See image below. Stayed at Hilton across from Busch Stadium and washing their windows is not a big issue to them. I am attaching one of the worst ones but I cannot find a way to really fix any of them.
View 2 RepliesI'm a furniture maker in Japan, and usually take photos of my work on the road next to my shop. I like the texture of the blacktop. Using Gimp, I'm working up the learning curve, and don't know how to remove the white lines and dirt at the upper corners, and extend the pavement to cover it. I'm hopeful that with Gimp, it can be accomplished.
Attached File(s) rockingchair1.jpg (214.16K)
How to remove window reflections when taken from inside a bus.
View 1 Replies View RelatedWhat is the easiest way of removing brown lines/streaks from pic. I've attached a sample of the image I need to remove the streaks from.
View 3 Replies View Relatedin creating the new Panther desktop default screen i.e. the curved streaks effect.
View 2 Replies View RelatedIve seen a lot of this type of graphics pop up everywhere for sometime now. And i know from the animated clips that a lot of it is done in 3d. But if i were to create it in PS as a still frame, how do you go about making it look the way it does? I can imagine you could do it by creating lines and making copies of it and varying each a little bit, add some color overlays etc etc. And then there is the motion blur effect theyve got on it. Not sure how to go about that, but overall that looks like a lot of hard manual labour.
View 5 Replies View RelatedI need to remove the background image which is visible through a stained glass window and replace it with a soft plain background (simulating an ambient light)
I don't really want to artificially recreate the lead grid design and wondered what's the best technique (masking or otherwise) to preserve this detail? I am considering clone stamp, intelligent fill, masking etc. but first I need to create a source of the grid to use.
How do I eliminate vertical streaks in a printed picture?
View 3 Replies View RelatedWhat do you guys think - that the tag in her mouth is a real one which has just been tweaked or is purely computer generated?
View 3 Replies View RelatedDoes anyone know how to clean dirt from a photo without losing the texture or the original integrity of the pic? The photo attached has a layer of brownish dirt discolration evident around the collar and clothing. I imagine this would take hours to correct using the stamp tool. I'm sure there's a way to combine layers or something to clean this up without over-softening the photo.
View 1 Replies View RelatedHow do I remove the ad nag window from Corel in PSP X2?
View 3 Replies View Relatedhow to remove glare from window pane. I would like to know how to make a polarizer from scratch in action or CFX.
View 6 Replies View RelatedStreaks through their wipeouts when viewing pdf plots? It seems to come and go depending on how much you zoom into the plot. Attached is a simple example of what I am talking about, along with the source drawing, and a snip as I see it in Acrobat X.
View 5 Replies View RelatedIf I import the files from the camera disk directly into LR4, I sometimes get vertical streaks on the preview images.
Yet if I go to develop mode, the picture loses its streaks by merely entering and exiting crop mode without changing the image size.
If I import them from the pictures folder after they were imported through another program, I haven't had any issues. Go figure!
I have found a projet to make a patch of ground but it uses a mix to add grass, and I want only to have a patch of dirt with alpha on the edges, so it overlaps a huge plane of grass or snow or anything else I put under it.
But the path of dirt remains the same.
I tried to duplicate the thing but the edges look horrible.
[URL]....
Using Paint.net 3.5.10
I am trying to add some red bricks similar to the ones shown on the house to this dirt path.
I tried adding a layer, made it an overlay, and copying and pasting the bricks onto the dirt area. That didn't work. Tried using the clone tool and that didn't work.
Attached Thumbnails
I believe this issue started when I upgraded to Inventor Professional 2014. When I print idw files with shaded models on my HP Designjet 500 plotter I get white streaks in the shaded model. I never had this issue with the 2013 version of Inventor. If I export the same idw file to a pdf then print the pdf file there is no streaking and the printed drawing is okay. Thinking it was a Designjet issue I spent a couple days on HP's discussion group to find a solution but now it looks like a software issue.
View 9 Replies View RelatedI've been trying to work on my color matching skills (which are poor). The long term goal is to be able to match a sample texture's color with other texture samples that have been de-saturated then re-colored to match the original so that they can blend in and out of each other easily.
I'm using the attached image as a sample, then de-saturating it and trying to get the same color in the de-saturated image. I've tried using different mix modes, different base colors, playing with levels, colorize, and other plug ins - but I can never get quite the same color across the image. Its either too brown, too red, too yellow, etc. I was wondering what methods would be used to get a close to exact result - and for that matter, if it is even possible to color match only using 1 base color as a overlay (or other mix type)?
I've been trying to work on my color matching skills (which are poor). The long term goal is to be able to match a sample texture's color with other texture samples that have been de-saturated then re-colored to match the original so that they can blend in and out of each other easily.
I'm using the attached image as a sample, then de-saturating it and trying to get the same color in the de-saturated image. I've tried using different mix modes, different base colors, playing with levels, colorize, and other plug ins - but I can never get quite the same color across the image. Its either too brown, too red, too yellow, etc. I was wondering what methods would be used to get a close to exact result - and for that matter, if it is even possible to color match only using 1 base color as a overlay (or other mix type)?
