AutoCad 3D :: How To Loft And Sweep In 2000
May 29, 2013How can I do the loft and sweep in acad 2000?
View 1 Replies
ADVERTISEMENT
AutoCAD Inventor :: Loft Or Sweep To Get Design Effect?
Jan 20, 2013Im struggling coming up with a loft or sweep to get the design effect I need. see on the pic how the profile terminates to a point.
View 4 Replies View RelatedAutoCAD Inventor :: Creating Seatbelt Using Loft And Sweep
Feb 16, 2012I work at a car seat company, and we are just now, starting to draw in Inventor. I have problems drawing the seat belt. Here is my first try:
I have tampered with this one! From this angle it looks ok, but it isn't right. I have tried using Loft and Sweep, but with no good results! The seat belt is static in the shown position, but should be able to adjust onto another seat.
AutoCAD Inventor :: Loft Two Profiles Around Helical Path (not Sweep)
Sep 13, 2013I am having a difficult time centered the helical path (the equation curve) and lofting the two profiles (centered) through the helical path in the axial rotation direction..
View 5 Replies View RelatedAutoCAD Inventor :: Flat Pattern Not Working With Loft / Sweep Feature
Oct 10, 2009Following on from my post regarding a sheet metal component that was unable to create a flat pattern due to creating the component in an assembly; URL....I have found out that it wasn't the in place component that was the problem it seems to be the loft and sweep feature that cause this problem. I have thought about using the extrude feature (as this works) to create the shape and then cutting the ends to get the angles I want but that would be time consuming.
I have set up the sheet metal rule to be 3mm mild steel, any way creating this component and being able to create a flat pattern.
AutoCad 3D :: Unable To Sweep Object When Attempting Helical Sweep For Pipe Thread
Dec 22, 2012I am attempting to model an internal 1/8"-27 NPT thread, both the through hole and the tapered part of the hole are modeled, but after I draw the helix and the polygon and orient the polygon to the helix correctly, (or even if I don't, I have tried it) it keeps saying unable to sweep object. I am using Sweep with Alignment with the No option. If I select the polygon first, then click sweep, it works, but rotates the polygon so that what I get ends up looking nothing like a thread profile.
I have tried reducing the polygon radius down to a ridiculously small value, thinking it might have been interference due to a possible trig miscalculation, but with no success, still have the same issue. FYI, I am using a .037" turn height for 27 TPI and a polygon radius of .0214", with a helix small end radius of .177" and large end radius of .189".
Revit :: How To Get Horizontal Sweep To Miter With Vertical Sweep
Jan 29, 2014Solution to getting a horizontal sweep to miter with a vertical sweep? Or maybe there is a way to pick a path? A feature in the full version that Autodesk deemed unnecessary for LT.
View 1 Replies View RelatedRevit :: Getting Horizontal Sweep To Miter With Vertical Sweep?
Feb 22, 2013getting a horizontal sweep to miter with a vertical sweep? Or maybe there is a way to pick a path? A feature in the full version that Autodesk deemed unnecessary for LT
View 1 Replies View RelatedAutoCad :: Exporting Drawings To Sap 2000
Jun 14, 2012I want to export my autocad drawings to sap200. Problem is the solids are not recognized (faces work just fine). The entity should be acaddb3dsolid, is this different from the normal 3dsolid?
View 0 Replies View RelatedAutoCad :: 2000 Conversion To 2010 64 Bit?
Jun 13, 2012We have been using Autocad 2000 32 bitfor many years and just recently upgraded the laptop with windows 7 64 bit and upgraded to Autocad 2010 64 bit. We cannot view the autocad 2000 drawings in the new autocad, it keeps freezing. I understand its a compatibility issue. How can we convert the drawings? I did download TrueView but it only gives me the latest option to convert to as 2007.
View 9 Replies View RelatedAutoCAD LT :: Opening 2000 Dwgs In 2012?
Apr 3, 2012Is it possible to open an AutoCAD LT 2000 drawing in AutoCAD 2012?
View 1 Replies View RelatedAutoCad :: 2000 Text Is Not Visible In 2014?
