3ds Max :: How To Use 360 Panoramic Image As Background
Oct 29, 2011
How to use a 360 panoramic image as a background in 3ds max. Each time I have tried it, the background image appears too close to the camera, making my objects look small. No matter how big the image is in pixel dimensions, it always appear too large in the viewport; there's no setting in 3ds max to scale it back so that it looks farther away from the camera. I seen ones that use a background image and use camera matching to line up the camera, but I need to have the background setup so that it does not matter where the camera is pointing.
View 3 Replies
ADVERTISEMENT
Jun 3, 2009
I am trying edit photographs for website production and I am using an already made wesbite template. However, the images that are already on the template are not the same size as the photographs that I am wanting to put on it. The template image size listed is as follows: Pixel Dimensions are W939xH373; Document Size W13.042xH5.181; Resolution is 72. The photos that I want to use are normal size from the camera. My question is this: Is there a way to convert the size of the image into what is needed without the photo being distorted and look elongated? I am using Photoshop CS3.
View 4 Replies
View Related
Aug 23, 2005
The attached panorama is a composite of 4 other images. I am very satisfied with the overall result since there is a minimum of distortion and the color is more than decent. I am not satisfied with the two gray triangles that are in the center of the image. What would be the best way to get rid of those shadows? Is it possible to adjust the images prior to making the panorama which would reduce or eliminate those gray triangles. I should point out that the 4 images used were "perfect" without any gray areas.
View 9 Replies
View Related
Oct 6, 2004
I have stitched together some photos from my Canon digital camera using the bundled software to get a panorama photo in jpeg format (the photos were taken in panorama mode on the camera). Now I want to do something seemingly simple: split up the huge created image (14251 x 1596) into handy 6x4 chunks so I can upload them to ofoto (or whatever) and get them printed as cheap 6x4 prints that I can paste together on my wall. So for 6x4 I'd like to split it into 2394 x 1596 images at the original quality (with the last image in the set being padded with white so it matches the other slices in height). I've tried using the slice tool in photoshop 7.0 but there there are 2 problems: a max slice width of 1000 pixels and Image Ready only allows creating a useless gif file. Any ideas (apart from writing the tool myself in Java or C)?
View 2 Replies
View Related
Dec 7, 2004
To resize an image like a panoramic television. The center is resized little, and the edges more. The image will appears distorted less than with the traditional method.
View 9 Replies
View Related
Apr 30, 2009
I have a Epson R2880 and want to print a series of panoramic prints on it, i have set up the print to be 8x24 inches. When I open the panoramic and give it the size of the paper, CS3 automatically resizes the print, so if i set the image to 8x24 the height of the actual picture is either 8x40 or 3.78x24 .... is there a way to get a real 8x24 print or will CS3 always resize to a fixed set of dimensions ?
View 2 Replies
View Related
Aug 24, 2011
I seem to be having problems when I lasso round a specific part of a photo taken with a white background and then try to add that part of the image to a plain #000000 black background.
I always seem to get a white outline around the image when I place it on the black background, even when its on ZERO feathered. I don't like using feathered as it adds a smudge round the outside of the image.
View 9 Replies
View Related
Jun 17, 2006
I am using my CS2 on OSX and when I view the image in a full screen mode the color around the image is grey, well it used to be grey but it is blue now. How do I change it back to neutral grey?
View 3 Replies
View Related
Apr 6, 2009
I know a landscape can be stretched into a panoramic in CS4 but, where to find the tools & how to do it.
View 9 Replies
View Related
Jan 17, 2008
i tried to use polar coordinates, but as you get to the outer part of the circle, you see that the picture spreads and you get that blur to it. i want to know how you make it go out from the center and not get that side effect.
View 4 Replies
View Related
Jun 30, 2013
I have a question about using Panoramic. I shot a quick 3 pics I wanted to stitch together. I was wondering if there is a manual way to stitch them together?
I used Bridge>Tools> Photshop.PhotoMerge>Reposition and Auto ~ Ended up with this. (see pic) I would like to stitch these together if possible. I am practicing for making Environment layers in After Effects.
View 4 Replies
View Related
Feb 6, 2005
I have a problem with a couple of photos that I want to stitch
for a panoramic.
The picture I have attached shows how one or both of the images
need adjusting so that their exposures 'match'
View 4 Replies
View Related
Aug 8, 2008
I want to make a panoramic picture to say something like 20"x10" using cs3, when i go to upload it to a printing company i.e. photo box, the image always appears smaller.
I have tried using Genumne Fractals 5 but i do not seem to get any luck there either.
What i need is a complete idiot`s guide on how to create and print succesfully a panoramic image.
View 9 Replies
View Related
Jan 30, 2012
Is it possible to create a panoramic photo in LR3 without having to purchase CS5 ?
View 2 Replies
View Related
Jul 4, 2012
I have been tasked with creating a time lapse video of a building being built. I have been supplied with the time lapse pictures that go back over 18 months so there are a large number of files.
Â
The problem I have is the pictures were taken by a motorized web cam - basically it took a picture to the left, move about 40 degrees take a picture straight then another 40 degrees and took a picture right to fit the whol building in. 3 shots were taken a minute so for every minute there is the whole building.
