AutoCad :: Loading Alternative Plotter Driver To 2000?
Oct 30, 2013
I am running AutoCad 2000 and using the plot-to-file option to create a file for use with a basic home workshop CAM system. This CAM system has been designed to run with data created using the Hewlett Packard plotter driver HP7470 but unfortuneately my version of AutoCad 2000 does not list this driver as an option under the Plotter Manager/Add a Driver tab. how I can go about finding and downloading a copy of driver HP7470 in order that it may be added to the list of options in the Add a Driver list?
I have tried using some of the alternative drivers listed in but all appear to give inaccurate or spurious results.
View 9 Replies
ADVERTISEMENT
May 11, 2013
I have recently installed a computer system and the Plotter the client is using is a Canon W7200; Canon have refused to release any updated drivers and there were never any previous 64bit drivers that were created for this piece of hardware.
Are there any Universal Plotting Drivers? or a Generic one that can be used with all Canon Plotters?
View 8 Replies
View Related
Aug 26, 2012
I have a roland dx1100 plotter which I use for practicing plotting in autocad lt 2000i. I need to find a driver that will run in window 7. I found one from Roland that will run in windows xp.
View 2 Replies
View Related
Oct 13, 2003
When I try to load up PS 7.0, it gets as far as "Initializng color preferences," and then just blinks off. I've rebooted and re-installed the prog, with no success.
(Obviously, or I wouldn't be here, yes?)
My ImageReady loads up fine, so I tried the "jump to" command to bring an image over to PS.
I get a response that it cannot jump because "Photoshop is not responding."
My OS is Windows 2000.
View 4 Replies
View Related
Jul 7, 2011
I have started getting the message 'The configured Heidi driver was not loaded. Switching to the default software driver.'
This seems to happen when opening a drawing but sometimes at random.
View 5 Replies
View Related
Jun 20, 2013
How do I get the built-in PDF plotter quality up to my adobe pdf plotter. I want to do use publisher and make mulitple page pdf's and as I understand it I have to use the built-in plotter to do it. As of right now I have to sperate pages with adobe and then combie them to make a single pdf.
(how the built-in PDF plotter looks)
(How I want to have the built-in plotter look.) Without changing settings in my pdf viewer, I need to be able to send these out to customers.
I'm useing AutoCAD LT 2010
View 9 Replies
View Related
Nov 18, 2013
Trying to print from LR 5.3 RC using .icc profile in printer settings in Epson Pro 3800 driver the Color Settings and Color drop downs are disabled???? In other applications these options are enabled and selectable.
View 3 Replies
View Related
May 17, 2013
I currently have dynamic blocks that I insert into a drawing. Grip points modify them.
Ideally the user can stretch the inserted objects without needing the grip points so that they behave like normal drawing entities.
If I apply parametric constrains to a set of objects and GROUP them, the object behaves the way I want but I don't know how to insert the group or reference its properties. There are no parametric dimensions in the properties pane when a constrained group is selected. Is there an alternative to Block and Group that would allow this?
View 4 Replies
View Related
Jun 14, 2012
I want to export my autocad drawings to sap200. Problem is the solids are not recognized (faces work just fine). The entity should be acaddb3dsolid, is this different from the normal 3dsolid?
View 0 Replies
View Related
May 29, 2013
How can I do the loft and sweep in acad 2000?
View 1 Replies
View Related
Jun 13, 2012
We have been using Autocad 2000 32 bitfor many years and just recently upgraded the laptop with windows 7 64 bit and upgraded to Autocad 2010 64 bit. We cannot view the autocad 2000 drawings in the new autocad, it keeps freezing. I understand its a compatibility issue. How can we convert the drawings? I did download TrueView but it only gives me the latest option to convert to as 2007.
View 9 Replies
View Related
Apr 3, 2012
Is it possible to open an AutoCAD LT 2000 drawing in AutoCAD 2012?
View 1 Replies
View Related
Jul 24, 2012
I am currently using a FBK to run my auto-linework. I am having a problem generating curves, closing lines, etc... Everything works fine unitl I hit a curve or try to close a line. I have tried many different point code variations and the only one that worked on curves was a "BC1 BC, BC1 EC". Problem is I need multiple points on a curve to pick up laydowns, PVI's, etc... I tried the "OC", no "OC".......just about every variation I could think of to no avail. Is there an alternative to a FBK that works better?
View 9 Replies
View Related
Oct 11, 2013
I converted from AutoCAD 2000 to 2014 and now when I open up my old drawings some of the text does not show up. But if I go back and open it with 2000 it is still there. I found that if I convert the text to mtext it shows up. Is there a setting in AutoCAD 2014 that I can change so that this text shows up? I tried changing the annotation scale to see if that would do anything but it did not.
View 1 Replies
View Related
Nov 29, 2012
I know the 'move text to elevation' tool works quite well but the elevation is purely assigned to the insert point of the text object, which in some cases could be metres away from the point it refers to depending on how the text is formatted.
Any tool, lisp or otherwise, that will read the text elevation and assign it to the nearest point/block adjacent to the object?
View 9 Replies
View Related
Oct 24, 2011
I want to upgrade from LT2000 to LT2012, will I be able to read all my files created in LT2000?