Oct 11, 2013I converted from AutoCAD 2000 to 2014 and now when I open up my old drawings some of the text does not show up. But if I go back and open it with 2000 it is still there. I found that if I convert the text to mtext it shows up. Is there a setting in AutoCAD 2014 that I can change so that this text shows up? I tried changing the annotation scale to see if that would do anything but it did not.
View 1 Replies View RelatedAutoCAD LT :: 2012 Backwardly Compatible With 2000
Oct 24, 2011I want to upgrade from LT2000 to LT2012, will I be able to read all my files created in LT2000?
View 1 Replies View RelatedAutoCad :: Converting DWG To Full-size PDF In 2000
Apr 21, 2012Using the plot command, I am able to convert my AutoCad 2000 drawings to pdf format but I don't know how to save them in their actual size. In other words, I have a drawing that should print on a 24 x 36 sheet in actual size, but when I save it in a 1:1 plot scale, only an 8-1/2 x 11 section of the 24 x 36 drawing is displayed. I think I need the ability to designate a 24 x 36 paper size but I don't see a way to do that.
I thought I could do that in Plot Device - Properties but there's no paper size option larger than 8-1/2 x 11. I have the PDF Converter, Windows system driver by Autodesk.What do I do?
AutoCad :: SAP 2000 / Import Concrete Canoe?
Nov 9, 2012I was having trouble importing the surface of my canoe into SAP 2000.
Attached is my canoe surface,
I read that SAP 2000 accepts autocad surfaces, so this should work
AutoCAD 2010 :: How To Access Autodesk Symbols 2000 On CD
Feb 11, 2013In AutoCad 2000 there was a design center that showed my symbols on the CD. Now I have 2010 and can't acess my symbols on the CD. I can't run the installl on the CD because I don't have admin rights.
View 2 Replies View RelatedAutoCAD 2010 :: Is 2000 Documentation Valid For 2012
Apr 24, 2013I have recently acquired AutoCAD 2012, I have a book called "AutoCAD 2000 Bible", and I was wondering if the contents of this book (based on AutoCAD 2000) can guide me through AutoCAD 2012 as well.
View 2 Replies View RelatedAutoCad :: Loading Alternative Plotter Driver To 2000?
Oct 30, 2013I am running AutoCad 2000 and using the plot-to-file option to create a file for use with a basic home workshop CAM system. This CAM system has been designed to run with data created using the Hewlett Packard plotter driver HP7470 but unfortuneately my version of AutoCad 2000 does not list this driver as an option under the Plotter Manager/Add a Driver tab. how I can go about finding and downloading a copy of driver HP7470 in order that it may be added to the list of options in the Add a Driver list?
I have tried using some of the alternative drivers listed in but all appear to give inaccurate or spurious results.
AutoCAD Visual LISP / AutoLISP :: Get Corresponding Z Value For Say About 2000 Points On Pipeline
Dec 19, 2011What I have is a topo plan in 3D (All contour lines have x, y and z values). My pipeline is on x and y coordinate only. I need to get the corresponding z value for say about 2000 points on the pipeline.
View 9 Replies View RelatedAutoCAD 2010 :: 2004 Version And Saved In 2000 Cannot Be Opened In 2012
Jan 21, 2013why few of the drawings processed in Autocad 2004 version and saved in autocad 2000 cannot be opened in different Autocad version such as 2012
View 6 Replies View RelatedAutoCAD Inventor :: Drawing File (Annotation Features Not Supporting 2000)
Aug 22, 2012I am using inventor 2013 and creating the drawing for a part or assy. and saving it to autocad 2000. after i open the saven .dwg fine in autocad 2000 of customised .dwg viewer (EDMS internal customised vault kind of software), i see some of the features of annotations and even mechanical features added has question mark (as the images attached).
Thing is what i am doing is and we have a BOB.shx file for the font. (which inventor is not supporting) and we could not bring this inside inventor. Inventor supports only .ttf font types.