Â
When initially looking at the 3 seperate shots it looks like it would be fine for them to line up BUT there is a problem. The left and middle pictures have a small amount of overlap and can be automatically stiched together BUT the picture on the right will but up but has no overlap, is there anyway I can automate 2 different functions on the 3 pictures or do a 2 step automation that would firstly stitch the left and middle pic then but up the right pic to the joined images already stitched.Â
View 2 Replies
View Related
Jul 15, 2013
Trying to figure out how to create 3d 360 degree spherical panoramic. All my searches come up with older versions. CS6 does not have the 3d menu so where do I find out how?
View 6 Replies
View Related
Dec 24, 2011
I saw a tutorial on youtube and it is something I will like to do on my own. But with the tutorial, I have tried over and over again without getting the same result. How do I do this using PSP X4.
This is the url link [URL]....
View 1 Replies
View Related
Mar 28, 2012
I have a number of panoramic images that I'd like to add to a movie with videostudio but I can't seem to figure out how to pan them properly... the images are long and narrow (as would be expected). is there any way that I can use them with out have a big black boarder top and bottom?
View 3 Replies
View Related
Dec 22, 2010
My still camera facilitates the taking of multiple panoramic shots than can be later stitched into one large file - a narrow, long image (about 5 Mb in my case). I can access this photo as with any other photo. However, if I zoom into it with the intent of panning from left to right so the full height of the image fills the screen, the quality goes way down. It is not the photo file itself because I can bring that up in the Windows photo gallery and it zooms up wonderfully. Also, if I zoom any regular photo to the same extent (about 400x) that image remains pretty good and does not have the same drop off in quality. I looked at all of the options I could find, but saw nothing I could do to improve the quality.
How to pan manually from one photo to another, instead of using the panoramic pic? I tried this using the overlay track but of course the overlay photo covers up the main track.
View 7 Replies
View Related
Mar 4, 2014
I'm trying to bend a set of panoramic photos around a circle. Most of the discussions I see in this forum are about doing this with text using the Type on a path tool. I'd like to achieve the essentially same thing with a photograph. The warp tool in photoshop seems much too clumsy for my needs. Here is an example of the layout i'm talking about, with black boxes instead of images.
View 2 Replies
View Related
Oct 16, 2012
after saving my panoramic the file format is not compatible with Lightroom or any other photosoftware,
View 4 Replies
View Related
Oct 2, 2013
I am trying to make a panaromoc photo. when i go to "file" "new" "Panaromic" Elements shuts down. what should I do?
View 10 Replies
View Related
Apr 3, 2014
How can I resize panoramics so they are all the same width and height? I need uniform sizing to run across a website page in Flash.Â
View 2 Replies
View Related
Nov 27, 2013
This Q must be very old. Why can´t someone invent a sigle button for this I have tried all the things by the book but still when I try to lay text image with white background over an image the white is still there althoug I made it transparent. tried to sa for web as png-8, png-24 and gif. nothing works. To use magic wand gives bad result when applied to text? So what can I do? I am trying to place text over image. I know I could write it over the image but I need the text as a transparent layer some place else.
View 6 Replies
View Related
Aug 20, 2013
I frequently use Photoshop CC to create panoramic images with Photomerge. I've found that as soon as I start the Photomerge process, my computer becomes absurdly slow. I'm not terribly surprised by this - my primary issue is that the computer remains insanely slow long after I've closed Photoshop CC. The only solution I've found is to restart the computer. Even this can be difficult, because the computer becomes slow enough that it takes minutes to shut down.
Â
I want to make a point clear here: I'm not complaining about how my computer becomes slow while using Photomerge. I believe this is to be expected on a laptop such as this. The problem is that my otherwise fast computer becomes wildly slow even after I'm done and Photoshop is closed. Photoshop seems to run just fine otherwise.
Â
I'm using an otherwise problem-free 15'' Macbook Pro with Mountain Lion (10.8.4). Computer specs: 2.2 GHz Intel Core i7, 8 GB 1333 MHz DDR3 RAM, Intel HD Graphics 3000 (512 MB). I currently have memory usage set to 80% under performance preferences.
View 1 Replies
View Related
Mar 31, 2013
I am facing problems while 'stitching' the panoramic photos that i shot. basically, Photoshop's File>Automate>Photomerge and Edit>Auto Align/Blend Layers works good, but FAIL on the LENS DISTORTION.
Â
i had tried to correct it with Filter>Lens Correction, but still not getting perfect result. see the attached image for the results, were you can see the building looks bent. check/download the source images from [URL]......
View 8 Replies
View Related
Aug 29, 2005
I have a panoramic picture made up of three photos and i need some tips on how to get rid of the faint lines visible from where the three photos join.
you can see this in the attached image. under the big rock and in the sky on the right.
View 1 Replies
View Related
Oct 30, 2013
why is the enhance panoramic merge is grayed out on my recent purchase and download of elements 11 photoshop & the premiere 11
View 11 Replies
View Related
Oct 27, 2013
I am using Elements 10 with Windows 8. When I select panoramic merge, the software closes down and I get an error message saying that its encountered a problem and closing dow.Â
View 1 Replies
View Related
May 10, 2011
I can create a signature with image and text as in attachment, (not sure even did that) "DARN"but would like to be able to type directly on a jpeg or gif etc.
View 7 Replies
View Related
May 26, 2013
I used to be able to do this but have forgotten how. I would like to remove the bg from a small image, ie make it's bg transparent, and place that small image on top of a large image, a banner. Not sure what I am doing wrong but when I place the small image on the large one the entire image is transparent, not just the bg.
View 2 Replies
View Related
