Photoshop :: Sweep Line Of Pixels On Axis
Feb 20, 2011
I am trying to sweep a line of pixels around an axis point in Photoshop (or Illustrator) to create a circle or multiple circles from the line of pixels. I have to use the line of pixels as it is a slice of an original image to capture a color swatch. I have not used Photoshop in close to 10 years and I cannot for the life of me figure out how I used to do it or if I did for that matter? I thought I used to, whilst I had the line of Pixels selected use the Transform>Rotate option then Adjust the pivot point.
Then I manually rotated it once whilst copying (Which I can no longer work out how to do) and just continue with cmd D or whatever the "do again" shortcut was?
View 5 Replies
ADVERTISEMENT
Oct 22, 2011
I have to draw a rather weird drawing with a lot of angled lines. Currently I'm using UCS to draw them but it's really tiresome.
I would draw 1 line, then type in UCS, select the X and Y axis, draw that line, escape, then hit in UCS again, rinse and repeat.
Is there a simpler way? I tried polar tracking "relative to last segment" but it still uses the x axis as the base, which is not what I want. I want the line to be the X axis.
View 8 Replies
View Related
Aug 25, 2010
Is it possible to automatically project the x-axis, z-axis or z-axis onto the sketch plane?
I.e. every time you open a new sketch the corresponding lateral and vertical axis will be projected onto the sketch.
View 9 Replies
View Related
Aug 15, 2013
I try to sweep along spline that made of elliptical arc and line.
Funny thing that I was able to create a solid few days ago by doing this method. Now I can't!
I tried even reload Autocad.
View 5 Replies
View Related
Dec 22, 2012
I am attempting to model an internal 1/8"-27 NPT thread, both the through hole and the tapered part of the hole are modeled, but after I draw the helix and the polygon and orient the polygon to the helix correctly, (or even if I don't, I have tried it) it keeps saying unable to sweep object. I am using Sweep with Alignment with the No option. If I select the polygon first, then click sweep, it works, but rotates the polygon so that what I get ends up looking nothing like a thread profile.
I have tried reducing the polygon radius down to a ridiculously small value, thinking it might have been interference due to a possible trig miscalculation, but with no success, still have the same issue. FYI, I am using a .037" turn height for 27 TPI and a polygon radius of .0214", with a helix small end radius of .177" and large end radius of .189".
View 9 Replies
View Related
Dec 31, 2012
Ok Photoshop tribe i need to put a line through another line stroked at about 4 pixels each line, the problem i am having is i need each line to be of a differing colour and slightly more translucent than the other.
View 8 Replies
View Related
Apr 13, 2006
The pencil tool line thicness or weight is measured in cm. Is there a way to make it measure in pixels?
View 1 Replies
View Related
Jan 29, 2014
Solution to getting a horizontal sweep to miter with a vertical sweep? Or maybe there is a way to pick a path? A feature in the full version that Autodesk deemed unnecessary for LT.
View 1 Replies
View Related
Feb 22, 2013
getting a horizontal sweep to miter with a vertical sweep? Or maybe there is a way to pick a path? A feature in the full version that Autodesk deemed unnecessary for LT
View 1 Replies
View Related
Apr 7, 2006
i have drawn some things in pencil,scanned into p-shop and i need 2 colour them but then have the same pencil detail go over the colours.the lines r not strong enough to stand out though.i tried coloring over the pencil layer in black(as pencil is gray) but this has made no difference.is there a way round this other than going over my 100 drawings in black pen?
View 4 Replies
View Related
Aug 22, 2013
I create a new layer and fill it with black. Then I make a new layer and make a marquee selection. Within the marquee selection, I fill the new layer with a color to transparent gradient fill. I then take the new gradient layer and warp it using the "FLAG" preset.
I adjust the bend to 20% and commit the warp/transformation. I get the curve I want, but right in the middle of the curve, running straight up the layer, is a solid line of pixels. It's almost as if, that one little line missed out on both the gradient itself as well as the warp effect.
View 7 Replies
View Related
Mar 27, 2013
Is it possible to create a circle from two given tangents and a center-line axis? For example, can this RED circle be derived in AutoCAD?
tan_tan_centerline.PNG
View 9 Replies
View Related
Feb 3, 2012
I seem to be having trouble with polar tracking on. With this activated and in front view I can only create a line in up or down (Y) direction. I cannot create a line along the z axis. This happens randomly so I must be overlooking a setting somewhere.
View 9 Replies
View Related
Nov 28, 2013
Struggling with an Educational version of 3ds Max 2013, and all of a sudden I can't seem to draw a vertical line (or shape) up the z axis in the perspective view -- I seem to be locked to the x/y plane and am loosing my mind...
View 2 Replies
View Related
Sep 12, 2005
If I am constantly making frames in photoshop for use in the video world (ie. They will be on TV) the pixels need to be rectangular (or 4x3) in aspect and not square.
