimensions were 9.367inx7.68in.
I then loaded a blank background image and set the canvas size to the same dimensions.
I then copied my Cropped image and dropped onto my new background (canvas dimensions the same).
Now when I view the photo (nero or image viewer), I get white space above and below the photo. Yet when in Adobe, not white space.
This is an embarrassing question as i'm sure it's a basic photoshop tool, but I can't figure out how to take crops out of images, and merge them together to form one photo.
I have 4 photos of individual people, and I want to take equal 'slices' of them to merge into one- but still keeping the image the same size as a photo.
I know that my photo sizes are 3543px by 2362 px, and I know how to crop the images to the right size (885.75px by 2362px) but how to combine them.
Should I be using layers? I'm using CS4
I have several cropped views in an Inventor 2013 drawing. I was wondering if Inventor could auto add a cut line to the cropped edge of objects when creating these views or alternatively if I would have to manually add a cut line through the symbols library ?
View 5 Replies View Relatedhow can i do that kind of thing (i'm talking about the little black lines ... ):
View 1 Replies View RelatedHow do I correct black lines running horizontally through a printed photo?
View 1 Replies View RelatedI dropped my digital camera last week and ever since every photo I take shows horizontal lines going across my picture on my camera screen. When I put the photos on my computer using Preview the lines appear to look worse but then instantly heal the line problem altogether.
Now my problem is this: When I open one of these images in photoshop the line problem reappears again and I can't seem to think of a way to get rid of it (like Preview did). And because the photos are so large the computer wont let me copy and paste the healed versions from Preview onto photoshop so I'm stuck with lines in all my pics. Now I'm assuming if Preview can totally heal my piece than photoshop should be able to as well.
I have Lightroom 4 and the plug-in LR2/Mogrify; which I purchased. I am trying to send my images at 300 dpi to a photo lab to produce 4x6 prints with a border at the bottom that is 10% of the short side, and the other 3 borders are 2% of the short side. I then add text for a size 25 pixel font. I am happy with this look when I export to the file folder on the desktop. When I upload to the photo lab, their software wants to resize my prints; where I loose my border or part of the image or the larger border with the words cut-off. I know I have to do something with the canvas, but I don’t understand what to do to get a fixed image size for a 4x6 print with borders and text. I need to know what the numbers are to imput in the Mogrify "background canvas" and how many KB to "compress to file size".
I have the "image sizing" at 6" longest edge, 300 dpi for resolution
I have the canvas at 1280 x 1920
The compression size at 300kb
With this I am losing the top border and the other borders now look wierd.
I am using windows 7/64 bit and my graphics card is Nvidia FX3700
View 1 Replies View RelatedI am using windows 7/64 bit and my graphics card is Nvidia FX3700.
View 1 Replies View Related1.How to make the vertical color lines in the picture below to be symmetric?
2.I would like to know how to make those lines on a layer like in the picture below,
Attachment 16845
How do I save cropped Images?
View 1 Replies View RelatedHaving cropped ~4x6 from a large photo, E11 will only print ~ 1/2 onto a 4x6. What to do?
View 1 Replies View RelatedI am fairly new to elements and I am having problems with resizing my images. I have cropped some images and want to upload them to say 'photobox' but I can't seem to get the images into the correct size for printing I.e 6x4, 7x5 etc. I have also noticed that I start with an image that is say 7mb in size yet when it has been edited and uploaded it is 700k and rated as a medium quality image ?
View 1 Replies View RelatedI am trying to figure out how to take a vertical photo and merge it into a black horizontal background in Photoshop CS4. I have to upload a vertical photo to a website that will stretch the photo to be horizontal if I don't do something like this.
View 3 Replies View RelatedI'm in PSE 10 and when I crop a small portion of an image and accept the crop, it remains a small image instead of snapping to a larger image like it did in PSE 6. I know there must be some way to have the small image automatically made larger rather than having to click on the magnifier and "+" and then on the image until it is a size I can work on. I've checked the FAQs and Photoshop Elements 10 but can't find the answer.
View 2 Replies View RelatedWhat should I do to “Layer 1” (the single image) to get-rid of those Horizontal and Vertical lines from pattern? While repeating as the Background Image into the HTML page, those Horizontal and Vertical lines does not look nice.
View 5 Replies View RelatedI designed back side of a business card with Arial font, When I printed cards I got horizontal little lines on besides and under text lines. On computer monitor it was only showing clear text in Enhanced view mode. When I changed view mode to Wireframe, then these lines shows on screen also. I only have text on this file, no background or any other object. I tried to change the font to other font types including Tru Type fonts also, but problem remained same.
I never had this problem with X5.
I want to make a height comparison chart of me vs some dragons from an Android Game... I know my height and I know the dragons' height but first I need horizontal lines across the canvas exactly the same distance apart before I can input numbers in...What is the best way to accomplish this?
View 2 Replies View RelatedI've taken a photo of a display frame, and I need to align it perfectly horizontal in order to not crop off parts of the frame when editing out the background. I know how to move images back and forth with the crop tool, but it's not very precise, and I definitely don't want the frame in the image partly chopped off because I can't get it angled just right.
View 13 Replies View RelatedMy Web Photo Gallery feature in Photoshop CS has all of a sudden started to rotate vertical photos to the horizontal position. In the finished gallery the thumbnails and large photos are rotated. When I open the images in Photoshop they are correct and in the vertical position. Any advice on reverting it back to the way it is supposed to be? I've looked through all the tabs and can't find where I might have accidently changed something to have caused this.
I did notice that when I just try to make a web gallery of only a few images they appear correct.
I cropped my picture from the white background and added a black Background and now i got a bright border around my watch
I found a guide via google which told me how to do that but this guide is for PS not PSE and in PSE we not have layer matting (or at least i din't found it) so my question is, is there a way to delete this "borders" from my image with PSE easy way? Or i have to delete them manually ?
Here is the Link to my Picture: [URL] ...:
I am Using PSE9 if that matters...
When an image is cropped using the cropping tool to a preset aspect ratio (without specifying a resolution), the resolution of the cropped image is different than the original. I'd like to be able to understand exactly how this new resolution is determined and be able to calculate it myself. The help section of the software just says, "If you use a preset size, the resolution changes to fit the preset." But I'd like to know the details of how the resolution changes.
How the resolution of the cropped image is determined in Photoshop Elements?