My shot has reflections from flash in a window which I want to remove. The window has a curtain which covers part of the window. How do I sucessfully select the area of window and remove the reflection.
View 2 Replies View Relatedhow to calc dirt quantities in Civil 3D. Not just on roads, but say you have a small mountain of dirt that needs to be hauled away, and the contractor asks if you can quickly tell him how much dirt is there. And subgrade quantities for pads. Things like that.
First off, I'd need to learn the correct terminology. Knowing what to call stuff can at least make you sound less stupid when you ask a question.
HP DV7 Laptop
Intel Core i7-3820QM 3rd Generation Quad Core 2.7 GHZ CPU
16 GB DDR3 RAM ( 2 DIMM ) / 180 GB SSD
Nvidia GeForce 650M Graphics w/2 GB Memory
Windows 7 Professional 64 bit / AutoCAD Civil 3D 2014
Firstly, I cant get the reset preferences window to appear, as isntructed, by holding ctrl/alt/shift down and opening the application - I just get the details of the shortcut. tried on the actual.exe file and still dont get the window as described.
secondly, the hand tool does not seem to work? I select it, the 4 options appear in the tool bar above and the little hand Icon, but clicking and dragging on the file in the open window, has no effect, I cant move the file around the window as I supposed to be able to do.
I'm running PS CS4/mac on a Apple 30" display and have all my tool windows set up on the left side of the screen in three columns. When I open up a file, it is placed BEHIND my tools in the upper left hand corner so I have to keep moving it over to the right - is there a way when you open or create a new file that the window opens to the right of my tools?
View 13 Replies View RelatedUsing the zoom tool, there is a check box to select whether a zoom will also "Resize window to fit." Is there a way, using the _keyboard_, to select or toggle whether I want the window to resize when I use the zoom tool? I often want to go back and forth between asking for the resize and prohibiting it, but I don't want to have to go up with the mouse to click on that little check box all the time.
View 4 Replies View RelatedI am a student using Inventor 2013 Professional. I'm working on a project for school comparing levees made of different materials. I've created multiple levees from different materials. I can perform stress analysis on some of the levees, but when I try to do the simulation on levees made with dirt or sand, I get an error stating "Some materials are not defined correctly. Please assign a valid override material in the Assign Materials dialog." how I can create levees with these materials and perform the stress analysis on them like I can with metal and concrete levees?
View 4 Replies View RelatedThis is what I have. [URL]....
CS6
I used the magnetic and polyganol lasso tool to remove sections, after I drew a section, I pressed enter and then backspace, which made the section turn gray. But now it's just gray, on the same layer, and I can't do anything about it. I wanted an empty background under the image.
I can't use the magic selection tool because it DOES NOT select around the image properly (it selects INSIDE of the image) not where I cropped it out. And the magic selection tool is crappy. It leaves zig zagged white spots so why would I use that.
I cropped the entire thing out, and now I can't even see it without the background?
I'm using CS6 on my MacPro and and MacBook Pro (both running 10.6.8). When i use the crop tool on my laptop, an annoying black rectangle with dimensional data pops up whenever I crop. This does not happen on my desktop. I need this turned off on my laptop as well.
View 2 Replies View RelatedHow do I set the crop tool to remove background in Elements version 11?
View 2 Replies View RelatedI am talking about PSE 11. How can I move the tool-palette or the Video window on a second Monitor, as was possible in PSE 10?
In PSE 10 it was possible to use all tools in one palette with one click in the Quick-Mode. Now in PSE 11 we have to open each individual tool before we can use it? After the action this tool closed, so that we have to open it again in the next step. This takes much more time. Is ist possible to switch back to the arrangement of PSE 10?
I'm running Adobe Photoshop 7.0 in Windows 7 Virtual XP mode, since the program won't run in Win7 64-bit mode. It used to run fine in 32-bit mode. It runs OK in the virtual XP mode, but I find that the circle tool in the painting or clone stamp functions always has an arrowhead in the center of the circle. It never used to, just the circle for painting or cloning. How do I get rid of it? Changing the settings in the Preferences menu does not work. Also, the virtual mode doesn't seem to allow updating program files, although it updates XP files. I tried to download a Photoshop update file. There was a prompt asking where it should go. But when I selected a place, and clicked OK, the Next button did not come on.
View 10 Replies View RelatedI have a clipped image that I've placed a drop shadow on (using layer styles) on a transparent background. I want to quickly use the crop tool to remove any un-used pixels or artboard.
I tried to activate "show the layer edges", but it does not account for the layer style/drop shadow I've placed and also it goes away when you start to use the crop tool itself. So this doesn't really work.
Is there another way to do this? Other than eyeballing it? I want the image too be cropped as tightly as possible, but I do not want to tight too tight and cut of the drop shadow.