I know in programs like After Effects and Combustion you can set when saving an image whether or not it is square or rectangular pixels.
How do I do this in Photoshop if it can be done?
View 1 Replies
View Related
Mar 25, 2013
i try to make an animation. I create a cylinder and i want to rotate it by longitudinal axis. i click 'components', select the cylinder and after i click 'position' to select the axis that axis system appears in the right side of the cylinder not in the middle. If i continue whit this settings the cylinder will rotate by a circle not by his longitudinal axis. How can i move that axis sistem in the middle of the cylinder? I can drag it but can't place it exactly in the middle.
View 1 Replies
View Related
Jan 25, 2013
I'm rigging a shoulder pad to a biped and I'd like it to only rotate on one axis. Google hasn't been that useful, and I hope I don't need scripting for this kind of minor thing. I'm rather new to 3Ds Max Design but I'm learning fast and liking it so far!
I've attached what I want to effectively accomplish. I'm looking for a way to lock the z-axis of the object with the upper arm's z-axis.
EDIT: Reduced picture size.
View 3 Replies
View Related
Oct 7, 2013
Is there any way I can extract the rotation of a block relative to the yz axis and xy axis. I can extract the insertion point and xy rotation but not the yz and xz.
View 9 Replies
View Related
Oct 15, 2012
2 days on GIMP. I need to adjust the clone tool so it's 1080 pixels vertical and about 20 pixels wide. I googled and searched, but I can't seem to find the right phrasing.
View 19 Replies
View Related
Feb 5, 2013
I have several layers in an image, and I need to align them precisely. The ordinary layer shift ("move pixels") by multiples of pixels is not sufficient. Is there a tool or plugin for PDN that allows sub-pixel shifts (i.e. moves by fractions of pixel)? And rotations by very small angles?
View 6 Replies
View Related
Dec 6, 2012
I've just started using Xara to edit my photos. I have a problem I can�t solve: how can I export the edited photos with 72 dpi and 843*403 pixels;or 72 dpi and 404*404 pixels?
View 9 Replies
View Related
Oct 9, 2013
I have a frame created as a sweep in a door family - but for some reason it always shows in blue linework, even when not selected. If this is to highlight an error or other issue with the model ?
It seems to have appeared after I deleted the cut opening outline and replaced it with a couple of Void Extrusions (to allow me to control the wrap of the plaster finish and not have it impact on the structural opening size).
The frame does sit within an extrusion void, but it is not selected to cut it.
View 9 Replies
View Related
Feb 13, 2013
On solidworks, There is an option to rotate the profile along the path as it sweeps. I'm curious if there is anything similar to that ability in Inventor? And if not, if there is a way to create a helix along a curved axis.
View 3 Replies
View Related
May 11, 2011
I have looked through these forums and found plenty of sweep problems and the answers to the problems but none for this particular type. I made a 3d intersection curve and am trying to sweep a profile along that curve but I keep getting the discontinuous segments error. I am using standard inventor 2011.
View 9 Replies
View Related
Jul 29, 2011
I making a glass panel with a metal trim for a bank window teller family. How do I control the lineweights for the metal profile?
It seems by default wide lines are being used. I don't see an option in the family editor to pick thin lines.
View 1 Replies
View Related
Jun 7, 2013
I have a tunnel profile that I need to sweep around a path. This path is a 3D Polyline but it has arcs and slope associated with it. The sweep command has this automatic banking or twisting to it that just screws everything up. The profile needs to stay perpendicular to the path and the floor of this tunnel needs to remain flat.
I have attached the actual working drawing. It has the profile (which is a simple typical tunnel) and the path all situated.I'm working in AutoCAD 2012 if that really matters.
View 9 Replies
View Related
Nov 13, 2012
I have applied a material to a wall sweep, but whenever the sweep turns a corner the material flips upside down.Note that the frieze is supposed to be on top.
View 3 Replies
View Related
Aug 1, 2013
Trying to create a 3D sweep. I want to keep the sweep parallel to the XZ plane (like a parting surface). In the attached part, there is a SweepSrf3 that has sort of what I am trying to do, but it does not go all the way around the path. Notice how the sweep is parallel to the plane. I tried to do the same thing in SweepSrf4, by selecting the 3D Sketch1 as the path, Sketch2 as the profile, and Workplane2 as the Guide Surface. That failed.
In SweepSrf4, the only way that I could get the sweep to come close to working was to use the 3D Sketch1 as the guide rail and the circle as the Path. Seems like I need to use the circle as the guide rail and the 3D Sketch1 as the path to get what I want... but that fails.
View 5 Replies
View Related
Nov 22, 2013
I'm trying to sweep it around shape like this But it won't, it says "The selected path curve is not valid." - so what do I do? (it is polyline) Is there maybe some other way to get this 3D shape fast?
View 8 Replies
View Related
May 29, 2013
How can I do the loft and sweep in acad 2000?
View 1 Replies
View Related
