Photoshop :: Single Image Into One Panoramic Image
Jun 3, 2009
I am trying edit photographs for website production and I am using an already made wesbite template. However, the images that are already on the template are not the same size as the photographs that I am wanting to put on it. The template image size listed is as follows: Pixel Dimensions are W939xH373; Document Size W13.042xH5.181; Resolution is 72. The photos that I want to use are normal size from the camera. My question is this: Is there a way to convert the size of the image into what is needed without the photo being distorted and look elongated? I am using Photoshop CS3.
View 4 Replies
ADVERTISEMENT
Aug 23, 2005
The attached panorama is a composite of 4 other images. I am very satisfied with the overall result since there is a minimum of distortion and the color is more than decent. I am not satisfied with the two gray triangles that are in the center of the image. What would be the best way to get rid of those shadows? Is it possible to adjust the images prior to making the panorama which would reduce or eliminate those gray triangles. I should point out that the 4 images used were "perfect" without any gray areas.
View 9 Replies
View Related
Oct 6, 2004
I have stitched together some photos from my Canon digital camera using the bundled software to get a panorama photo in jpeg format (the photos were taken in panorama mode on the camera). Now I want to do something seemingly simple: split up the huge created image (14251 x 1596) into handy 6x4 chunks so I can upload them to ofoto (or whatever) and get them printed as cheap 6x4 prints that I can paste together on my wall. So for 6x4 I'd like to split it into 2394 x 1596 images at the original quality (with the last image in the set being padded with white so it matches the other slices in height). I've tried using the slice tool in photoshop 7.0 but there there are 2 problems: a max slice width of 1000 pixels and Image Ready only allows creating a useless gif file. Any ideas (apart from writing the tool myself in Java or C)?
View 2 Replies
View Related
Dec 7, 2004
To resize an image like a panoramic television. The center is resized little, and the edges more. The image will appears distorted less than with the traditional method.
View 9 Replies
View Related
Apr 30, 2009
I have a Epson R2880 and want to print a series of panoramic prints on it, i have set up the print to be 8x24 inches. When I open the panoramic and give it the size of the paper, CS3 automatically resizes the print, so if i set the image to 8x24 the height of the actual picture is either 8x40 or 3.78x24 .... is there a way to get a real 8x24 print or will CS3 always resize to a fixed set of dimensions ?
View 2 Replies
View Related
Oct 29, 2011
How to use a 360 panoramic image as a background in 3ds max. Each time I have tried it, the background image appears too close to the camera, making my objects look small. No matter how big the image is in pixel dimensions, it always appear too large in the viewport; there's no setting in 3ds max to scale it back so that it looks farther away from the camera. I seen ones that use a background image and use camera matching to line up the camera, but I need to have the background setup so that it does not matter where the camera is pointing.
View 3 Replies
View Related
Jun 21, 2008
I would like to know how to change the colour of a single layered, single coloured gradient (foreground to transparent) image. There is nothing more to it than that other than I don't want to use the hue/saturation adjustment as it's hard to get a specific colour.
View 7 Replies
View Related
Jun 26, 2012
I'm trying to erase all of a single colour from an image. I use the colour range select to choose the colour (orange) however when I erase, it seems to erase an underlay underneath colours (esp yellow) in unselected areas.
How can I stop this?
View 1 Replies
View Related
May 20, 2004
I'm desiging a banner for a website and a big concern of mine is that the sidebar should fade into the black default background of the website.
It's a single layer, the image is 32 x 346 pixels and I'd like to know how to blend the bottom quarter or so of the multicolor sidebar to the default black.
View 1 Replies
View Related
Feb 6, 2013
I want to divide up a bunch of scanned in photos quickly. I have 4 or 5 photos . Aligned next to each other in each scan.
View 5 Replies
View Related
Sep 17, 2013
I have 256 images that are all set out as a testure and need to combine them all into a single image. Each image is 256x256 so the final image will be 65536x65536 is there any possible way I can combine all images without placing each one manually?
View 5 Replies
View Related
Jun 30, 2013
I am getting triple images on the work area from tool icons such as the crop tool, hands, etc. How do I get back to single image. I have reinstalled CS4 and windows 7 but have the same problem.
View 3 Replies
View Related
Aug 11, 2012
How to convert 100 jpg images into single png using Photoshop in single action?
View 4 Replies
View Related
Oct 30, 2013
I would like to replace a range of colors with a single color in an image.
I know there is the replace color adjustment, but this replaces a single color e.g. 190,190,190 with another color e.g. 200, 200, 200. I would like to replace a range of colors e.g. from 185 to 195 with 200, 200, 200.
View 1 Replies
View Related
May 15, 2012
Recently when I upload photographs in Photoshop Elements 8, the images in the catalogue appear as an hourglass when viewed as multiple images, but when I zoom in to a single catalogue image the picture appears. Previous images in the cataloge appear as normal.
View 2 Replies
View Related
Feb 25, 2012
basically i have the need to create a wallpaper, i haven't done one in some time, not a decent one anyway. and I'm having some slight trouble.