So how way possible we can use inventor drawing inside autocad 2000 by save a copy as option. or you have any patch type support.We are loosing lot of time in this as a productivity loss.
AutoCad :: Command Within 2000 To Establish Center Of Gravity Of Solid Or Solids?
Dec 22, 2004Is there a command within AutoCAD2000 to establish the centre of gravity of a solid or solids?
View 7 Replies View RelatedAutoCAD Architecture :: Table From Data Link To Excel 2000 Cell Limit
May 5, 2011I struggled for a while this morning with trying to data link to a large door schedule in Excel. After several failures, I searched online for answers, and read in another forum that AutoCAD won't data link to more than 2000 cells.
My door schedule is about 2050 cells now, and will be about 4000 when done. I defined a set of about 1,000 cells in the Excel spreadsheet, and AutoCAD linked to it no problem. So, I tend to believe the poster who stated the 2000 cell limit, but I can't find this.
AutoCAD VB :: How To Loft Through VBA Code
Oct 14, 2008I'm doing a project for my paper and it would really save me some trouble if i could loft through vba..... the alternative is too boresome....
View 4 Replies View RelatedAutoCad 3D :: How To Get The Loft Dialogue Box
Jul 26, 2011Autocad used to perform the LOFT command partially in the COMMAND LINE and additional properties could be setted in the DIALOGUE BOX.
I used to draw my lofted elements :
1. Pick sections in order
2. Following Guide, Path,...
3. Dialogue box ( sections smooth fit, ruled, normal to,...)
4. Volume was drawn.
Nowdays it's a bit more extended but in step 2 when u pick a path the volume is drawn immediately and I can't append additional properties like in step 3.
Filedia is on 1
How do I get to the Loft dialogue box ?
Photoshop :: 7.0 Not Loading On 2000
Oct 13, 2003When I try to load up PS 7.0, it gets as far as "Initializng color preferences," and then just blinks off. I've rebooted and re-installed the prog, with no success.
(Obviously, or I wouldn't be here, yes?)
My ImageReady loads up fine, so I tried the "jump to" command to bring an image over to PS.
I get a response that it cannot jump because "Photoshop is not responding."
My OS is Windows 2000.
Photoshop :: Jpeg 2000
Nov 10, 2008I have CS2 and have loaded the plug-in for Jpeg 2000. I now find that I cannot save as an ordinary Jpeg. I know that 2000 et al is superior but a Jpeg2000 file cannot be read by many of the people I am in contact with re: family history.
View 3 Replies View RelatedAutoCAD Inventor :: Shell Out A Loft
Feb 27, 2012I need to shell out a Loft in the attached IV 2012 part file.The Loft i tried also as a new solid but the shell also cuts into the cylinder ( revolution 1 ) . I only want the 2 sides and bottom of the Loft to be Shelled, not the cylinder. What do i need to change to get the shell to work?
View 4 Replies View RelatedAutoCad :: Loft Two Rectangles Using Arcs
Feb 8, 2011I want to loft two rectangles using arc as a path , but i cant , 1st i cant draw the arc in 3d so i draw it in "Front" view , then i cant loft the rectangles using that arc as an path -"The selected entities are not valid" , maybe because i draw the arc in "Front"(bottom left), but i cant draw it in 3d?!! Here it is some screen shot:
View 0 Replies View RelatedAutoCad 3D :: Loft A Profile Between 3 Circles
Mar 17, 2012I'm trying to loft a profile between 3 circles and i have created 2 2d spline guides to loft through (see picture).
I get an error when i select the two splines as guides which says
"Modeling Operation Error:
The guide is not G1 between first and last sections. The selected entities are not valid"
The guides are definitely touching the profile edges so I'm not sure what the problem is.
Photoshop :: JPEG 2000 Plugin For CS3
May 9, 2008I am using a down loaded upgrade of Photoshop CS3. Since I don't have the CD, I tried to use the JPEG 2000 plug in from my CS CD, but CS3 doesn't seem to recognize it. Should the plug in from CS work in CS3? I have tried unsuccessfully to find the plug in as a down load.
View 4 Replies View Related