View 1 Replies
View Related
Nov 15, 2012
Are there alternatives to the MS Office Excel for use in Inventor?
View 1 Replies
View Related
Apr 21, 2012
Using the plot command, I am able to convert my AutoCad 2000 drawings to pdf format but I don't know how to save them in their actual size. In other words, I have a drawing that should print on a 24 x 36 sheet in actual size, but when I save it in a 1:1 plot scale, only an 8-1/2 x 11 section of the 24 x 36 drawing is displayed. I think I need the ability to designate a 24 x 36 paper size but I don't see a way to do that.
I thought I could do that in Plot Device - Properties but there's no paper size option larger than 8-1/2 x 11. I have the PDF Converter, Windows system driver by Autodesk.What do I do?
View 9 Replies
View Related
Nov 9, 2012
I was having trouble importing the surface of my canoe into SAP 2000.
Attached is my canoe surface,
I read that SAP 2000 accepts autocad surfaces, so this should work
View 0 Replies
View Related
Feb 11, 2013
In AutoCad 2000 there was a design center that showed my symbols on the CD. Now I have 2010 and can't acess my symbols on the CD. I can't run the installl on the CD because I don't have admin rights.
View 2 Replies
View Related
Jan 23, 2013
I am drawing an airfoil profile in Inventor for use in a CFD package. I have a system of points which I am plotting and connecting via the spline function and extruding them to form my blade profile. However, when I open the drawing in the CFD programme, it is recognising the spline as a series of straight lines instead of one continuous enclosed shape. The CFD programme I am using require a negative (i.e a solid drawing of where fluid is flowing). I have attached the inventor file I have created.
View 3 Replies
View Related
Apr 24, 2013
I have recently acquired AutoCAD 2012, I have a book called "AutoCAD 2000 Bible", and I was wondering if the contents of this book (based on AutoCAD 2000) can guide me through AutoCAD 2012 as well.
View 2 Replies
View Related
Sep 13, 2013
my animation takes around two seconds to load within my browser. Is there a way to display a loading symbol such as spinning circle, that will show the animation is loading, then disappear once it is ready to display?
View 2 Replies
View Related
Jan 22, 2014
I'm currently working on a site which is almost 95% complete. The loading time for the site is approx 7-10 seconds which seems to be slow. I have placed a preloader but that doesn't seem to be coming up while the site is loading.
Is there anyway to speed up the loading time. Like some code that will tell it load specific number of frames first and then load the rest in the background?
I have compressed the images that are being used but cannot compress further as they may lose the quality.I've got the preloader working and now it seems to be showing up while the site is loading. Is there any way to speed up the loading time.
View 3 Replies
View Related
Oct 5, 2012
Where to find/import alternative material styles
egg. AISI 301? EN 1,4310?
Working white sheet metal parts an missing a lot of materials. I know how change the existing materials, but would rather import them from the web.
View 6 Replies
View Related
Dec 19, 2011
What I have is a topo plan in 3D (All contour lines have x, y and z values). My pipeline is on x and y coordinate only. I need to get the corresponding z value for say about 2000 points on the pipeline.
View 9 Replies
View Related
Jun 19, 2012
I've created a copy of my centerline alignment using the "Create Alignment from Existing Alignment" and was going to edit the new alignment to explore different options. But the new alignment can't be editted. It's lost something in the translation. There is no grip edit for the PI, that the original alignment has.
Civil 3D 2013 SP1
Dell T3500 Workstation
Intel Xeon E5630 @ 2.53 GHz
12 Gig of RAM
Nvidia Quadro FX3800
Window 7 x 64bit OS
View 6 Replies
View Related
Nov 3, 2011
I need to show feet and meters in my drawing. I got them to show up, however the decimal is in the wrong spot. Instead of it being 1.8288 meters for 6 ft., it's showing as 1828.8. Everything I read says to 'just move the decimal'. But how do I do that without overriding the actual dimension?
View 4 Replies
View Related
Mar 5, 2013
I have a folder that contains subfolders, then more subfolders. All these folders contain Inventor files. There are few different models there with drawings and related files...
I need to make an exact copy of the folder at different location in Vault. To use Copy Design tool, I would need to do it few times, as there are few totally separate files in the folders.
Now, is there a way of taking main folder with its all contants and just copying/renaming it to other location? It would save me lot of time.
View 2 Replies
View Related
Jan 21, 2013
why few of the drawings processed in Autocad 2004 version and saved in autocad 2000 cannot be opened in different Autocad version such as 2012
View 6 Replies
View Related
Aug 22, 2012
I am using inventor 2013 and creating the drawing for a part or assy. and saving it to autocad 2000. after i open the saven .dwg fine in autocad 2000 of customised .dwg viewer (EDMS internal customised vault kind of software), i see some of the features of annotations and even mechanical features added has question mark (as the images attached).
Thing is what i am doing is and we have a BOB.shx file for the font. (which inventor is not supporting) and we could not bring this inside inventor. Inventor supports only .ttf font types.
So how way possible we can use inventor drawing inside autocad 2000 by save a copy as option. or you have any patch type support.We are loosing lot of time in this as a productivity loss.
View 1 Replies
View Related