I Have this image so far:
and i need the background area behind the soldiers to span across the whole canvas, creating a gradient and adding the smoke in will take ages and it probably wont look as good as hoped. my clone brush tool doesn't work because of a thing ubuntu has with the alt key, it stops me defining a source point the healing brush gets nowhere but where the Pixels are already not beyond.
I'm currently contemplating grabbing the end witht the select, duplicating it and blurring it, whether or not it looks daft is another matter.
View 2 Replies
View Related
Nov 18, 2011
I'm using autodesk inventor 2010 and am having problems when inserting an image onto my model. Basically I select insert image then pick the bitmap picture but when I position it, it multiplies but stays in one grouping meaning I cant isolate one image.
View 8 Replies
View Related
Apr 28, 2012
What should I do to “Layer 1” (the single image) to get-rid of those Horizontal and Vertical lines from pattern? While repeating as the Background Image into the HTML page, those Horizontal and Vertical lines does not look nice.
View 5 Replies
View Related
Feb 9, 2012
Is there a plug in similar to photoshop that allows for a full cut out of a single item in a image?
If not is there a thread that shows a simple process to do so?
View 5 Replies
View Related
Oct 30, 2013
How do I know which collectios my single image is in? Is it in one collection? Is it ten colelctions? How can i find out? If I click a single image, it doesnt highlight all the possible locations the image resides in. Am I missing something?
View 2 Replies
View Related
Dec 11, 2013
I'm operating on an iMac, OS 10.9, brand new, lots of RAM etc. I've confirmed with Apple that my computer and ext HDs are working fine. That said, using LR5.2 I'm unable to import, even a single image. I'vre tried rebooting LR, rebooting the external HD, rebooting the computer. Nothing works.
View 4 Replies
View Related
Jan 5, 2013
I can use the "/" key to deselecting the current photo but how do I select the current photo with the keyboard? Usually the space bar is used for this but that displays the image. Is the only way to select the current photo by using the mouse?
View 8 Replies
View Related
May 1, 2011
I know I saw a video on how to do it from scratch, but I dont remember now. Why does it update all the images in a row? and how do I just update 1? place it on a new layer?
View 2 Replies
View Related
Jan 11, 2013
I have a picture in Illustrator CS3 and I'm trying to make a vector for a t-shirt. I want to remove the brown background, but I'm unable to select the background. I select image, live trace etc (6 colors), but stil unable to select only the background, only the whole picture. Not sure what to do here.
View 3 Replies
View Related
Feb 23, 2013
I am using Photoshop Elements 10 on Win 7 PC. I am trying to print multiple copies of one image on a single 8.5x11 sheet of paper? The images are artwork for buttons (to be used in button-making machine) so the dimensions must be exact on the duplicated images. When I select Picture Package, the images are resized to fit the dimensions in the picture package. When I select Contact Sheet, the images are resized to fit the number of columns I selected. Neither is acceptable. How can I repeat the same image on a single piece of paper without having the system re-size the image? I know that I can manually create a new PSE file and manually insert the images into this file. This is what I have been doing as a work-around.
View 2 Replies
View Related
Aug 16, 2013
My drawing has different layers and I need these layers to be different PNG images. How can I do it?
currently, I use the very silly way to do that: unhide only one layer and select this layer to export one layer by one layer. Whether Corel draw has export image from different layer, or there is additional tool can do that?
View 6 Replies
View Related
Apr 30, 2012
Let me start by describing my needs. I need to generate proofs for my shoots. I'd like to export images with different aspect ratios for target devices, ie iPad, Android phone, 16:9 TV, etc. What would be really great is if I can select a named "crop setting" in the export window and generate JPGs based on the chosen setting. I've searched all over the place, all seem to talk about presets, virtual copies, etc, which really doesn't address what I want.
Fundamentally I'd like to be able to save a handful of crop settings (unique crops but with common names) for each image. I will create the crops manually as I have to pick the position and size for each carefully. For example, on a 4000x6000 image I have these crop settings (for a fairly small area of the image):
1. iPad [settings: top-left coordinate (500,500), ratio 4:3, width2000]
2. Android [settings: top-left coordinate (500,400), ratio 8:5, width 2400]
3. HDTV [settings: top-left coordinate(500,450), ratio 16:9, width 2200]
As you can see each crop is different becasue I want to be precise about how the cropped outputs look. Then at export time, I want to be able to multi-select a bunch of images and pick say "iPad" crop setting to create the JPGs in a batch.
Is there a custom plugin outside of Lightroom that can handle this?
View 19 Replies
View Related
Jul 3, 2013
I am using LR5 and am trying to print a single image using print package in the centre of the page, equal borders on all 4 sides.
View 2 Replies
View Related
Dec 4, 2013
am new/ novice trying lightroom free trial download. how do i type in a titlle to a single photo image file?
View 2 Replies
View Related
Jan 10, 2012
I'm having an issue printing to a Panasonic DP-C322 PS printer. I send my image and ask it to print multiple copies. The result is just a single copy of my image. If I use the PCL driver, the image prints in multiples, as expected.
View 1 Replies
View Related
Jun 28, 2012
When I cut, and copy an image to the clipboard and then paste the image into a new, blank page, it pastes the image multiple times (about 20) on the one page. How can I revert to it pasting just one image?
View 1 Replies
View Related
